This fix involves 2 changes: - All event regs have a reset value of 0, which is not a valid event_number as per the event_list for most blocks and hence seen as an error. Add a "disable" event with event_number 0 for all blocks. - The enable bit for each counter need not be checked before reading the event info, and hence removed. Fixes: 1a218d312e65 ("platform/mellanox: mlxbf-pmc: Add Mellanox BlueField PMC driver") Signed-off-by: Shravan Kumar Ramani <shravankr@xxxxxxxxxx> Reviewed-by: Vadim Pasternak <vadimp@xxxxxxxxxx> Reviewed-by: David Thompson <davthompson@xxxxxxxxxx> --- drivers/platform/mellanox/mlxbf-pmc.c | 27 +++++++-------------------- 1 file changed, 7 insertions(+), 20 deletions(-) diff --git a/drivers/platform/mellanox/mlxbf-pmc.c b/drivers/platform/mellanox/mlxbf-pmc.c index 95afcae7b9fa..2d4bbe99959e 100644 --- a/drivers/platform/mellanox/mlxbf-pmc.c +++ b/drivers/platform/mellanox/mlxbf-pmc.c @@ -191,6 +191,7 @@ static const struct mlxbf_pmc_events mlxbf_pmc_smgen_events[] = { }; static const struct mlxbf_pmc_events mlxbf_pmc_trio_events_1[] = { + { 0x0, "DISABLE" }, { 0xa0, "TPIO_DATA_BEAT" }, { 0xa1, "TDMA_DATA_BEAT" }, { 0xa2, "MAP_DATA_BEAT" }, @@ -214,6 +215,7 @@ static const struct mlxbf_pmc_events mlxbf_pmc_trio_events_1[] = { }; static const struct mlxbf_pmc_events mlxbf_pmc_trio_events_2[] = { + { 0x0, "DISABLE" }, { 0xa0, "TPIO_DATA_BEAT" }, { 0xa1, "TDMA_DATA_BEAT" }, { 0xa2, "MAP_DATA_BEAT" }, @@ -246,6 +248,7 @@ static const struct mlxbf_pmc_events mlxbf_pmc_trio_events_2[] = { }; static const struct mlxbf_pmc_events mlxbf_pmc_ecc_events[] = { + { 0x0, "DISABLE" }, { 0x100, "ECC_SINGLE_ERROR_CNT" }, { 0x104, "ECC_DOUBLE_ERROR_CNT" }, { 0x114, "SERR_INJ" }, @@ -258,6 +261,7 @@ static const struct mlxbf_pmc_events mlxbf_pmc_ecc_events[] = { }; static const struct mlxbf_pmc_events mlxbf_pmc_mss_events[] = { + { 0x0, "DISABLE" }, { 0xc0, "RXREQ_MSS" }, { 0xc1, "RXDAT_MSS" }, { 0xc2, "TXRSP_MSS" }, @@ -265,6 +269,7 @@ static const struct mlxbf_pmc_events mlxbf_pmc_mss_events[] = { }; static const struct mlxbf_pmc_events mlxbf_pmc_hnf_events[] = { + { 0x0, "DISABLE" }, { 0x45, "HNF_REQUESTS" }, { 0x46, "HNF_REJECTS" }, { 0x47, "ALL_BUSY" }, @@ -323,6 +328,7 @@ static const struct mlxbf_pmc_events mlxbf_pmc_hnf_events[] = { }; static const struct mlxbf_pmc_events mlxbf_pmc_hnfnet_events[] = { + { 0x0, "DISABLE" }, { 0x12, "CDN_REQ" }, { 0x13, "DDN_REQ" }, { 0x14, "NDN_REQ" }, @@ -892,7 +898,7 @@ static int mlxbf_pmc_read_event(int blk_num, uint32_t cnt_num, bool is_l3, uint64_t *result) { uint32_t perfcfg_offset, perfval_offset; - uint64_t perfmon_cfg, perfevt, perfctl; + uint64_t perfmon_cfg, perfevt; if (cnt_num >= pmc->block[blk_num].counters) return -EINVAL; @@ -904,25 +910,6 @@ static int mlxbf_pmc_read_event(int blk_num, uint32_t cnt_num, bool is_l3, perfval_offset = perfcfg_offset + pmc->block[blk_num].counters * MLXBF_PMC_REG_SIZE; - /* Set counter in "read" mode */ - perfmon_cfg = FIELD_PREP(MLXBF_PMC_PERFMON_CONFIG_ADDR, - MLXBF_PMC_PERFCTL); - perfmon_cfg |= FIELD_PREP(MLXBF_PMC_PERFMON_CONFIG_STROBE, 1); - perfmon_cfg |= FIELD_PREP(MLXBF_PMC_PERFMON_CONFIG_WR_R_B, 0); - - if (mlxbf_pmc_write(pmc->block[blk_num].mmio_base + perfcfg_offset, - MLXBF_PMC_WRITE_REG_64, perfmon_cfg)) - return -EFAULT; - - /* Check if the counter is enabled */ - - if (mlxbf_pmc_read(pmc->block[blk_num].mmio_base + perfval_offset, - MLXBF_PMC_READ_REG_64, &perfctl)) - return -EFAULT; - - if (!FIELD_GET(MLXBF_PMC_PERFCTL_EN0, perfctl)) - return -EINVAL; - /* Set counter in "read" mode */ perfmon_cfg = FIELD_PREP(MLXBF_PMC_PERFMON_CONFIG_ADDR, MLXBF_PMC_PERFEVT); -- 2.30.1