RE: [PATCH v2] mlxbf-bootctl: Add sysfs file for BlueField boot log

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




> -----Original Message-----
> From: David Thompson <davthompson@xxxxxxxxxx>
> Sent: Wednesday, May 10, 2023 7:03 PM
> To: Liming Sun <limings@xxxxxxxxxx>; Vadim Pasternak
> <vadimp@xxxxxxxxxx>; Hans de Goede <hdegoede@xxxxxxxxxx>; Mark Gross
> <markgross@xxxxxxxxxx>
> Cc: platform-driver-x86@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx
> Subject: RE: [PATCH v2] mlxbf-bootctl: Add sysfs file for BlueField boot log
> 
> 
> 
> > -----Original Message-----
> > From: Liming Sun <limings@xxxxxxxxxx>
> > Sent: Wednesday, May 10, 2023 7:55 AM
> > To: Vadim Pasternak <vadimp@xxxxxxxxxx>; David Thompson
> > <davthompson@xxxxxxxxxx>; Hans de Goede <hdegoede@xxxxxxxxxx>;
> Mark
> > Gross <markgross@xxxxxxxxxx>
> > Cc: Liming Sun <limings@xxxxxxxxxx>; platform-driver-x86@xxxxxxxxxxxxxxx;
> > linux-kernel@xxxxxxxxxxxxxxx
> > Subject: [PATCH v2] mlxbf-bootctl: Add sysfs file for BlueField boot log
> >
> > This commit adds sysfs interface to be used to write into the boot log which
> is 1KB
> > HW buffer on BlueField SoC. The same log buffer is also used by firmware
> code
> > like ATF/UEFI, and can be displayed by userspace tools or from external host
> via
> > USB/PCIe.
> >
> > Signed-off-by: Liming Sun <limings@xxxxxxxxxx>
> > Reviewed-by: Vadim Pasternak <vadimp@xxxxxxxxxx>
> > ---
> > v1->v2:
> >     Fixes for comments from Hans:
> >     - Add more details in Documentation about the log levels;
> >     - Replace 0x0a with '\n';
> >     - Solve comment 'Why len + 1, this seems intended to assume some
> >       separator between prefix'. The change is to remove the '+ 1'
> >       here to avoid confusion. Yes, it's trying to remove the space
> >       separator. Since the next block 'Ignore leading spaces' already
> >       has similar logic, no need for the '+ 1" here.
> > v1: Initial version.
> > ---
> >  .../testing/sysfs-platform-mellanox-bootctl   |   9 ++
> >  drivers/platform/mellanox/mlxbf-bootctl.c     | 141 ++++++++++++++++++
> >  2 files changed, 150 insertions(+)
> >
> > diff --git a/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl
> > b/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl
> > index 9b99a81babb1..4c5c02d8f870 100644
> > --- a/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl
> > +++ b/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl
> > @@ -75,3 +75,12 @@ KernelVersion:	6.4
> >  Contact:	"Liming Sun <limings@xxxxxxxxxx>"
> >  Description:
> >  		The file used to access the BlueField boot fifo.
> > +
> > +What:		/sys/bus/platform/devices/MLNXBF04:00/rsh_log
> > +Date:		May 2023
> > +KernelVersion:	6.4
> > +Contact:	"Liming Sun <limings@xxxxxxxxxx>"
> > +Description:
> > +		The file used to write BlueField boot log with the format
> > +                "[INFO|WARN|ERR|ASSERT ]<msg>". Log level 'INFO' is used by
> > +                default if not specified.
> > diff --git a/drivers/platform/mellanox/mlxbf-bootctl.c
> > b/drivers/platform/mellanox/mlxbf-bootctl.c
> > index 1bad1d278672..e88ce68acb89 100644
> > --- a/drivers/platform/mellanox/mlxbf-bootctl.c
> > +++ b/drivers/platform/mellanox/mlxbf-bootctl.c
> > @@ -45,10 +45,38 @@ static const char * const
> mlxbf_bootctl_lifecycle_states[]
> > = {
> >  	[3] = "RMA",
> >  };
> >
> > +/* Log header format. */
> > +#define MLXBF_RSH_LOG_TYPE_SHIFT	56
> > +#define MLXBF_RSH_LOG_LEN_SHIFT		48
> > +#define MLXBF_RSH_LOG_LEVEL_SHIFT	0
> > +
> > +/* Log module ID and type (only MSG type in Linux driver for now). */
> > +#define MLXBF_RSH_LOG_TYPE_MSG		0x04ULL
> > +
> > +/* Log ctl/data register offset. */
> > +#define MLXBF_RSH_SCRATCH_BUF_CTL_OFF	0
> > +#define MLXBF_RSH_SCRATCH_BUF_DATA_OFF	0x10
> > +
> > +/* Log message levels. */
> > +enum {
> > +	MLXBF_RSH_LOG_INFO,
> > +	MLXBF_RSH_LOG_WARN,
> > +	MLXBF_RSH_LOG_ERR
> > +};
> > +
> 
> Should add "MLXBF_RSH_LOG_ASSERT" to enum for completeness

