On Mon, 13 Nov 2023, Mark Pearson wrote:
> Some new Thinkpads have a new improved performance mode available.
> Add support to make this mode usable.
>
> To avoid having to create a new profile, just use the improved performance
> mode in place of the existing performance mode, when available.
>
> Tested on P14s AMD G4 AMD.
>
> Signed-off-by: Mark Pearson <mpearson-lenovo@xxxxxxxxx>
> ---
> Changes in v2: updated implementation for DYTC_UP_SUPPORT define
> Changes in v3:
> - Add in missing BIT for define, somehow lost in previous commit
> - Cosmetic clean-ups
>
> drivers/platform/x86/thinkpad_acpi.c | 28 ++++++++++++++++++++++++++++
> 1 file changed, 28 insertions(+)
>
> diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
> index ad460417f901..3a9d2cc71b6a 100644
> --- a/drivers/platform/x86/thinkpad_acpi.c
> +++ b/drivers/platform/x86/thinkpad_acpi.c
> @@ -10136,6 +10136,7 @@ static struct ibm_struct proxsensor_driver_data = {
>
> #define DYTC_CMD_SET 1 /* To enable/disable IC function mode */
> #define DYTC_CMD_MMC_GET 8 /* To get current MMC function and mode */
> +#define DYTC_CMD_UP_CAP 0xA /* To get Ultra-performance capability */
> #define DYTC_CMD_RESET 0x1ff /* To reset back to default */
>
> #define DYTC_CMD_FUNC_CAP 3 /* To get DYTC capabilities */
> @@ -10152,6 +10153,7 @@ static struct ibm_struct proxsensor_driver_data = {
>
> #define DYTC_FUNCTION_STD 0 /* Function = 0, standard mode */
> #define DYTC_FUNCTION_CQL 1 /* Function = 1, lap mode */
> +#define DYTC_FUNCTION_TMS 9 /* Function = 9, TMS mode */
> #define DYTC_FUNCTION_MMC 11 /* Function = 11, MMC mode */
> #define DYTC_FUNCTION_PSC 13 /* Function = 13, PSC mode */
> #define DYTC_FUNCTION_AMT 15 /* Function = 15, AMT mode */
> @@ -10163,11 +10165,14 @@ static struct ibm_struct proxsensor_driver_data = {
> #define DYTC_MODE_MMC_LOWPOWER 3 /* Low power mode */
> #define DYTC_MODE_MMC_BALANCE 0xF /* Default mode aka balanced */
> #define DYTC_MODE_MMC_DEFAULT 0 /* Default mode from MMC_GET, aka balanced */
> +#define DYTC_NOMODE 0xF /* When Function does not have a mode */
>
> #define DYTC_MODE_PSC_LOWPOWER 3 /* Low power mode */
> #define DYTC_MODE_PSC_BALANCE 5 /* Default mode aka balanced */
> #define DYTC_MODE_PSC_PERFORM 7 /* High power mode aka performance */
>
> +#define DYTC_UP_SUPPORT BIT(8) /* Ultra-performance (TMS) mode support */
> +
> #define DYTC_ERR_MASK 0xF /* Bits 0-3 in cmd result are the error result */
> #define DYTC_ERR_SUCCESS 1 /* CMD completed successful */
>
> @@ -10185,6 +10190,7 @@ static enum platform_profile_option dytc_current_profile;
> static atomic_t dytc_ignore_event = ATOMIC_INIT(0);
> static DEFINE_MUTEX(dytc_mutex);
> static int dytc_capabilities;
> +static bool dytc_ultraperf_cap;
> static bool dytc_mmc_get_available;
> static int profile_force;
>
> @@ -10355,6 +10361,17 @@ static int dytc_profile_set(struct platform_profile_handler *pprof,
> if (err)
> goto unlock;
>
> + /* Set TMS mode appropriately (enable for performance), if available */
> + if (dytc_ultraperf_cap) {
> + int cmd;
> +
> + cmd = DYTC_SET_COMMAND(DYTC_FUNCTION_TMS, DYTC_NOMODE,
> + profile == PLATFORM_PROFILE_PERFORMANCE);
> + err = dytc_command(cmd, &output);
> + if (err)
> + return err;
> + }
> +
> if (dytc_capabilities & BIT(DYTC_FC_MMC)) {
> if (profile == PLATFORM_PROFILE_BALANCED) {
> /*
> @@ -10429,6 +10446,7 @@ static struct platform_profile_handler dytc_profile = {
> static int tpacpi_dytc_profile_init(struct ibm_init_struct *iibm)
> {
> int err, output;
> + int cmd;
>
> /* Setup supported modes */
> set_bit(PLATFORM_PROFILE_LOW_POWER, dytc_profile.choices);
> @@ -10484,6 +10502,16 @@ static int tpacpi_dytc_profile_init(struct ibm_init_struct *iibm)
> dbg_printk(TPACPI_DBG_INIT, "No DYTC support available\n");
> return -ENODEV;
> }
> + err = dytc_command(DYTC_CMD_UP_CAP, &output);
Hmm, are you missing error handling here?
Other than that, this change looks fine now.
--
i.
> + dytc_ultraperf_cap = output & DYTC_UP_SUPPORT;
> + if (dytc_ultraperf_cap) {
> + pr_debug("TMS is supported\n");
> + /* Disable TMS by default - only use with performance mode */
> + cmd = DYTC_SET_COMMAND(DYTC_FUNCTION_TMS, DYTC_NOMODE, 0);
> + err = dytc_command(cmd, &output);
> + if (err)
> + return err;
> + }
>
> dbg_printk(TPACPI_DBG_INIT,
> "DYTC version %d: thermal mode available\n", dytc_version);
>
