[PATCH v3 5/9] hwmon: (dell-smm) Move config entries out of i8k_dmi_table

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Currently, i8k_dmi_table contains both entries used for DMI
matching and entries used to override config options. This
does not allow for differentiating between "its safe to issue
raw SMM calls on this machine" and "its not safe to issue raw
SMM calls on this machine, but here are some config values".

Since future SMM backends will need to differentiate between
those two cases, move those config entries into a separate
table. i8k_dmi_table now serves as a general "its safe to issue
raw SMM calls" table.

Tested-by: <serverror@xxxxxxxxxxxxx>
Signed-off-by: Armin Wolf <W_Armin@xxxxxx>
---
 drivers/hwmon/dell-smm-hwmon.c | 129 +++++++++++++++++++--------------
 1 file changed, 73 insertions(+), 56 deletions(-)

diff --git a/drivers/hwmon/dell-smm-hwmon.c b/drivers/hwmon/dell-smm-hwmon.c
index 3d14a3baf8e4..4a2c0d1ffa5b 100644
--- a/drivers/hwmon/dell-smm-hwmon.c
+++ b/drivers/hwmon/dell-smm-hwmon.c
@@ -1078,42 +1078,6 @@ static int __init dell_smm_init_hwmon(struct device *dev)
 	return PTR_ERR_OR_ZERO(dell_smm_hwmon_dev);
 }

-struct i8k_config_data {
-	uint fan_mult;
-	uint fan_max;
-};
-
-enum i8k_configs {
-	DELL_LATITUDE_D520,
-	DELL_PRECISION_490,
-	DELL_STUDIO,
-	DELL_XPS,
-};
-
-/*
- * Only use for machines which need some special configuration
- * in order to work correctly (e.g. if autoconfig fails on this machines).
- */
-
-static const struct i8k_config_data i8k_config_data[] __initconst = {
-	[DELL_LATITUDE_D520] = {
-		.fan_mult = 1,
-		.fan_max = I8K_FAN_TURBO,
-	},
-	[DELL_PRECISION_490] = {
-		.fan_mult = 1,
-		.fan_max = I8K_FAN_TURBO,
-	},
-	[DELL_STUDIO] = {
-		.fan_mult = 1,
-		.fan_max = I8K_FAN_HIGH,
-	},
-	[DELL_XPS] = {
-		.fan_mult = 1,
-		.fan_max = I8K_FAN_HIGH,
-	},
-};
-
 static const struct dmi_system_id i8k_dmi_table[] __initconst = {
 	{
 		.ident = "Dell G5 5590",
@@ -1143,14 +1107,6 @@ static const struct dmi_system_id i8k_dmi_table[] __initconst = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron"),
 		},
 	},
-	{
-		.ident = "Dell Latitude D520",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Latitude D520"),
-		},
-		.driver_data = (void *)&i8k_config_data[DELL_LATITUDE_D520],
-	},
 	{
 		.ident = "Dell Latitude 2",
 		.matches = {
@@ -1172,15 +1128,6 @@ static const struct dmi_system_id i8k_dmi_table[] __initconst = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "MP061"),
 		},
 	},
-	{
-		.ident = "Dell Precision 490",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME,
-				  "Precision WorkStation 490"),
-		},
-		.driver_data = (void *)&i8k_config_data[DELL_PRECISION_490],
-	},
 	{
 		.ident = "Dell Precision",
 		.matches = {
@@ -1201,7 +1148,6 @@ static const struct dmi_system_id i8k_dmi_table[] __initconst = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Studio"),
 		},
-		.driver_data = (void *)&i8k_config_data[DELL_STUDIO],
 	},
 	{
 		.ident = "Dell XPS M140",
@@ -1209,7 +1155,6 @@ static const struct dmi_system_id i8k_dmi_table[] __initconst = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
 			DMI_MATCH(DMI_PRODUCT_NAME, "MXC051"),
 		},
-		.driver_data = (void *)&i8k_config_data[DELL_XPS],
 	},
 	{
 		.ident = "Dell XPS",
@@ -1223,6 +1168,78 @@ static const struct dmi_system_id i8k_dmi_table[] __initconst = {

 MODULE_DEVICE_TABLE(dmi, i8k_dmi_table);

+/*
+ * Only use for machines which need some special configuration
+ * in order to work correctly (e.g. if autoconfig fails on this machines).
+ */
+struct i8k_config_data {
+	uint fan_mult;
+	uint fan_max;
+};
+
+enum i8k_configs {
+	DELL_LATITUDE_D520,
+	DELL_PRECISION_490,
+	DELL_STUDIO,
+	DELL_XPS,
+};
+
+static const struct i8k_config_data i8k_config_data[] __initconst = {
+	[DELL_LATITUDE_D520] = {
+		.fan_mult = 1,
+		.fan_max = I8K_FAN_TURBO,
+	},
+	[DELL_PRECISION_490] = {
+		.fan_mult = 1,
+		.fan_max = I8K_FAN_TURBO,
+	},
+	[DELL_STUDIO] = {
+		.fan_mult = 1,
+		.fan_max = I8K_FAN_HIGH,
+	},
+	[DELL_XPS] = {
+		.fan_mult = 1,
+		.fan_max = I8K_FAN_HIGH,
+	},
+};
+
+static const struct dmi_system_id i8k_config_dmi_table[] __initconst = {
+	{
+		.ident = "Dell Latitude D520",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Latitude D520"),
+		},
+		.driver_data = (void *)&i8k_config_data[DELL_LATITUDE_D520],
+	},
+	{
+		.ident = "Dell Precision 490",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME,
+				  "Precision WorkStation 490"),
+		},
+		.driver_data = (void *)&i8k_config_data[DELL_PRECISION_490],
+	},
+	{
+		.ident = "Dell Studio",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Studio"),
+		},
+		.driver_data = (void *)&i8k_config_data[DELL_STUDIO],
+	},
+	{
+		.ident = "Dell XPS M140",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MXC051"),
+		},
+		.driver_data = (void *)&i8k_config_data[DELL_XPS],
+	},
+	{ }
+};
+
 /*
  * On some machines once I8K_SMM_GET_FAN_TYPE is issued then CPU fan speed
  * randomly going up and down due to bug in Dell SMM or BIOS. Here is blacklist
@@ -1438,7 +1455,7 @@ static void __init dell_smm_init_dmi(void)
 	 * Set fan multiplier and maximal fan speed from DMI config.
 	 * Values specified in module parameters override values from DMI.
 	 */
-	id = dmi_first_match(i8k_dmi_table);
+	id = dmi_first_match(i8k_config_dmi_table);
 	if (id && id->driver_data) {
 		config = id->driver_data;
 		if (!fan_mult && config->fan_mult)
--
2.39.2




[Index of Archives]     [Linux Kernel Development]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux