Add x86_gpio_button info for the yb1-x90f/l describing the lid switch
on the Lenovo Yoga Book Android models.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/platform/x86/x86-android-tablets/lenovo.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/drivers/platform/x86/x86-android-tablets/lenovo.c b/drivers/platform/x86/x86-android-tablets/lenovo.c
index 270c4712fa7c..50031e902a2c 100644
--- a/drivers/platform/x86/x86-android-tablets/lenovo.c
+++ b/drivers/platform/x86/x86-android-tablets/lenovo.c
@@ -160,6 +160,19 @@ static const struct x86_serdev_info lenovo_yb1_x90_serdevs[] __initconst = {
},
};
+static struct x86_gpio_button lenovo_yb1_x90_lid = {
+ .button = {
+ .code = SW_LID,
+ .active_low = true,
+ .desc = "lid_sw",
+ .type = EV_SW,
+ .wakeup = true,
+ .debounce_interval = 50,
+ },
+ .chip = "INT33FF:02",
+ .pin = 19,
+};
+
static struct gpiod_lookup_table lenovo_yb1_x90_goodix_gpios = {
.dev_id = "i2c-goodix_ts",
.table = {
@@ -218,6 +231,7 @@ const struct x86_dev_info lenovo_yogabook_x90_info __initconst = {
.pdev_count = ARRAY_SIZE(lenovo_yb1_x90_pdevs),
.serdev_info = lenovo_yb1_x90_serdevs,
.serdev_count = ARRAY_SIZE(lenovo_yb1_x90_serdevs),
+ .gpio_button = &lenovo_yb1_x90_lid,
.gpiod_lookup_tables = lenovo_yb1_x90_gpios,
.init = lenovo_yb1_x90_init,
};
--
2.39.2
