The default kernel policy will allow modern machines to effectively put all PCIe bridges into PCI D3. This policy doesn't match what Windows uses. In Windows the driver stack includes a "Power Engine Plugin" (uPEP driver) to decide the policy for integrated devices using PEP device constraints. Device constraints are expressed as a number in the _DSM of the PNP0D80 device and exported by the kernel in acpi_get_lps0_constraint(). Add support for SoCs to use constraints on Linux as well for deciding target state for integrated PCI bridges. Disable existing production SoCs by default with this change. Link: https://learn.microsoft.com/en-us/windows-hardware/design/device-experiences/platform-design-for-modern-standby#low-power-core-silicon-cpu-soc-dram Acked-by: Hans de Goede <hdegoede@xxxxxxxxxx> Signed-off-by: Mario Limonciello <mario.limonciello@xxxxxxx> --- drivers/platform/x86/amd/pmc/pmc.c | 57 ++++++++++++++++++++++++++++++ 1 file changed, 57 insertions(+) diff --git a/drivers/platform/x86/amd/pmc/pmc.c b/drivers/platform/x86/amd/pmc/pmc.c index c3104714b480..9aa6cf4fabf1 100644 --- a/drivers/platform/x86/amd/pmc/pmc.c +++ b/drivers/platform/x86/amd/pmc/pmc.c @@ -793,6 +793,61 @@ static int amd_pmc_czn_wa_irq1(struct amd_pmc_dev *pdev) return 0; } +static inline void amd_pmc_apply_constraint(struct pci_dev *pci_dev, bool apply) +{ + if (apply) + pci_d3cold_disable(pci_dev); + else + pci_d3cold_enable(pci_dev); +} + +/* + * Constraints are specified in the ACPI LPS0 device and specify what the + * platform intended for devices that are internal to the SoC. + * + * If a constraint is present and >= to ACPI_STATE_D3, then enable D3. + * If a constraint is not present or < ACPI_STATE_D3, then disable D3. + */ +static void amd_pmc_check_constraints(struct amd_pmc_dev *pdev, bool apply) +{ + struct pci_dev *pci_dev = NULL; + struct acpi_device *adev; + int constraint; + + switch (pdev->cpu_id) { + case AMD_CPU_ID_RV: + case AMD_CPU_ID_RN: + case AMD_CPU_ID_YC: + case AMD_CPU_ID_CB: + case AMD_CPU_ID_PS: + case AMD_CPU_ID_SP: + return; + default: + break; + } + + while ((pci_dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pci_dev))) { + adev = ACPI_COMPANION(&pci_dev->dev); + if (!adev) + continue; + constraint = acpi_get_lps0_constraint(adev); + dev_dbg(&pci_dev->dev, "constraint is %d\n", constraint); + + switch (constraint) { + case ACPI_STATE_UNKNOWN: + case ACPI_STATE_D0: + case ACPI_STATE_D1: + case ACPI_STATE_D2: + amd_pmc_apply_constraint(pci_dev, apply); + continue; + /* use the logic pci_bridge_d3_possible() to decide */ + case ACPI_STATE_D3: + default: + continue; + } + } +} + static int amd_pmc_verify_czn_rtc(struct amd_pmc_dev *pdev, u32 *arg) { struct rtc_device *rtc_device; @@ -1099,6 +1154,7 @@ static int amd_pmc_probe(struct platform_device *pdev) amd_pmc_quirks_init(dev); } + amd_pmc_check_constraints(dev, TRUE); amd_pmc_dbgfs_register(dev); pm_report_max_hw_sleep(U64_MAX); return 0; @@ -1114,6 +1170,7 @@ static void amd_pmc_remove(struct platform_device *pdev) if (IS_ENABLED(CONFIG_SUSPEND)) acpi_unregister_lps0_dev(&amd_pmc_s2idle_dev_ops); + amd_pmc_check_constraints(dev, FALSE); amd_pmc_dbgfs_unregister(dev); pci_dev_put(dev->rdev); mutex_destroy(&dev->lock); -- 2.34.1
