Re: [PATCH v4 1/1] platform/x86: asus-wmi: add support for ASUS screenpad

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On 7/7/23 00:23, Luke Jones wrote:
> On Tue, 2023-07-04 at 13:16 +0200, Hans de Goede wrote:
>> Hi Luke,
>>
>> On 6/30/23 06:17, Luke D. Jones wrote:
>>> Add support for the WMI methods used to turn off and adjust the
>>> brightness of the secondary "screenpad" device found on some high-
>>> end
>>> ASUS laptops like the GX650P series and others.
>>>
>>> These methods are utilised in a new backlight device named
>>> asus_screenpad.
>>>
>>> Signed-off-by: Luke D. Jones <luke@xxxxxxxxxx>
>>
>> Thank you for your work on this. I have one small change request
>> and then v5 should be ready for merging, see me inline comment
>> below.
>>
>>> ---
>>>  drivers/platform/x86/asus-wmi.c            | 128
>>> +++++++++++++++++++++
>>>  drivers/platform/x86/asus-wmi.h            |   1 +
>>>  include/linux/platform_data/x86/asus-wmi.h |   4 +
>>>  3 files changed, 133 insertions(+)
>>>
>>> diff --git a/drivers/platform/x86/asus-wmi.c
>>> b/drivers/platform/x86/asus-wmi.c
>>> index 62cee13f5576..967c92ceb041 100644
>>> --- a/drivers/platform/x86/asus-wmi.c
>>> +++ b/drivers/platform/x86/asus-wmi.c
>>> @@ -25,6 +25,7 @@
>>>  #include <linux/input/sparse-keymap.h>
>>>  #include <linux/kernel.h>
>>>  #include <linux/leds.h>
>>> +#include <linux/minmax.h>
>>>  #include <linux/module.h>
>>>  #include <linux/pci.h>
>>>  #include <linux/pci_hotplug.h>
>>> @@ -212,6 +213,7 @@ struct asus_wmi {
>>>  
>>>         struct input_dev *inputdev;
>>>         struct backlight_device *backlight_device;
>>> +       struct backlight_device *screenpad_backlight_device;
>>>         struct platform_device *platform_device;
>>>  
>>>         struct led_classdev wlan_led;
>>> @@ -3839,6 +3841,123 @@ static int is_display_toggle(int code)
>>>         return 0;
>>>  }
>>>  
>>> +/* Screenpad backlight
>>> *******************************************************/
>>> +
>>> +static int read_screenpad_backlight_power(struct asus_wmi *asus)
>>> +{
>>> +       int ret;
>>> +
>>> +       ret = asus_wmi_get_devstate_simple(asus,
>>> ASUS_WMI_DEVID_SCREENPAD_POWER);
>>> +       if (ret < 0)
>>> +               return ret;
>>> +       /* 1 == powered */
>>> +       return ret ? FB_BLANK_UNBLANK : FB_BLANK_POWERDOWN;
>>> +}
>>> +
>>> +static int read_screenpad_brightness(struct backlight_device *bd)
>>> +{
>>> +       struct asus_wmi *asus = bl_get_data(bd);
>>> +       u32 retval;
>>> +       int err;
>>> +
>>> +       err = read_screenpad_backlight_power(asus);
>>> +       if (err < 0)
>>> +               return err;
>>> +       /* The device brightness can only be read if powered, so
>>> return stored */
>>> +       if (err == FB_BLANK_POWERDOWN)
>>> +               return asus->driver->screenpad_brightness;
>>> +
>>> +       err = asus_wmi_get_devstate(asus,
>>> ASUS_WMI_DEVID_SCREENPAD_LIGHT, &retval);
>>> +       if (err < 0)
>>> +               return err;
>>> +
>>> +       return retval & ASUS_WMI_DSTS_BRIGHTNESS_MASK;
>>> +}
>>> +
>>> +static int update_screenpad_bl_status(struct backlight_device *bd)
>>> +{
>>> +       struct asus_wmi *asus = bl_get_data(bd);
>>> +       int power, err = 0;
>>> +       u32 ctrl_param;
>>> +
>>> +       power = read_screenpad_backlight_power(asus);
>>> +       if (power < 0)
>>> +               return power;
>>> +
>>> +       if (bd->props.power != power) {
>>> +               if (power != FB_BLANK_UNBLANK) {
>>> +                       /* Only brightness > 0 can power it back on
>>> */
>>> +                       ctrl_param = max(1, asus->driver-
>>>> screenpad_brightness);
>>> +                       err =
>>> asus_wmi_set_devstate(ASUS_WMI_DEVID_SCREENPAD_LIGHT,
>>> +                                                   ctrl_param,
>>> NULL);
>>> +               } else {
>>> +                       err =
>>> asus_wmi_set_devstate(ASUS_WMI_DEVID_SCREENPAD_POWER, 0, NULL);
>>> +               }
>>> +       } else if (power == FB_BLANK_UNBLANK) {
>>> +               /* Only set brightness if powered on or we get
>>> invalid/unsync state */
>>> +               ctrl_param = bd->props.brightness;
>>> +               err =
>>> asus_wmi_set_devstate(ASUS_WMI_DEVID_SCREENPAD_LIGHT, ctrl_param,
>>> NULL);
>>> +       }
>>> +
>>> +       /* Ensure brightness is stored to turn back on with */
>>> +       asus->driver->screenpad_brightness = bd->props.brightness;
>>> +
>>> +       return err;
>>> +}
>>> +
>>> +static const struct backlight_ops asus_screenpad_bl_ops = {
>>> +       .get_brightness = read_screenpad_brightness,
>>> +       .update_status = update_screenpad_bl_status,
>>> +       .options = BL_CORE_SUSPENDRESUME,
>>> +};
>>> +
>>> +static int asus_screenpad_init(struct asus_wmi *asus)
>>> +{
>>> +       struct backlight_device *bd;
>>> +       struct backlight_properties props;
>>> +       int err, power;
>>> +       int brightness = 0;
>>> +
>>> +       power = read_screenpad_backlight_power(asus);
>>> +       if (power < 0)
>>> +               return power;
>>> +
>>> +       if (power != FB_BLANK_POWERDOWN) {
>>> +               err = asus_wmi_get_devstate(asus,
>>> ASUS_WMI_DEVID_SCREENPAD_LIGHT, &brightness);
>>> +               if (err < 0)
>>> +                       return err;
>>> +       }
>>> +       /* default to an acceptable min brightness on boot if too
>>> low */
>>> +       if (brightness < 60)
>>> +               brightness = 60;
>>
>> If settings below 60 are no good, then the correct way to handle
>> this is to limit the range to 0 - (255-60) and add / substract
>> 60 when setting / getting the brightness.
>>
>> E.g. do something like this:
>>
>> #define SCREENPAD_MIN_BRIGHTNESS        60
>> #define SCREENPAD_MAX_BRIGHTNESS        255
>>
>>         props.max_brightness = SCREENPAD_MAX_BRIGHTNESS -
>> SCREENPAD_MIN_BRIGHTNESS;
>>
>> And in update_screenpad_bl_status() do:
>>
>>         ctrl_param = bd->props.brightness + SCREENPAD_MIN_BRIGHTNESS;
>>
>> And when reading the brightness substract SCREENPAD_MIN_BRIGHTNESS,
>> clamping to a minimum value of 0.
>>
>> This avoids a dead-zone in the brightness range between 0-60 .
> 
> Hi Hans, I think this is the wrong thing to do.
> 
> The initial point of that first `brightness = 60;` is only to set it to
> an acceptable brightness on boot. We don't want to prevent the user
> from going below that brightness at all - this is just to ensure the
> screen is visible on boot if the brightness was under that value, and
> it is usually only under that value if it was set to off before
> shutdown/reboot.
> 
> It's not to try and put the range between 60-255, it's just to make the
> screen visible on boot if it was off previously. The folks who have
> tested this have found that this is the desired behaviour they expect.

I see.

So if I understand things correctly then 60 is a good default,
but the screen can go darker and still be usable.

But 1 leads to an unusable screen, so we still need
a SCREENPAD_MIN_BRIGHTNESS to avoid the screen being able
to go so dark that it is no longer usable and then still
move the range a bit, but just not by 60, but by some
other number (something in the 10-30 range I guess?)

Combined with adding a:

#define SCREENPAD_DEFAULT_BRIGHTNESS        60

And at boot when the read back brightness <
SCREENPAD_MIN_BRIGHTNESS set it to SCREENPAD_DEFAULT_BRIGHTNESS.

We really want to avoid users to be able to set an unusable
low brightness level. As mentioned in the new panel brightness
API proposal:

https://lore.kernel.org/dri-devel/b61d3eeb-6213-afac-2e70-7b9791c86d2e@xxxxxxxxxx/

"3. The meaning of 0 is not clearly defined, it can be either off,
   or minimum brightness at which the display is still readable
  (in a low light environment)"

and the plan going forward is to:

"Unlike the /sys/class/backlight/foo/brightness this brightness property
has a clear definition for the value 0. The kernel must ensure that 0
means minimum brightness (so 0 should _never_ turn the backlight off).
If necessary the kernel must enforce a minimum value by adding
an offset to the value seen in the property to ensure this behavior."

So I really want to see this new backlight driver implement the
new planned behavior for 0 from the start, with 0 meaning minimum
*usable* brightness.

Regards,

Hans






[Index of Archives]     [Linux Kernel Development]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux