Recent PMFW have the capability that can force flush the FIFO
contents to DRAM on sending a command id via the mailbox. Add this support
to the driver.
Co-developed-by: Sanket Goswami <Sanket.Goswami@xxxxxxx>
Signed-off-by: Sanket Goswami <Sanket.Goswami@xxxxxxx>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
---
drivers/platform/x86/amd/pmc/pmc.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/platform/x86/amd/pmc/pmc.c b/drivers/platform/x86/amd/pmc/pmc.c
index 043451fabbbe..45f7d21276bb 100644
--- a/drivers/platform/x86/amd/pmc/pmc.c
+++ b/drivers/platform/x86/amd/pmc/pmc.c
@@ -55,6 +55,9 @@
#define S2D_TELEMETRY_BYTES_MAX 0x100000
#define S2D_TELEMETRY_DRAMBYTES_MAX 0x1000000
+/* STB Spill to DRAM Message Definition */
+#define STB_FORCE_FLUSH_DATA 0xCF
+
/* Base address of SMU for mapping physical address to virtual address */
#define AMD_PMC_MAPPING_SIZE 0x01000
#define AMD_PMC_BASE_ADDR_OFFSET 0x10000
@@ -236,7 +239,7 @@ static const struct file_operations amd_pmc_stb_debugfs_fops = {
static int amd_pmc_stb_debugfs_open_v2(struct inode *inode, struct file *filp)
{
struct amd_pmc_dev *dev = filp->f_inode->i_private;
- u32 *buf, fsize, num_samples, stb_rdptr_offset = 0;
+ u32 *buf, fsize, num_samples, val, stb_rdptr_offset = 0;
int ret;
/* Write dummy postcode while reading the STB buffer */
@@ -251,6 +254,10 @@ static int amd_pmc_stb_debugfs_open_v2(struct inode *inode, struct file *filp)
/* Spill to DRAM num_samples uses separate SMU message port */
dev->msg_port = 1;
+ ret = amd_pmc_send_cmd(dev, 0, &val, STB_FORCE_FLUSH_DATA, 1);
+ if (ret)
+ dev_warn_once(dev->dev, "S2D force flush not supported\n");
+
/* Get the num_samples to calculate the last push location */
ret = amd_pmc_send_cmd(dev, S2D_NUM_SAMPLES, &num_samples, dev->s2d_msg_id, true);
/* Clear msg_port for other SMU operation */
--
2.25.1