Updated in v3.

> 
> >  /* Mapped pointer for RSH_BOOT_FIFO_DATA and RSH_BOOT_FIFO_COUNT
> > register. */  static void __iomem *mlxbf_rsh_boot_data;  static void
> __iomem
> > *mlxbf_rsh_boot_cnt;
> >
> > +/* Mapped pointer for rsh log semaphore/ctrl/data register. */ static
> > +void __iomem *mlxbf_rsh_semaphore; static void __iomem
> > +*mlxbf_rsh_scratch_buf_ctl; static void __iomem
> > +*mlxbf_rsh_scratch_buf_data;
> > +
> > +/* Rsh log levels. */
> > +static const char * const mlxbf_rsh_log_level[] = {
> > +	"INFO", "WARN", "ERR", "ASSERT"};
> > +
> >  /* ARM SMC call which is atomic and no need for lock. */  static int
> > mlxbf_bootctl_smc(unsigned int smc_op, int smc_arg)  { @@ -266,12
> +294,111
> > @@ static ssize_t fw_reset_store(struct device *dev,
> >  	return count;
> >  }
> >
> > +/* Size(8-byte words) of the log buffer. */
> > +#define RSH_SCRATCH_BUF_CTL_IDX_MASK	0x7f
> > +
> > +static int mlxbf_rsh_log_sem_lock(void) {
> > +	unsigned long timeout;
> > +
> > +	/* Take the semaphore. */
> > +	timeout = jiffies + msecs_to_jiffies(100);
> > +	while (readq(mlxbf_rsh_semaphore)) {
> > +		if (time_after(jiffies, timeout))
> > +			return -ETIMEDOUT;
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +static void mlxbf_rsh_log_sem_unlock(void) {
> > +	writeq(0, mlxbf_rsh_semaphore);
> > +}
> > +
> > +static ssize_t rsh_log_store(struct device *dev,
> > +			     struct device_attribute *attr,
> > +			     const char *buf, size_t count)
> > +{
> > +	int rc, idx, num, len, size = (int)count, level = MLXBF_RSH_LOG_INFO;
> > +	u64 data;
> > +
> > +	if (!size)
> > +		return -EINVAL;
> > +
> > +	if (!mlxbf_rsh_semaphore || !mlxbf_rsh_scratch_buf_ctl)
> > +		return -EOPNOTSUPP;
> > +
> > +	/* Ignore line break at the end. */
> > +	if (buf[size - 1] == '\n')
> > +		size--;
> > +
> > +	/* Check the message prefix. */
> > +	for (idx = 0; idx < ARRAY_SIZE(mlxbf_rsh_log_level); idx++) {
> > +		len = strlen(mlxbf_rsh_log_level[idx]);
> > +		if (len + 1 < size &&
> > +		    !strncmp(buf, mlxbf_rsh_log_level[idx], len)) {
> > +			buf += len;
> > +			size -= len;
> > +			level = idx;
> > +			break;
> > +		}
> > +	}
> > +
> > +	/* Ignore leading spaces. */
> > +	while (size > 0 && buf[0] == ' ') {
> > +		size--;
> > +		buf++;
> > +	}
> > +
> > +	/* Take the semaphore. */
> > +	rc = mlxbf_rsh_log_sem_lock();
> > +	if (rc)
> > +		return rc;
> > +
> > +	/* Calculate how many words are available. */
> > +	num = (size + sizeof(u64) - 1) / sizeof(u64);
> > +	idx = readq(mlxbf_rsh_scratch_buf_ctl);
> > +	if (idx + num + 1 >= RSH_SCRATCH_BUF_CTL_IDX_MASK)
> > +		num = RSH_SCRATCH_BUF_CTL_IDX_MASK - idx - 1;
> > +	if (num <= 0)
> > +		goto done;
> > +
> > +	/* Write Header. */
> > +	data = (MLXBF_RSH_LOG_TYPE_MSG <<
> MLXBF_RSH_LOG_TYPE_SHIFT)
> > |
> > +		((u64)num << MLXBF_RSH_LOG_LEN_SHIFT) |
> > +		((u64)level << MLXBF_RSH_LOG_LEVEL_SHIFT);
> 
> Should use FIELD_PREP() macro to generate value in "data"

Updated in v3.

> 
> > +	writeq(data, mlxbf_rsh_scratch_buf_data);
> > +
> > +	/* Write message. */
> > +	for (idx = 0, len = size; idx < num && len > 0; idx++) {
> > +		if (len <= sizeof(u64)) {
> > +			data = 0;
> > +			memcpy(&data, buf, len);
> > +			len = 0;
> > +		} else {
> > +			memcpy(&data, buf, sizeof(u64));
> > +			len -= sizeof(u64);
> > +			buf += sizeof(u64);
> > +		}
> > +		writeq(data, mlxbf_rsh_scratch_buf_data);
> > +	}
> > +
> > +done:
> > +	/* Release the semaphore. */
> > +	mlxbf_rsh_log_sem_unlock();
> > +
> > +	/* Ignore the rest if no more space. */
> > +	return count;
> > +}
> > +
> >  static DEVICE_ATTR_RW(post_reset_wdog);  static
> > DEVICE_ATTR_RW(reset_action);  static
> > DEVICE_ATTR_RW(second_reset_action);
> >  static DEVICE_ATTR_RO(lifecycle_state);  static
> > DEVICE_ATTR_RO(secure_boot_fuse_state);
> >  static DEVICE_ATTR_WO(fw_reset);
> > +static DEVICE_ATTR_WO(rsh_log);
> >
> >  static struct attribute *mlxbf_bootctl_attrs[] = {
> >  	&dev_attr_post_reset_wdog.attr,
> > @@ -280,6 +407,7 @@ static struct attribute *mlxbf_bootctl_attrs[] = {
> >  	&dev_attr_lifecycle_state.attr,
> >  	&dev_attr_secure_boot_fuse_state.attr,
> >  	&dev_attr_fw_reset.attr,
> > +	&dev_attr_rsh_log.attr,
> >  	NULL
> >  };
> >
> > @@ -345,6 +473,7 @@ static bool mlxbf_bootctl_guid_match(const guid_t
> *guid,
> > static int mlxbf_bootctl_probe(struct platform_device *pdev)  {
> >  	struct arm_smccc_res res = { 0 };
> > +	void __iomem *reg;
> >  	guid_t guid;
> >  	int ret;
> >
> > @@ -358,6 +487,18 @@ static int mlxbf_bootctl_probe(struct
> platform_device
> > *pdev)
> >  	if (IS_ERR(mlxbf_rsh_boot_cnt))
> >  		return PTR_ERR(mlxbf_rsh_boot_cnt);
> >
> > +	/* Get the resource of the bootfifo counter register. */
> 
> Wrong comment, seems like cut-and-paste error

Updated in v3.

> 
> > +	mlxbf_rsh_semaphore = devm_platform_ioremap_resource(pdev, 2);
> > +	if (IS_ERR(mlxbf_rsh_semaphore))
> > +		return PTR_ERR(mlxbf_rsh_semaphore);
> > +
> > +	/* Get the resource of the bootfifo counter register. */
> 
> Wrong comment, seems like cut-and-paste error

Updated in v3.

> 
> > +	reg = devm_platform_ioremap_resource(pdev, 3);
> > +	if (IS_ERR(reg))
> > +		return PTR_ERR(reg);
> > +	mlxbf_rsh_scratch_buf_ctl = reg +
> MLXBF_RSH_SCRATCH_BUF_CTL_OFF;
> > +	mlxbf_rsh_scratch_buf_data = reg +
> > MLXBF_RSH_SCRATCH_BUF_DATA_OFF;
> > +
> >  	/* Ensure we have the UUID we expect for this service. */
> >  	arm_smccc_smc(MLXBF_BOOTCTL_SIP_SVC_UID, 0, 0, 0, 0, 0, 0, 0,
> > &res);
> >  	guid_parse(mlxbf_bootctl_svc_uuid_str, &guid);
> > --
> > 2.30.1





[Index of Archives]     [Linux Kernel Development]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux