After recent i2c-hid-of changes, the i2c-hid-of driver could be used
for the Yoga Book HiDeep touchscreen comment instead of the native hideep
driver. Update the comment to reflect this.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/platform/x86/x86-android-tablets/lenovo.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/drivers/platform/x86/x86-android-tablets/lenovo.c b/drivers/platform/x86/x86-android-tablets/lenovo.c
index a571dcd11544..b5dd74bf9e8c 100644
--- a/drivers/platform/x86/x86-android-tablets/lenovo.c
+++ b/drivers/platform/x86/x86-android-tablets/lenovo.c
@@ -41,10 +41,13 @@ static struct lp855x_platform_data lenovo_lp8557_pdata = {
/* Lenovo Yoga Book X90F / X90L's Android factory img has everything hardcoded */
/*
- * The HiDeep IST940E touchscreen comes up in HID mode and could alternatively
- * be used in I2C-HID mode (I2C-HID descriptor reg 0x0020) if i2c-hid-of.c is
- * modified to use generic (non-OF) device-properties and thought to deal with
- * the reset GPIO. "hideep,force-native-protocol" resets it to native mode.
+ * The HiDeep IST940E touchscreen comes up in I2C-HID mode. The native protocol
+ * reports ABS_MT_PRESSURE and ABS_MT_TOUCH_MAJOR which are not reported in HID
+ * mode, so using native mode is preferred.
+ * It could alternatively be used in HID mode by changing the properties to:
+ * PROPERTY_ENTRY_U32("hid-descr-addr", 0x0020),
+ * PROPERTY_ENTRY_U32("post-reset-deassert-delay-ms", 120),
+ * and changing board_info.type to "hid-over-i2c".
*/
static const struct property_entry lenovo_yb1_x90_hideep_ts_props[] = {
PROPERTY_ENTRY_U32("touchscreen-size-x", 1200),
--
2.39.2
