The data in the max brightness port for iMacs with MMIO gmux incorrectly
reports 0x03ff, but it should be 0xffff. As all other MMIO gmux models
have 0xffff, hard code this for all MMIO gmux's so they all have the
proper brightness range accessible.
Reported-by: Karsten Leipold <poldi@xxxxxx>
Signed-off-by: Orlando Chamberlain <orlandoch.dev@xxxxxxxxx>
---
drivers/platform/x86/apple-gmux.c | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
diff --git a/drivers/platform/x86/apple-gmux.c b/drivers/platform/x86/apple-gmux.c
index cadbb557a108..1417e230edbd 100644
--- a/drivers/platform/x86/apple-gmux.c
+++ b/drivers/platform/x86/apple-gmux.c
@@ -105,6 +105,8 @@ struct apple_gmux_config {
#define GMUX_BRIGHTNESS_MASK 0x00ffffff
#define GMUX_MAX_BRIGHTNESS GMUX_BRIGHTNESS_MASK
+# define MMIO_GMUX_MAX_BRIGHTNESS 0xffff
+
static u8 gmux_pio_read8(struct apple_gmux_data *gmux_data, int port)
{
return inb(gmux_data->iostart + port);
@@ -857,7 +859,17 @@ static int gmux_probe(struct pnp_dev *pnp, const struct pnp_device_id *id)
memset(&props, 0, sizeof(props));
props.type = BACKLIGHT_PLATFORM;
- props.max_brightness = gmux_read32(gmux_data, GMUX_PORT_MAX_BRIGHTNESS);
+
+ /*
+ * All MMIO gmux's have 0xffff as max brightness, but some iMacs incorrectly
+ * report 0x03ff, despite the firmware being happy to set 0xffff as the brightness
+ * at boot. Force 0xffff for all MMIO gmux's so they all have the correct brightness
+ * range.
+ */
+ if (type == APPLE_GMUX_TYPE_MMIO)
+ props.max_brightness = MMIO_GMUX_MAX_BRIGHTNESS;
+ else
+ props.max_brightness = gmux_read32(gmux_data, GMUX_PORT_MAX_BRIGHTNESS);
#if IS_REACHABLE(CONFIG_ACPI_VIDEO)
register_bdev = acpi_video_get_backlight_type() == acpi_backlight_apple_gmux;
--
2.42.0
