[PATCH 2/2] platform/x86: thinkpad_acpi: Fix to correct wrong temp reporting on some ThinkPads

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Added non-standard thermal register support for some ThinkPads.

Some of the Thinkpads use a non-standard ECFW which use different
thermal register addresses.
This is a fix to correct the wrong temperature reporting on
those systems.

Tested on Lenovo ThinkPad L13 Yoga Gen2

Suggested-by: Mark Pearson <mpearson-lenovo@xxxxxxxxx>
Signed-off-by: Vishnu Sankar <vishnuocv@xxxxxxxxx>
---
-Improvements as requested.
-Improved the readability in case TPACPI_THERMAL_TPEC_12.
-idx < 8 from idx idx <=7 to match idx = 8
-KILO used from linux/units.h instead of 1000.
---
---
 drivers/platform/x86/thinkpad_acpi.c | 74 +++++++++++++++++++++++++---
 1 file changed, 68 insertions(+), 6 deletions(-)

diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 2428c8bd0fa2..9be114572f17 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -69,6 +69,7 @@
 #include <linux/sysfs.h>
 #include <linux/types.h>
 #include <linux/uaccess.h>
+#include <linux/units.h>
 #include <linux/workqueue.h>
 
 #include <acpi/battery.h>
@@ -6126,12 +6127,15 @@ enum thermal_access_mode {
 	TPACPI_THERMAL_ACPI_TMP07,	/* Use ACPI TMP0-7 */
 	TPACPI_THERMAL_ACPI_UPDT,	/* Use ACPI TMP0-7 with UPDT */
 	TPACPI_THERMAL_TPEC_8,		/* Use ACPI EC regs, 8 sensors */
+	TPACPI_THERMAL_TPEC_12,		/* Use ACPI EC regs, 12 sensors */
 	TPACPI_THERMAL_TPEC_16,		/* Use ACPI EC regs, 16 sensors */
 };
 
 enum { /* TPACPI_THERMAL_TPEC_* */
 	TP_EC_THERMAL_TMP0 = 0x78,	/* ACPI EC regs TMP 0..7 */
 	TP_EC_THERMAL_TMP8 = 0xC0,	/* ACPI EC regs TMP 8..15 */
+	TP_EC_THERMAL_TMP0_NS = 0xA8,	/* ACPI EC Non-Standard regs TMP 0..7 */
+	TP_EC_THERMAL_TMP8_NS = 0xB8,	/* ACPI EC Non-standard regs TMP 8..11 */
 	TP_EC_FUNCREV      = 0xEF,      /* ACPI EC Functional revision */
 	TP_EC_THERMAL_TMP_NA = -128,	/* ACPI EC sensor not available */
 
@@ -6144,8 +6148,22 @@ struct ibm_thermal_sensors_struct {
 	s32 temp[TPACPI_MAX_THERMAL_SENSORS];
 };
 
+static const struct tpacpi_quirk thermal_quirk_table[] __initconst = {
+	/* Non-standard address for thermal registers on some ThinkPads */
+	TPACPI_Q_LNV3('R', '1', 'F', true),	/* L13 Yoga Gen 2 */
+	TPACPI_Q_LNV3('N', '2', 'U', true),	/* X13 Yoga Gen 2*/
+	TPACPI_Q_LNV3('R', '0', 'R', true),	/* L380 */
+	TPACPI_Q_LNV3('R', '1', '5', true),	/* L13 Yoga Gen 1*/
+	TPACPI_Q_LNV3('R', '1', '0', true),	/* L390 */
+	TPACPI_Q_LNV3('N', '2', 'L', true),	/* X13 Yoga Gen 1*/
+	TPACPI_Q_LNV3('R', '0', 'T', true),	/* 11e Gen5 GL*/
+	TPACPI_Q_LNV3('R', '1', 'D', true),	/* 11e Gen5 GL-R*/
+	TPACPI_Q_LNV3('R', '0', 'V', true),	/* 11e Gen5 KL-Y*/
+};
+
 static enum thermal_access_mode thermal_read_mode;
 static bool thermal_use_labels;
+static bool thermal_with_ns_address;	/*Non-standard thermal reg address*/
 
 /* Function to check thermal read mode */
 static enum thermal_access_mode thermal_read_mode_check(void)
@@ -6168,6 +6186,16 @@ static enum thermal_access_mode thermal_read_mode_check(void)
 		if (!acpi_ec_read(TP_EC_FUNCREV, &ver))
 			pr_warn("Thinkpad ACPI EC unable to access EC version\n");
 
+		/* Quirks to check non-standard EC */
+		thermal_with_ns_address = tpacpi_check_quirks(thermal_quirk_table,
+							ARRAY_SIZE(thermal_quirk_table));
+
+		/* Support for Thinkpads with non-standard address */
+		if (thermal_with_ns_address) {
+			pr_info("ECFW with non-standard thermal registers found\n");
+			return TPACPI_THERMAL_TPEC_12;
+		}
+
 		ta1 = ta2 = 0;
 		for (i = 0; i < 8; i++) {
 			if (acpi_ec_read(TP_EC_THERMAL_TMP0 + i, &t)) {
@@ -6239,6 +6267,20 @@ static int thermal_get_sensor(int idx, s32 *value)
 		}
 		break;
 
+	/* The Non-standard EC uses 12 Thermal areas */
+	case TPACPI_THERMAL_TPEC_12:
+		if (idx >= 12)
+			return -EINVAL;
+
+		t = idx < 8 ? TP_EC_THERMAL_TMP0_NS + idx :
+				TP_EC_THERMAL_TMP8_NS + (idx - 8);
+
+		if (!acpi_ec_read(t, &tmp))
+			return -EIO;
+
+		*value = tmp * KILO;
+		return 0;
+
 	case TPACPI_THERMAL_ACPI_UPDT:
 		if (idx <= 7) {
 			snprintf(tmpi, sizeof(tmpi), "TMP%c", '0' + idx);
@@ -6284,6 +6326,8 @@ static int thermal_get_sensors(struct ibm_thermal_sensors_struct *s)
 
 	if (thermal_read_mode == TPACPI_THERMAL_TPEC_16)
 		n = 16;
+	else if (thermal_read_mode == TPACPI_THERMAL_TPEC_12)
+		n = 12;
 
 	for (i = 0 ; i < n; i++) {
 		res = thermal_get_sensor(i, &s->temp[i]);
@@ -6382,18 +6426,36 @@ static struct attribute *thermal_temp_input_attr[] = {
 	NULL
 };
 
+#define to_dev_attr(_attr) container_of(_attr, struct device_attribute, attr)
+
 static umode_t thermal_attr_is_visible(struct kobject *kobj,
 				       struct attribute *attr, int n)
 {
-	if (thermal_read_mode == TPACPI_THERMAL_NONE)
+	struct device_attribute *dev_attr = to_dev_attr(attr);
+	struct sensor_device_attribute *sensor_attr =
+					to_sensor_dev_attr(dev_attr);
+
+	int idx = sensor_attr->index;
+
+	switch (thermal_read_mode) {
+	case TPACPI_THERMAL_NONE:
 		return 0;
 
-	if (attr == THERMAL_ATTRS(8) || attr == THERMAL_ATTRS(9) ||
-	    attr == THERMAL_ATTRS(10) || attr == THERMAL_ATTRS(11) ||
-	    attr == THERMAL_ATTRS(12) || attr == THERMAL_ATTRS(13) ||
-	    attr == THERMAL_ATTRS(14) || attr == THERMAL_ATTRS(15)) {
-		if (thermal_read_mode != TPACPI_THERMAL_TPEC_16)
+	case TPACPI_THERMAL_ACPI_TMP07:
+	case TPACPI_THERMAL_ACPI_UPDT:
+	case TPACPI_THERMAL_TPEC_8:
+		if (idx >= 8)
 			return 0;
+		break;
+
+	case TPACPI_THERMAL_TPEC_12:
+		if (idx >= 12)
+			return 0;
+		break;
+
+	default:
+		break;
+
 	}
 
 	return attr->mode;
-- 
2.34.1





[Index of Archives]     [Linux Kernel Development]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux