Add the necessaty info to instantiate the I2C device for the touchscreen
on Lenovo Yoga Tab 3 Pro YT3-X90F tablets.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
.../platform/x86/x86-android-tablets/lenovo.c | 46 +++++++++++++++++++
1 file changed, 46 insertions(+)
diff --git a/drivers/platform/x86/x86-android-tablets/lenovo.c b/drivers/platform/x86/x86-android-tablets/lenovo.c
index 6bdf25c030ed..0555a4e8a1e3 100644
--- a/drivers/platform/x86/x86-android-tablets/lenovo.c
+++ b/drivers/platform/x86/x86-android-tablets/lenovo.c
@@ -11,6 +11,7 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/efi.h>
+#include <linux/mfd/intel_soc_pmic.h>
#include <linux/pinctrl/consumer.h>
#include <linux/pinctrl/machine.h>
#include <linux/platform_data/lp855x.h>
@@ -332,6 +333,17 @@ static const struct software_node lenovo_yt3_bq25892_0_node = {
.properties = lenovo_yt3_bq25892_0_props,
};
+static const struct property_entry lenovo_yt3_hideep_ts_props[] = {
+ PROPERTY_ENTRY_U32("touchscreen-size-x", 1600),
+ PROPERTY_ENTRY_U32("touchscreen-size-y", 2560),
+ PROPERTY_ENTRY_U32("touchscreen-max-pressure", 255),
+ { }
+};
+
+static const struct software_node lenovo_yt3_hideep_ts_node = {
+ .properties = lenovo_yt3_hideep_ts_props,
+};
+
static const struct x86_i2c_client_info lenovo_yt3_i2c_clients[] __initconst = {
{
/* bq27500 fuel-gauge for the flat lipo battery behind the screen */
@@ -367,6 +379,22 @@ static const struct x86_i2c_client_info lenovo_yt3_i2c_clients[] __initconst = {
.swnode = &fg_bq25890_1_supply_node,
},
.adapter_path = "\\_SB_.PCI0.I2C2",
+ }, {
+ /* HiDeep Touchscreen */
+ .board_info = {
+ .type = "hideep_ts",
+ .addr = 0x6c,
+ .dev_name = "hideep_ts",
+ .swnode = &lenovo_yt3_hideep_ts_node,
+ },
+ .adapter_path = "\\_SB_.PCI0.I2C6",
+ .irq_data = {
+ .type = X86_ACPI_IRQ_TYPE_GPIOINT,
+ .chip = "INT33FF:03",
+ .index = 77,
+ .trigger = ACPI_LEVEL_SENSITIVE,
+ .polarity = ACPI_ACTIVE_LOW,
+ },
}
};
@@ -407,11 +435,29 @@ static int __init lenovo_yt3_init(void)
gpiod_set_value(gpiod, 0);
+ /* Enable the regulators used by the touchscreen */
+ intel_soc_pmic_exec_mipi_pmic_seq_element(0x6e, 0x9b, 0x02, 0xff);
+ intel_soc_pmic_exec_mipi_pmic_seq_element(0x6e, 0xa0, 0x02, 0xff);
+
return 0;
}
+static struct gpiod_lookup_table lenovo_yt3_hideep_gpios = {
+ .dev_id = "i2c-hideep_ts",
+ .table = {
+ GPIO_LOOKUP("INT33FF:00", 7, "reset", GPIO_ACTIVE_LOW),
+ { }
+ },
+};
+
+static struct gpiod_lookup_table * const lenovo_yt3_gpios[] = {
+ &lenovo_yt3_hideep_gpios,
+ NULL
+};
+
const struct x86_dev_info lenovo_yt3_info __initconst = {
.i2c_client_info = lenovo_yt3_i2c_clients,
.i2c_client_count = ARRAY_SIZE(lenovo_yt3_i2c_clients),
+ .gpiod_lookup_tables = lenovo_yt3_gpios,
.init = lenovo_yt3_init,
};
--
2.39.1
