On Sun, 14 Apr 2024, Luke D. Jones wrote:
> From: Mohamed Ghanmi <mohamed.ghanmi@xxxxxxxxx>
>
> Add support for vivobook fan profiles wmi call on the ASUS VIVOBOOK
> to adjust power limits.
>
> These fan profiles have a different device id than the ROG series.
> and different order.
Fix grammar.
> This reorders the existing modes and adds a new
> full speed mode available on these laptops.
>
> As part of keeping the patch clean the throttle_thermal_policy_available
> boolean stored in the driver struct is removed and
> throttle_thermal_policy_dev is used in place (as on init it is zeroed).
>
> Signed-off-by: Mohamed Ghanmi <mohamed.ghanmi@xxxxxxxxx>
> Co-developed-by: Luke D. Jones <luke@xxxxxxxxxx>
> Signed-off-by: Luke D. Jones <luke@xxxxxxxxxx>
> ---
> drivers/platform/x86/asus-wmi.c | 100 +++++++++++----------
> include/linux/platform_data/x86/asus-wmi.h | 1 +
> 2 files changed, 55 insertions(+), 46 deletions(-)
>
> diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
> index 2d2b4eca7fd8..439d330fb80b 100644
> --- a/drivers/platform/x86/asus-wmi.c
> +++ b/drivers/platform/x86/asus-wmi.c
> @@ -97,6 +97,11 @@ module_param(fnlock_default, bool, 0444);
> #define ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST 1
> #define ASUS_THROTTLE_THERMAL_POLICY_SILENT 2
>
> +#define ASUS_THROTTLE_THERMAL_POLICY_DEFAULT_VIVO 0
> +#define ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST_VIVO 2
> +#define ASUS_THROTTLE_THERMAL_POLICY_SILENT_VIVO 1
Any good reason why these are not in numerical order?
> +#define ASUS_THROTTLE_THERMAL_POLICY_FULLSPEED 3
> +
> #define USB_INTEL_XUSB2PR 0xD0
> #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI 0x9c31
>
> @@ -285,8 +290,8 @@ struct asus_wmi {
> u32 kbd_rgb_dev;
> bool kbd_rgb_state_available;
>
> - bool throttle_thermal_policy_available;
> u8 throttle_thermal_policy_mode;
> + u32 throttle_thermal_policy_dev;
>
> bool cpu_fan_curve_available;
> bool gpu_fan_curve_available;
> @@ -3153,7 +3158,7 @@ static int fan_curve_get_factory_default(struct asus_wmi *asus, u32 fan_dev)
> int err, fan_idx;
> u8 mode = 0;
>
> - if (asus->throttle_thermal_policy_available)
> + if (asus->throttle_thermal_policy_dev)
> mode = asus->throttle_thermal_policy_mode;
> /* DEVID_<C/G>PU_FAN_CURVE is switched for OVERBOOST vs SILENT */
> if (mode == 2)
> @@ -3360,7 +3365,7 @@ static ssize_t fan_curve_enable_store(struct device *dev,
> * For machines with throttle this is the only way to reset fans
> * to default mode of operation (does not erase curve data).
> */
> - if (asus->throttle_thermal_policy_available) {
> + if (asus->throttle_thermal_policy_dev) {
> err = throttle_thermal_policy_write(asus);
> if (err)
> return err;
> @@ -3577,8 +3582,8 @@ static const struct attribute_group asus_fan_curve_attr_group = {
> __ATTRIBUTE_GROUPS(asus_fan_curve_attr);
>
> /*
> - * Must be initialised after throttle_thermal_policy_check_present() as
> - * we check the status of throttle_thermal_policy_available during init.
> + * Must be initialised after throttle_thermal_policy_dev is set as
> + * we check the status of throttle_thermal_policy_dev during init.
> */
> static int asus_wmi_custom_fan_curve_init(struct asus_wmi *asus)
> {
> @@ -3619,38 +3624,31 @@ static int asus_wmi_custom_fan_curve_init(struct asus_wmi *asus)
> }
>
> /* Throttle thermal policy ****************************************************/
> -
> -static int throttle_thermal_policy_check_present(struct asus_wmi *asus)
> -{
> - u32 result;
> - int err;
> -
> - asus->throttle_thermal_policy_available = false;
> -
> - err = asus_wmi_get_devstate(asus,
> - ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY,
> - &result);
> - if (err) {
> - if (err == -ENODEV)
> - return 0;
> - return err;
> - }
> -
> - if (result & ASUS_WMI_DSTS_PRESENCE_BIT)
> - asus->throttle_thermal_policy_available = true;
> -
> - return 0;
> -}
> -
> static int throttle_thermal_policy_write(struct asus_wmi *asus)
> {
> - int err;
> - u8 value;
> + u8 value = asus->throttle_thermal_policy_mode;
> u32 retval;
> + bool vivo;
> + int err;
>
> - value = asus->throttle_thermal_policy_mode;
> + vivo = asus->throttle_thermal_policy_dev == ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY_VIVO;
> + if (vivo) {
> + switch (value) {
> + case ASUS_THROTTLE_THERMAL_POLICY_DEFAULT:
> + value = ASUS_THROTTLE_THERMAL_POLICY_DEFAULT_VIVO;
> + break;
> + case ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST:
> + value = ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST_VIVO;
> + break;
> + case ASUS_THROTTLE_THERMAL_POLICY_SILENT:
> + value = ASUS_THROTTLE_THERMAL_POLICY_SILENT_VIVO;
> + break;
> + default:
> + break;
> + }
> + }
>
> - err = asus_wmi_set_devstate(ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY,
> + err = asus_wmi_set_devstate(asus->throttle_thermal_policy_dev,
> value, &retval);
>
> sysfs_notify(&asus->platform_device->dev.kobj, NULL,
> @@ -3680,7 +3678,7 @@ static int throttle_thermal_policy_write(struct asus_wmi *asus)
>
> static int throttle_thermal_policy_set_default(struct asus_wmi *asus)
> {
> - if (!asus->throttle_thermal_policy_available)
> + if (!asus->throttle_thermal_policy_dev)
> return 0;
>
> asus->throttle_thermal_policy_mode = ASUS_THROTTLE_THERMAL_POLICY_DEFAULT;
> @@ -3690,9 +3688,14 @@ static int throttle_thermal_policy_set_default(struct asus_wmi *asus)
> static int throttle_thermal_policy_switch_next(struct asus_wmi *asus)
> {
> u8 new_mode = asus->throttle_thermal_policy_mode + 1;
> + bool vivo;
> int err;
>
> - if (new_mode > ASUS_THROTTLE_THERMAL_POLICY_SILENT)
> + vivo = asus->throttle_thermal_policy_dev == ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY_VIVO;
> + if (!vivo && new_mode > ASUS_THROTTLE_THERMAL_POLICY_SILENT)
> + new_mode = ASUS_THROTTLE_THERMAL_POLICY_DEFAULT;
> +
> + if (vivo && new_mode > ASUS_THROTTLE_THERMAL_POLICY_FULLSPEED)
> new_mode = ASUS_THROTTLE_THERMAL_POLICY_DEFAULT;
Hmm, add a throttle_thermal_policy_max_mode() helper instead so you can do
just this:
if (new_mode > throttle_thermal_policy_max_mode(...))
new_mode = ASUS_THROTTLE_THERMAL_POLICY_DEFAULT;
> asus->throttle_thermal_policy_mode = new_mode;
> @@ -3725,13 +3728,17 @@ static ssize_t throttle_thermal_policy_store(struct device *dev,
> struct asus_wmi *asus = dev_get_drvdata(dev);
> u8 new_mode;
> int result;
> + bool vivo;
> int err;
>
> result = kstrtou8(buf, 10, &new_mode);
> if (result < 0)
> return result;
>
> - if (new_mode > ASUS_THROTTLE_THERMAL_POLICY_SILENT)
> + vivo = asus->throttle_thermal_policy_dev == ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY_VIVO;
> + if (vivo && new_mode > ASUS_THROTTLE_THERMAL_POLICY_FULLSPEED)
> + return -EINVAL;
> + else if (!vivo && new_mode > ASUS_THROTTLE_THERMAL_POLICY_SILENT)
Use the throttle_thermal_policy_max_mode() helper here too.
> return -EINVAL;
>
> asus->throttle_thermal_policy_mode = new_mode;
--
i.
