https://bugzilla.kernel.org/show_bug.cgi?id=204807 --- Comment #282 from Jeroen Beerstra (jeroen@xxxxxxxxxxxx) --- Looks good to me: $ sensors k10temp-pci-00c3 Adapter: PCI adapter Tctl: +64.0°C Tccd1: +35.4°C Tccd2: +35.1°C nct6799-isa-0290 Adapter: ISA adapter in0: 1.37 V (min = +0.00 V, max = +1.74 V) in1: 1000.00 mV (min = +0.00 V, max = +0.00 V) ALARM in2: 3.39 V (min = +0.00 V, max = +0.00 V) ALARM in3: 3.34 V (min = +0.00 V, max = +0.00 V) ALARM in4: 1.02 V (min = +0.00 V, max = +0.00 V) ALARM in5: 1.03 V (min = +0.00 V, max = +0.00 V) ALARM in6: 752.00 mV (min = +0.00 V, max = +0.00 V) ALARM in7: 3.39 V (min = +0.00 V, max = +0.00 V) ALARM in8: 3.30 V (min = +0.00 V, max = +0.00 V) ALARM in9: 1.67 V (min = +0.00 V, max = +0.00 V) ALARM in10: 560.00 mV (min = +0.00 V, max = +0.00 V) ALARM in11: 560.00 mV (min = +0.00 V, max = +0.00 V) ALARM in12: 1.03 V (min = +0.00 V, max = +0.00 V) ALARM in13: 496.00 mV (min = +0.00 V, max = +0.00 V) ALARM in14: 424.00 mV (min = +0.00 V, max = +0.00 V) ALARM fan1: 755 RPM (min = 0 RPM) fan2: 819 RPM (min = 0 RPM) fan3: 712 RPM (min = 0 RPM) fan4: 0 RPM (min = 0 RPM) fan5: 674 RPM (min = 0 RPM) fan7: 0 RPM (min = 0 RPM) SYSTIN: +31.0°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor CPUTIN: +36.5°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor AUXTIN0: +39.5°C sensor = thermistor AUXTIN1: +19.0°C sensor = thermistor AUXTIN2: +20.0°C sensor = thermistor AUXTIN3: +73.0°C sensor = thermistor PECI Agent 0 Calibration: +54.0°C PCH_CHIP_CPU_MAX_TEMP: +0.0°C PCH_CHIP_TEMP: +0.0°C PCH_CPU_TEMP: +0.0°C TSI0_TEMP: +64.5°C intrusion0: ALARM intrusion1: ALARM beep_enable: disabled amdgpu-pci-0e00 Adapter: PCI adapter vddgfx: 1.34 V vddnb: 1.01 V edge: +41.0°C PPT: 55.25 W Linux beerstra 6.1.4-1.el9_1.beerstra.x86_64 #1 SMP PREEMPT_DYNAMIC Sat Jan 7 19:36:39 CET 2023 x86_64 x86_64 x86_64 GNU/Linux The patch didn't apply cleanly to 6.1.4 though, but that is because some boards were already included. Voltages seem off though. -- You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
