[PATCH v3 1/1] platform/x86: asus-wmi: add support for vivobook fan profiles

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add support for vivobook fan profiles wmi call on the ASUS VIVOBOOK
to adjust power limits.

These fan profiles have a different device id than the ROG series
and different order. This reorders the existing modes and adds a new
full speed mode available on these laptops.

As part of keeping the patch clean the throttle_thermal_policy_available
boolean stored in the driver struct is removed and
throttle_thermal_policy_dev is used in place (as on init it is zeroed).

Signed-off-by: Mohamed Ghanmi <mohamed.ghanmi@xxxxxxxxx>
Co-developed-by: Luke D. Jones <luke@xxxxxxxxxx>
Signed-off-by: Luke D. Jones <luke@xxxxxxxxxx>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
---
 drivers/platform/x86/asus-wmi.c            | 93 ++++++++++++----------
 include/linux/platform_data/x86/asus-wmi.h |  1 +
 2 files changed, 51 insertions(+), 43 deletions(-)

diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
index 3c61d75a3..1f54596ca 100644
--- a/drivers/platform/x86/asus-wmi.c
+++ b/drivers/platform/x86/asus-wmi.c
@@ -97,6 +97,11 @@ module_param(fnlock_default, bool, 0444);
 #define ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST	1
 #define ASUS_THROTTLE_THERMAL_POLICY_SILENT	2
 
+#define ASUS_THROTTLE_THERMAL_POLICY_DEFAULT_VIVO	0
+#define ASUS_THROTTLE_THERMAL_POLICY_SILENT_VIVO	1
+#define ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST_VIVO	2
+#define ASUS_THROTTLE_THERMAL_POLICY_FULLSPEED		3
+
 #define USB_INTEL_XUSB2PR		0xD0
 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI	0x9c31
 
@@ -293,8 +298,8 @@ struct asus_wmi {
 	u32 kbd_rgb_dev;
 	bool kbd_rgb_state_available;
 
-	bool throttle_thermal_policy_available;
 	u8 throttle_thermal_policy_mode;
+	u32 throttle_thermal_policy_dev;
 
 	bool cpu_fan_curve_available;
 	bool gpu_fan_curve_available;
@@ -3152,7 +3157,7 @@ static int fan_curve_get_factory_default(struct asus_wmi *asus, u32 fan_dev)
 	int err, fan_idx;
 	u8 mode = 0;
 
-	if (asus->throttle_thermal_policy_available)
+	if (asus->throttle_thermal_policy_dev)
 		mode = asus->throttle_thermal_policy_mode;
 	/* DEVID_<C/G>PU_FAN_CURVE is switched for OVERBOOST vs SILENT */
 	if (mode == 2)
@@ -3359,7 +3364,7 @@ static ssize_t fan_curve_enable_store(struct device *dev,
 		 * For machines with throttle this is the only way to reset fans
 		 * to default mode of operation (does not erase curve data).
 		 */
-		if (asus->throttle_thermal_policy_available) {
+		if (asus->throttle_thermal_policy_dev) {
 			err = throttle_thermal_policy_write(asus);
 			if (err)
 				return err;
@@ -3576,8 +3581,8 @@ static const struct attribute_group asus_fan_curve_attr_group = {
 __ATTRIBUTE_GROUPS(asus_fan_curve_attr);
 
 /*
- * Must be initialised after throttle_thermal_policy_check_present() as
- * we check the status of throttle_thermal_policy_available during init.
+ * Must be initialised after throttle_thermal_policy_dev is set as
+ * we check the status of throttle_thermal_policy_dev during init.
  */
 static int asus_wmi_custom_fan_curve_init(struct asus_wmi *asus)
 {
@@ -3618,38 +3623,37 @@ static int asus_wmi_custom_fan_curve_init(struct asus_wmi *asus)
 }
 
 /* Throttle thermal policy ****************************************************/
-
-static int throttle_thermal_policy_check_present(struct asus_wmi *asus)
+static u8 throttle_thermal_policy_max_mode(struct asus_wmi *asus)
 {
-	u32 result;
-	int err;
-
-	asus->throttle_thermal_policy_available = false;
-
-	err = asus_wmi_get_devstate(asus,
-				    ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY,
-				    &result);
-	if (err) {
-		if (err == -ENODEV)
-			return 0;
-		return err;
-	}
-
-	if (result & ASUS_WMI_DSTS_PRESENCE_BIT)
-		asus->throttle_thermal_policy_available = true;
-
-	return 0;
+	if (asus->throttle_thermal_policy_dev == ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY_VIVO)
+		return ASUS_THROTTLE_THERMAL_POLICY_FULLSPEED;
+	else
+		return ASUS_THROTTLE_THERMAL_POLICY_SILENT;
 }
 
 static int throttle_thermal_policy_write(struct asus_wmi *asus)
 {
-	int err;
-	u8 value;
+	u8 value = asus->throttle_thermal_policy_mode;
 	u32 retval;
+	bool vivo;
+	int err;
 
-	value = asus->throttle_thermal_policy_mode;
+	vivo = asus->throttle_thermal_policy_dev == ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY_VIVO;
+	if (vivo) {
+		switch (value) {
+		case ASUS_THROTTLE_THERMAL_POLICY_DEFAULT:
+			value = ASUS_THROTTLE_THERMAL_POLICY_DEFAULT_VIVO;
+			break;
+		case ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST:
+			value = ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST_VIVO;
+			break;
+		case ASUS_THROTTLE_THERMAL_POLICY_SILENT:
+			value = ASUS_THROTTLE_THERMAL_POLICY_SILENT_VIVO;
+			break;
+		}
+	}
 
-	err = asus_wmi_set_devstate(ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY,
+	err = asus_wmi_set_devstate(asus->throttle_thermal_policy_dev,
 				    value, &retval);
 
 	sysfs_notify(&asus->platform_device->dev.kobj, NULL,
@@ -3679,7 +3683,7 @@ static int throttle_thermal_policy_write(struct asus_wmi *asus)
 
 static int throttle_thermal_policy_set_default(struct asus_wmi *asus)
 {
-	if (!asus->throttle_thermal_policy_available)
+	if (!asus->throttle_thermal_policy_dev)
 		return 0;
 
 	asus->throttle_thermal_policy_mode = ASUS_THROTTLE_THERMAL_POLICY_DEFAULT;
@@ -3689,9 +3693,10 @@ static int throttle_thermal_policy_set_default(struct asus_wmi *asus)
 static int throttle_thermal_policy_switch_next(struct asus_wmi *asus)
 {
 	u8 new_mode = asus->throttle_thermal_policy_mode + 1;
+	u8 max_mode = throttle_thermal_policy_max_mode(asus);
 	int err;
 
-	if (new_mode > ASUS_THROTTLE_THERMAL_POLICY_SILENT)
+	if (new_mode > max_mode)
 		new_mode = ASUS_THROTTLE_THERMAL_POLICY_DEFAULT;
 
 	asus->throttle_thermal_policy_mode = new_mode;
@@ -3722,6 +3727,7 @@ static ssize_t throttle_thermal_policy_store(struct device *dev,
 				    const char *buf, size_t count)
 {
 	struct asus_wmi *asus = dev_get_drvdata(dev);
+	u8 max_mode = throttle_thermal_policy_max_mode(asus);
 	u8 new_mode;
 	int result;
 	int err;
@@ -3730,7 +3736,7 @@ static ssize_t throttle_thermal_policy_store(struct device *dev,
 	if (result < 0)
 		return result;
 
-	if (new_mode > ASUS_THROTTLE_THERMAL_POLICY_SILENT)
+	if (new_mode > max_mode)
 		return -EINVAL;
 
 	asus->throttle_thermal_policy_mode = new_mode;
@@ -3747,7 +3753,10 @@ static ssize_t throttle_thermal_policy_store(struct device *dev,
 	return count;
 }
 
-// Throttle thermal policy: 0 - default, 1 - overboost, 2 - silent
+/*
+ * Throttle thermal policy: 0 - default, 1 - overboost, 2 - silent
+ * Throttle thermal policy vivobook : 0 - default, 1 - silent, 2 - overboost, 3 - fullspeed
+ */
 static DEVICE_ATTR_RW(throttle_thermal_policy);
 
 /* Platform profile ***********************************************************/
@@ -3813,7 +3822,7 @@ static int platform_profile_setup(struct asus_wmi *asus)
 	 * Not an error if a component platform_profile relies on is unavailable
 	 * so early return, skipping the setup of platform_profile.
 	 */
-	if (!asus->throttle_thermal_policy_available)
+	if (!asus->throttle_thermal_policy_dev)
 		return 0;
 
 	dev_info(dev, "Using throttle_thermal_policy for platform_profile support\n");
@@ -4228,7 +4237,7 @@ static void asus_wmi_handle_event_code(int code, struct asus_wmi *asus)
 	if (code == NOTIFY_KBD_FBM || code == NOTIFY_KBD_TTP) {
 		if (asus->fan_boost_mode_available)
 			fan_boost_mode_switch_next(asus);
-		if (asus->throttle_thermal_policy_available)
+		if (asus->throttle_thermal_policy_dev)
 			throttle_thermal_policy_switch_next(asus);
 		return;
 
@@ -4436,7 +4445,7 @@ static umode_t asus_sysfs_is_visible(struct kobject *kobj,
 	else if (attr == &dev_attr_fan_boost_mode.attr)
 		ok = asus->fan_boost_mode_available;
 	else if (attr == &dev_attr_throttle_thermal_policy.attr)
-		ok = asus->throttle_thermal_policy_available;
+		ok = asus->throttle_thermal_policy_dev != 0;
 	else if (attr == &dev_attr_ppt_pl2_sppt.attr)
 		devid = ASUS_WMI_DEVID_PPT_PL2_SPPT;
 	else if (attr == &dev_attr_ppt_pl1_spl.attr)
@@ -4745,16 +4754,15 @@ static int asus_wmi_add(struct platform_device *pdev)
 	else if (asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_TUF_RGB_MODE2))
 		asus->kbd_rgb_dev = ASUS_WMI_DEVID_TUF_RGB_MODE2;
 
+	if (asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY))
+		asus->throttle_thermal_policy_dev = ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY;
+	else if (asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY_VIVO))
+		asus->throttle_thermal_policy_dev = ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY_VIVO;
+
 	err = fan_boost_mode_check_present(asus);
 	if (err)
 		goto fail_fan_boost_mode;
 
-	err = throttle_thermal_policy_check_present(asus);
-	if (err)
-		goto fail_throttle_thermal_policy;
-	else
-		throttle_thermal_policy_set_default(asus);
-
 	err = platform_profile_setup(asus);
 	if (err)
 		goto fail_platform_profile_setup;
@@ -4849,7 +4857,6 @@ static int asus_wmi_add(struct platform_device *pdev)
 fail_input:
 	asus_wmi_sysfs_exit(asus->platform_device);
 fail_sysfs:
-fail_throttle_thermal_policy:
 fail_custom_fan_curve:
 fail_platform_profile_setup:
 	if (asus->platform_profile_support)
diff --git a/include/linux/platform_data/x86/asus-wmi.h b/include/linux/platform_data/x86/asus-wmi.h
index 3eb5cd677..982a63774 100644
--- a/include/linux/platform_data/x86/asus-wmi.h
+++ b/include/linux/platform_data/x86/asus-wmi.h
@@ -64,6 +64,7 @@
 #define ASUS_WMI_DEVID_SCREENPAD_LIGHT	0x00050032
 #define ASUS_WMI_DEVID_FAN_BOOST_MODE	0x00110018
 #define ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY 0x00120075
+#define ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY_VIVO 0x00110019
 
 /* Misc */
 #define ASUS_WMI_DEVID_PANEL_OD		0x00050019
-- 
2.44.0





[Index of Archives]     [Linux Kernel Development]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux