Re: [PATCH RFC] platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On 12/1/23 11:47, Shin'ichiro Kawasaki wrote:
> p2sb_bar() unhides P2SB device to get resources from the device. It
> guards the operation by locking pci_rescan_remove_lock so that parallel
> rescans do not find the P2SB device. However, this lock causes deadlock
> when PCI bus rescan is triggered by /sys/bus/pci/rescan. The rescan
> locks pci_rescan_remove_lock and probes PCI devices. When PCI devices
> call p2sb_bar() during probe, it locks pci_rescan_remove_lock again.
> Hence the deadlock.
> 
> To avoid the deadlock, do not lock pci_rescan_remove_lock in p2sb_bar().
> Instead, do the lock at fs_initcall. Introduce p2sb_cache_resources()
> for fs_initcall which gets and caches the P2SB resources. At p2sb_bar(),
> refer the cache and return to the caller.
> 
> Link: https://lore.kernel.org/linux-pci/6xb24fjmptxxn5js2fjrrddjae6twex5bjaftwqsuawuqqqydx@7cl3uik5ef6j/
> Suggested-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
> Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@xxxxxxx>
> ---
> This patch reflects discussions held at the Link tag. I confirmed this patch
> fixes the problem using a system with i2c_i801 device, building i2c_i801
> module as both built-in and loadable. Reviews will be appreicated.

Andy, you know this code best, can you review this patch please?

Regards,

Hans



> 
>  drivers/platform/x86/p2sb.c | 125 +++++++++++++++++++++++++-----------
>  1 file changed, 87 insertions(+), 38 deletions(-)
> 
> diff --git a/drivers/platform/x86/p2sb.c b/drivers/platform/x86/p2sb.c
> index 1cf2471d54dd..97e9b44f5f1a 100644
> --- a/drivers/platform/x86/p2sb.c
> +++ b/drivers/platform/x86/p2sb.c
> @@ -26,6 +26,16 @@ static const struct x86_cpu_id p2sb_cpu_ids[] = {
>  	{}
>  };
>  
> +/* Cache BAR0 of P2SB device from function 0 ot 7 */
> +#define NR_P2SB_RES_CACHE 8
> +
> +struct p2sb_res_cache {
> +	u32 bus_dev_id;
> +	struct resource res;
> +};
> +
> +static struct p2sb_res_cache p2sb_resources[NR_P2SB_RES_CACHE];
> +
>  static int p2sb_get_devfn(unsigned int *devfn)
>  {
>  	unsigned int fn = P2SB_DEVFN_DEFAULT;
> @@ -39,8 +49,13 @@ static int p2sb_get_devfn(unsigned int *devfn)
>  	return 0;
>  }
>  
> +static bool p2sb_invalid_resource(struct resource *res)
> +{
> +	return res->flags == 0;
> +}
> +
>  /* Copy resource from the first BAR of the device in question */
> -static int p2sb_read_bar0(struct pci_dev *pdev, struct resource *mem)
> +static void p2sb_read_bar0(struct pci_dev *pdev, struct resource *mem)
>  {
>  	struct resource *bar0 = &pdev->resource[0];
>  
> @@ -56,48 +71,29 @@ static int p2sb_read_bar0(struct pci_dev *pdev, struct resource *mem)
>  	mem->end = bar0->end;
>  	mem->flags = bar0->flags;
>  	mem->desc = bar0->desc;
> -
> -	return 0;
>  }
>  
> -static int p2sb_scan_and_read(struct pci_bus *bus, unsigned int devfn, struct resource *mem)
> +static int p2sb_scan_and_cache(struct pci_bus *bus, unsigned int devfn)
>  {
>  	struct pci_dev *pdev;
>  	int ret;
> +	struct p2sb_res_cache *cache = &p2sb_resources[PCI_FUNC(devfn)];
>  
>  	pdev = pci_scan_single_device(bus, devfn);
> -	if (!pdev)
> +	if (!pdev || p2sb_invalid_resource(&pdev->resource[0]))
>  		return -ENODEV;
>  
> -	ret = p2sb_read_bar0(pdev, mem);
> +	p2sb_read_bar0(pdev, &cache->res);
> +	cache->bus_dev_id = bus->dev.id;
>  
>  	pci_stop_and_remove_bus_device(pdev);
>  	return ret;
>  }
>  
> -/**
> - * p2sb_bar - Get Primary to Sideband (P2SB) bridge device BAR
> - * @bus: PCI bus to communicate with
> - * @devfn: PCI slot and function to communicate with
> - * @mem: memory resource to be filled in
> - *
> - * The BIOS prevents the P2SB device from being enumerated by the PCI
> - * subsystem, so we need to unhide and hide it back to lookup the BAR.
> - *
> - * if @bus is NULL, the bus 0 in domain 0 will be used.
> - * If @devfn is 0, it will be replaced by devfn of the P2SB device.
> - *
> - * Caller must provide a valid pointer to @mem.
> - *
> - * Locking is handled by pci_rescan_remove_lock mutex.
> - *
> - * Return:
> - * 0 on success or appropriate errno value on error.
> - */
> -int p2sb_bar(struct pci_bus *bus, unsigned int devfn, struct resource *mem)
> +static int p2sb_cache_resources(void)
>  {
> -	struct pci_dev *pdev_p2sb;
> -	unsigned int devfn_p2sb;
> +	struct pci_bus *bus;
> +	unsigned int devfn_p2sb, slot_p2sb, fn;
>  	u32 value = P2SBC_HIDE;
>  	int ret;
>  
> @@ -106,8 +102,8 @@ int p2sb_bar(struct pci_bus *bus, unsigned int devfn, struct resource *mem)
>  	if (ret)
>  		return ret;
>  
> -	/* if @bus is NULL, use bus 0 in domain 0 */
> -	bus = bus ?: pci_find_bus(0, 0);
> +	/* Assume P2SB is on the bus 0 in domain 0 */
> +	bus = pci_find_bus(0, 0);
>  
>  	/*
>  	 * Prevent concurrent PCI bus scan from seeing the P2SB device and
> @@ -115,18 +111,31 @@ int p2sb_bar(struct pci_bus *bus, unsigned int devfn, struct resource *mem)
>  	 */
>  	pci_lock_rescan_remove();
>  
> -	/* Unhide the P2SB device, if needed */
> +	/*
> +	 * The BIOS prevents the P2SB device from being enumerated by the PCI
> +	 * subsystem, so we need to unhide and hide it back to lookup the BAR.
> +	 * Unhide the P2SB device here, if needed.
> +	 */
>  	pci_bus_read_config_dword(bus, devfn_p2sb, P2SBC, &value);
>  	if (value & P2SBC_HIDE)
>  		pci_bus_write_config_dword(bus, devfn_p2sb, P2SBC, 0);
>  
> -	pdev_p2sb = pci_scan_single_device(bus, devfn_p2sb);
> -	if (devfn)
> -		ret = p2sb_scan_and_read(bus, devfn, mem);
> -	else
> -		ret = p2sb_read_bar0(pdev_p2sb, mem);
> -	pci_stop_and_remove_bus_device(pdev_p2sb);
> +	/* Scan the P2SB device and cache its BAR0 */
> +	ret = p2sb_scan_and_cache(bus, devfn_p2sb);
> +	if (ret)
> +		goto out;
>  
> +	/*
> +	 * When function number of the P2SB device is zero, scan other function
> +	 * numbers. If devices are available, cache their BAR0.
> +	 */
> +	if (!PCI_FUNC(devfn_p2sb)) {
> +		slot_p2sb = PCI_SLOT(devfn_p2sb);
> +		for (fn = 1; fn < 8; fn++)
> +			p2sb_scan_and_cache(bus, PCI_DEVFN(slot_p2sb, fn));
> +	}
> +
> +out:
>  	/* Hide the P2SB device, if it was hidden */
>  	if (value & P2SBC_HIDE)
>  		pci_bus_write_config_dword(bus, devfn_p2sb, P2SBC, P2SBC_HIDE);
> @@ -136,9 +145,49 @@ int p2sb_bar(struct pci_bus *bus, unsigned int devfn, struct resource *mem)
>  	if (ret)
>  		return ret;
>  
> -	if (mem->flags == 0)
> +	return 0;
> +}
> +
> +/**
> + * p2sb_bar - Get Primary to Sideband (P2SB) bridge device BAR
> + * @bus: PCI bus to communicate with
> + * @devfn: PCI slot and function to communicate with
> + * @mem: memory resource to be filled in
> + *
> + * if @bus is NULL, the bus 0 in domain 0 will be used.
> + * If @devfn is 0, it will be replaced by devfn of the P2SB device.
> + *
> + * Caller must provide a valid pointer to @mem.
> + *
> + * Return:
> + * 0 on success or appropriate errno value on error.
> + */
> +int p2sb_bar(struct pci_bus *bus, unsigned int devfn, struct resource *mem)
> +{
> +	int ret;
> +	struct p2sb_res_cache *cache;
> +
> +	bus = bus ? bus : pci_find_bus(0, 0);
> +
> +	if (!devfn) {
> +		ret = p2sb_get_devfn(&devfn);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	cache = &p2sb_resources[PCI_FUNC(devfn)];
> +	if (p2sb_invalid_resource(&cache->res) ||
> +	    cache->bus_dev_id != bus->dev.id)
>  		return -ENODEV;
>  
> +	memcpy(mem, &cache->res, sizeof(*mem));
>  	return 0;
>  }
>  EXPORT_SYMBOL_GPL(p2sb_bar);
> +
> +static int __init p2sb_fs_init(void)
> +{
> +	p2sb_cache_resources();
> +	return 0;
> +}
> +fs_initcall(p2sb_fs_init);





[Index of Archives]     [Linux Kernel Development]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux