Re: [PATCH v1 1/3] Documentation/ABI: Add document for Mellanox PMC driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 17 Apr 2024, Shravan Kumar Ramani wrote:

> The sysfs interface is created for programming and monitoring the
> performance counters in various HW blocks of Mellanox BlueField-1,
> BlueField-2 and BlueField-3.
> 
> Signed-off-by: Shravan Kumar Ramani <shravankr@xxxxxxxxxx>
> Reviewed-by: David Thompson <davthompson@xxxxxxxxxx>
> ---

This documents the existing sysfs files? Which is good, thank you!

However, there's still no PATCH 4/ which would document the new interface 
added by this series, namely use_odd_counter and count_clock, am I 
correct?

-- 
 i.

>  .../ABI/testing/sysfs-platform-mellanox-pmc   | 49 +++++++++++++++++++
>  1 file changed, 49 insertions(+)
>  create mode 100644 Documentation/ABI/testing/sysfs-platform-mellanox-pmc
> 
> diff --git a/Documentation/ABI/testing/sysfs-platform-mellanox-pmc b/Documentation/ABI/testing/sysfs-platform-mellanox-pmc
> new file mode 100644
> index 000000000000..47094024dbeb
> --- /dev/null
> +++ b/Documentation/ABI/testing/sysfs-platform-mellanox-pmc
> @@ -0,0 +1,49 @@
> +HID           Driver         Description
> +MLNXBFD0      mlxbf-pmc      Performance counters (BlueField-1)
> +MLNXBFD1      mlxbf-pmc      Performance counters (BlueField-2)
> +MLNXBFD2      mlxbf-pmc      Performance counters (BlueField-3)
> +
> +What:		/sys/bus/platform/devices/<HID>/hwmon/hwmonX/<block>/event_list
> +Date:		Dec 2020
> +KernelVersion:	5.10
> +Contact:	"Shravan Kumar Ramani <shravankr@xxxxxxxxxx>"
> +Description:
> +		List of events supported by the counters in the specific block.
> +		It is used to extract the event number or ID associated with
> +		each event.
> +
> +What:		/sys/bus/platform/devices/<HID>/hwmon/hwmonX/<block>/event<N>
> +Date:		Dec 2020
> +KernelVersion:	5.10
> +Contact:	"Shravan Kumar Ramani <shravankr@xxxxxxxxxx>"
> +Description:
> +		Event monitored by corresponding counter. This is used to
> +		program or read back the event that should be or is currently
> +		being monitored by counter<N>.
> +
> +What:		/sys/bus/platform/devices/<HID>/hwmon/hwmonX/<block>/counter<N>
> +Date:		Dec 2020
> +KernelVersion:	5.10
> +Contact:	"Shravan Kumar Ramani <shravankr@xxxxxxxxxx>"
> +Description:
> +		Counter value of the event being monitored. This is used to
> +		read the counter value of the event which was programmed using
> +		event<N>. This is also used to clear or reset the counter value.
> +
> +What:		/sys/bus/platform/devices/<HID>/hwmon/hwmonX/<block>/enable
> +Date:		Dec 2020
> +KernelVersion:	5.10
> +Contact:	"Shravan Kumar Ramani <shravankr@xxxxxxxxxx>"
> +Description:
> +		Start or stop counters. This is used to start the counters
> +		for monitoring the programmed events and also to stop the
> +		counters after the desired duration.
> +
> +What:		/sys/bus/platform/devices/<HID>/hwmon/hwmonX/<block>/<reg>
> +Date:		Dec 2020
> +KernelVersion:	5.10
> +Contact:	"Shravan Kumar Ramani <shravankr@xxxxxxxxxx>"
> +Description:
> +		Value of register. This is used to read or reset the registers
> +		where various performance statistics are counted for each block.
> +
> 




[Index of Archives]     [Linux Kernel Development]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux