If some TPMI features are disabled, don't create auxiliary devices. In this way feature drivers will not load. While creating auxiliary devices, call tpmi_read_feature_status() to check feature state and return if the feature is disabled without creating a device. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx> Reviewed-by: Hans de Goede <hdegoede@xxxxxxxxxx> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx> --- v3 - Rebased on top of /pdx86/platform-drivers-x86 review-hans v2 - Add comment for returning -EOPNOTSUPP drivers/platform/x86/intel/tpmi.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/drivers/platform/x86/intel/tpmi.c b/drivers/platform/x86/intel/tpmi.c index 311abcac894a..09972e2b8a06 100644 --- a/drivers/platform/x86/intel/tpmi.c +++ b/drivers/platform/x86/intel/tpmi.c @@ -598,9 +598,21 @@ static int tpmi_create_device(struct intel_tpmi_info *tpmi_info, struct intel_vsec_device *vsec_dev = tpmi_info->vsec_dev; char feature_id_name[TPMI_FEATURE_NAME_LEN]; struct intel_vsec_device *feature_vsec_dev; + struct tpmi_feature_state feature_state; struct resource *res, *tmp; const char *name; - int i; + int i, ret; + + ret = tpmi_read_feature_status(tpmi_info, pfs->pfs_header.tpmi_id, &feature_state); + if (ret) + return ret; + + /* + * If not enabled, continue to look at other features in the PFS, so return -EOPNOTSUPP. + * This will not cause failure of loading of this driver. + */ + if (!feature_state.enabled) + return -EOPNOTSUPP; name = intel_tpmi_name(pfs->pfs_header.tpmi_id); if (!name) -- 2.40.1
