On Tue, 22 Aug 2023, Vadim Pasternak wrote: > Add documentation for the new attributes: > - CPLD versioning: "cpld5_pn", "cpld5_version", "cpld5_version_min". > - JTAG capability: "jtag_cap", indicating the available method of > CPLD/FPGA devices field update. > - System lid status: "lid_open". > - Reset caused by long press of power button: "reset_long_pwr_pb". > - Reset caused by switch board DC-DC converter device failure: > "reset_swb_dc_dc_pwr_fail". > > Signed-off-by: Vadim Pasternak <vadimp@xxxxxxxxxx> > Reviewed-by: Michael Shych <michaelsh@xxxxxxxxxx> > Reviewed-by: Hans de Goede <hdegoede@xxxxxxxxxx> > --- > Comments provided by Hans: > v2->v3: > - Document new attribute "reset_swb_dc_dc_pwr_fail". > --- > .../ABI/stable/sysfs-driver-mlxreg-io | 52 +++++++++++++++++++ > 1 file changed, 52 insertions(+) > > diff --git a/Documentation/ABI/stable/sysfs-driver-mlxreg-io b/Documentation/ABI/stable/sysfs-driver-mlxreg-io > index 60953903d007..7022c623075b 100644 > --- a/Documentation/ABI/stable/sysfs-driver-mlxreg-io > +++ b/Documentation/ABI/stable/sysfs-driver-mlxreg-io > @@ -662,3 +662,55 @@ Description: This file shows the system reset cause due to AC power failure. > Value 1 in file means this is reset cause, 0 - otherwise. > > The file is read only. > + > +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld5_pn > +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld5_version > +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld5_version_min > +Date: August 2023 > +KernelVersion: 6.6 > +Contact: Vadim Pasternak <vadimp@xxxxxxxxxx> > +Description: These files show with which CPLD part numbers, version and minor > + versions have been burned the 5-th CPLD device equipped on a > + system. > + > + The files are read only. > + > +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/jtag_cap > +Date: August 2023 > +KernelVersion: 6.6 > +Contact: Vadim Pasternak <vadimp@xxxxxxxxxx> > +Description: This file indicates the available method of CPLD/FPGA devices > + field update through the JTAG chain: > + b00 - field update through LPC bus register memory space. > + b01 - Reserved. > + b10 - Reserved. > + b11 - field update through CPU GPIOs bit-banging. > + > + The file is read only. > + > +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lid_open > +Date: August 2023 > +KernelVersion: 6.6 > +Contact: Vadim Pasternak <vadimp@xxxxxxxxxx> > +Description: 1 - indicates that system lid is opened, otherwise 0. > + > + The file is read only. > + > +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_long_pwr_pb > +Date: August 2023 > +KernelVersion: 6.6 > +Contact: Vadim Pasternak <vadimp@xxxxxxxxxx> > +Description: This file if set 1 indicates that system has been reset by > + long press of power button. > + > + The file is read only. > + > +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_swb_dc_dc_pwr_fail > +Date: August 2023 > +KernelVersion: 6.6 > +Contact: Vadim Pasternak <vadimp@xxxxxxxxxx> > +Description: This file shows the system reset cause due to the failure of > + DC-DC power converter devices, equipped on the switch board. > + Value 1 in file means this is reset cause, 0 - otherwise. What "this" on the last line refers to. I'm unable to figure it out from the text. In general, the meaning here is quite unclear. I think the "cause due to" put together is the main source of confusion (it's like saying "cause cause" or "due to due to"). Do you mean the cause for the system reset is the failure of the DC-DC power converter devices if this file shows 1? For the other patches 1-15: Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx> One additional thing you want to address is the missing '\n' chars from the dev_*() prints but it can be handled after these patches. > + > + The file is read only. > -- i.
