[PATCH v6 2/5] platform/x86: int3472/discrete: Refactor GPIO to sensor mapping

[Hans de Goede <hdegoede@xxxxxxxxxx>]

Add a helper function to map the type returned by the _DSM
method to a function name + the default polarity for that function.

And fold the INT3472_GPIO_TYPE_RESET and INT3472_GPIO_TYPE_POWERDOWN
cases into a single generic case.

This is a preparation patch for further GPIO mapping changes.

Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
Changes in v3:
- Add break to default case

Changes in v2:
- Make the helper function doing the type -> function mapping,
  also return a default polarity for the function.
---
 drivers/platform/x86/intel/int3472/discrete.c | 45 +++++++++++++++----
 1 file changed, 36 insertions(+), 9 deletions(-)

diff --git a/drivers/platform/x86/intel/int3472/discrete.c b/drivers/platform/x86/intel/int3472/discrete.c
index c42c3faa2c32..708d51f9b41d 100644
--- a/drivers/platform/x86/intel/int3472/discrete.c
+++ b/drivers/platform/x86/intel/int3472/discrete.c
@@ -188,6 +188,36 @@ static int skl_int3472_map_gpio_to_clk(struct int3472_discrete_device *int3472,
 	return 0;
 }
 
+static void int3472_get_func_and_polarity(u8 type, const char **func, u32 *polarity)
+{
+	switch (type) {
+	case INT3472_GPIO_TYPE_RESET:
+		*func = "reset";
+		*polarity = GPIO_ACTIVE_LOW;
+		break;
+	case INT3472_GPIO_TYPE_POWERDOWN:
+		*func = "powerdown";
+		*polarity = GPIO_ACTIVE_LOW;
+		break;
+	case INT3472_GPIO_TYPE_CLK_ENABLE:
+		*func = "clk-enable";
+		*polarity = GPIO_ACTIVE_HIGH;
+		break;
+	case INT3472_GPIO_TYPE_PRIVACY_LED:
+		*func = "privacy-led";
+		*polarity = GPIO_ACTIVE_HIGH;
+		break;
+	case INT3472_GPIO_TYPE_POWER_ENABLE:
+		*func = "power-enable";
+		*polarity = GPIO_ACTIVE_HIGH;
+		break;
+	default:
+		*func = "unknown";
+		*polarity = GPIO_ACTIVE_HIGH;
+		break;
+	}
+}
+
 /**
  * skl_int3472_handle_gpio_resources: Map PMIC resources to consuming sensor
  * @ares: A pointer to a &struct acpi_resource
@@ -227,6 +257,8 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,
 	struct acpi_resource_gpio *agpio;
 	union acpi_object *obj;
 	const char *err_msg;
+	const char *func;
+	u32 polarity;
 	int ret;
 	u8 type;
 
@@ -250,19 +282,14 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,
 
 	type = obj->integer.value & 0xff;
 
+	int3472_get_func_and_polarity(type, &func, &polarity);
+
 	switch (type) {
 	case INT3472_GPIO_TYPE_RESET:
-		ret = skl_int3472_map_gpio_to_sensor(int3472, agpio, "reset",
-						     GPIO_ACTIVE_LOW);
-		if (ret)
-			err_msg = "Failed to map reset pin to sensor\n";
-
-		break;
 	case INT3472_GPIO_TYPE_POWERDOWN:
-		ret = skl_int3472_map_gpio_to_sensor(int3472, agpio, "powerdown",
-						     GPIO_ACTIVE_LOW);
+		ret = skl_int3472_map_gpio_to_sensor(int3472, agpio, func, polarity);
 		if (ret)
-			err_msg = "Failed to map powerdown pin to sensor\n";
+			err_msg = "Failed to map GPIO pin to sensor\n";
 
 		break;
 	case INT3472_GPIO_TYPE_CLK_ENABLE:
-- 
2.39.1