Re: [PATCH v12 9/9] drm/amd/pm: enable Wifi RFI mitigation feature support for SMU13.0.7

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 17 Oct 2023, Ma Jun wrote:

> From: Evan Quan <quanliangl@xxxxxxxxxxx>
> 
> Fulfill the SMU13.0.7 support for Wifi RFI mitigation feature.
> 
> Signed-off-by: Evan Quan <quanliangl@xxxxxxxxxxx>
> Reviewed-by: Mario Limonciello <mario.limonciello@xxxxxxx>
> Signed-off-by: Ma Jun <Jun.Ma2@xxxxxxx>
> --
> v10->v11:
>   - downgrade the prompt level on message failure(Lijo)
> ---
>  .../drm/amd/pm/swsmu/smu13/smu_v13_0_7_ppt.c  | 59 +++++++++++++++++++
>  1 file changed, 59 insertions(+)
> 
> diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_7_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_7_ppt.c
> index 62f2886ab4df..c5736fb3cf6d 100644
> --- a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_7_ppt.c
> +++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_7_ppt.c
> @@ -126,6 +126,7 @@ static struct cmn2asic_msg_mapping smu_v13_0_7_message_map[SMU_MSG_MAX_COUNT] =
>  	MSG_MAP(AllowGpo,			PPSMC_MSG_SetGpoAllow,           0),
>  	MSG_MAP(GetPptLimit,			PPSMC_MSG_GetPptLimit,                 0),
>  	MSG_MAP(NotifyPowerSource,		PPSMC_MSG_NotifyPowerSource,           0),
> +	MSG_MAP(EnableUCLKShadow,		PPSMC_MSG_EnableUCLKShadow,            0),
>  };
>  
>  static struct cmn2asic_mapping smu_v13_0_7_clk_map[SMU_CLK_COUNT] = {
> @@ -207,6 +208,7 @@ static struct cmn2asic_mapping smu_v13_0_7_table_map[SMU_TABLE_COUNT] = {
>  	TAB_MAP(ACTIVITY_MONITOR_COEFF),
>  	[SMU_TABLE_COMBO_PPTABLE] = {1, TABLE_COMBO_PPTABLE},
>  	TAB_MAP(OVERDRIVE),
> +	TAB_MAP(WIFIBAND),
>  };
>  
>  static struct cmn2asic_mapping smu_v13_0_7_pwr_src_map[SMU_POWER_SOURCE_COUNT] = {
> @@ -503,6 +505,9 @@ static int smu_v13_0_7_tables_init(struct smu_context *smu)
>  	               AMDGPU_GEM_DOMAIN_VRAM);
>  	SMU_TABLE_INIT(tables, SMU_TABLE_COMBO_PPTABLE, MP0_MP1_DATA_REGION_SIZE_COMBOPPTABLE,
>  			PAGE_SIZE, AMDGPU_GEM_DOMAIN_VRAM);
> +	SMU_TABLE_INIT(tables, SMU_TABLE_WIFIBAND,
> +		       sizeof(WifiBandEntryTable_t), PAGE_SIZE,
> +		       AMDGPU_GEM_DOMAIN_VRAM);
>  
>  	smu_table->metrics_table = kzalloc(sizeof(SmuMetricsExternal_t), GFP_KERNEL);
>  	if (!smu_table->metrics_table)
> @@ -2179,6 +2184,57 @@ static int smu_v13_0_7_set_df_cstate(struct smu_context *smu,
>  					       NULL);
>  }
>  
> +static bool smu_v13_0_7_wbrf_support_check(struct smu_context *smu)
> +{
> +	return smu->smc_fw_version > 0x00524600;
> +}
> +
> +static int smu_v13_0_7_set_wbrf_exclusion_ranges(struct smu_context *smu,
> +						 struct freq_band_range *exclusion_ranges)
> +{
> +	WifiBandEntryTable_t wifi_bands;
> +	int valid_entries = 0;
> +	int ret, i;
> +
> +	memset(&wifi_bands, 0, sizeof(wifi_bands));
> +	for (i = 0; i < ARRAY_SIZE(wifi_bands.WifiBandEntry); i++) {
> +		if (!exclusion_ranges[i].start &&
> +		    !exclusion_ranges[i].end)

After having seen this construct nth time, I think you should have a 
static inline function for this check with a proper name.

> +			break;
> +
> +		/* PMFW expects the inputs to be in Mhz unit */
> +		wifi_bands.WifiBandEntry[valid_entries].LowFreq =
> +			DIV_ROUND_DOWN_ULL(exclusion_ranges[i].start, HZ_IN_MHZ);
> +		wifi_bands.WifiBandEntry[valid_entries++].HighFreq =
> +			DIV_ROUND_UP_ULL(exclusion_ranges[i].end, HZ_IN_MHZ);
> +	}
> +	wifi_bands.WifiBandEntryNum = valid_entries;
> +
> +	/*
> +	 * Per confirm with PMFW team, WifiBandEntryNum = 0 is a valid setting.
> +	 * Considering the scenarios below:
> +	 * - At first the wifi device adds an exclusion range e.g. (2400,2500) to
> +	 *   BIOS and our driver gets notified. We will set WifiBandEntryNum = 1
> +	 *   and pass the WifiBandEntry (2400, 2500) to PMFW.
> +	 *
> +	 * - Later the wifi device removes the wifiband list added above and
> +	 *   our driver gets notified again. At this time, driver will set
> +	 *   WifiBandEntryNum = 0 and pass an empty WifiBandEntry list to PMFW.
> +	 *   - PMFW may still need to do some uclk shadow update(e.g. switching
> +	 *     from shadow clock back to primary clock) on receiving this.
> +	 */
> +
> +	ret = smu_cmn_update_table(smu,
> +				   SMU_TABLE_WIFIBAND,
> +				   0,
> +				   (void *)(&wifi_bands),
> +				   true);
> +	if (ret)
> +		dev_warn(smu->adev->dev, "Failed to set wifiband!");
> +
> +	return ret;
> +}

Is this whole function duplicate of the one in the other file? Don't 
duplicate code like this but create reusable functions properly.

-- 
 i.

> +
>  static const struct pptable_funcs smu_v13_0_7_ppt_funcs = {
>  	.get_allowed_feature_mask = smu_v13_0_7_get_allowed_feature_mask,
>  	.set_default_dpm_table = smu_v13_0_7_set_default_dpm_table,
> @@ -2247,6 +2303,9 @@ static const struct pptable_funcs smu_v13_0_7_ppt_funcs = {
>  	.set_mp1_state = smu_v13_0_7_set_mp1_state,
>  	.set_df_cstate = smu_v13_0_7_set_df_cstate,
>  	.gpo_control = smu_v13_0_gpo_control,
> +	.is_asic_wbrf_supported = smu_v13_0_7_wbrf_support_check,
> +	.enable_uclk_shadow = smu_v13_0_enable_uclk_shadow,
> +	.set_wbrf_exclusion_ranges = smu_v13_0_7_set_wbrf_exclusion_ranges,
>  };
>  
>  void smu_v13_0_7_set_ppt_funcs(struct smu_context *smu)
> 




[Index of Archives]     [Linux Kernel Development]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux