The Z830 has some buttons that will only work properly as "quickstart"
buttons. To enable them in that mode, a value between 1 and 7 must be
used for HCI_HOTKEY_EVENT. Windows uses 0x5 on this laptop so use that for
maximum predictability and compatibility.
As there is not yet a known way of auto detection, this patch uses a DMI
quirk table. A module parameter is exposed to allow setting this on other
models for testing.
Signed-off-by: Arvid Norlander <lkml@xxxxxxxxx>
---
drivers/platform/x86/toshiba_acpi.c | 31 ++++++++++++++++++++++++++++-
1 file changed, 30 insertions(+), 1 deletion(-)
diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c
index 9f1394b73895..dce1f5049bf8 100644
--- a/drivers/platform/x86/toshiba_acpi.c
+++ b/drivers/platform/x86/toshiba_acpi.c
@@ -58,6 +58,11 @@ module_param(turn_on_panel_on_resume, int, 0644);
MODULE_PARM_DESC(turn_on_panel_on_resume,
"Call HCI_PANEL_POWER_ON on resume (-1 = auto, 0 = no, 1 = yes");
+static int hci_hotkey_quickstart = -1;
+module_param(hci_hotkey_quickstart, int, 0644);
+MODULE_PARM_DESC(hci_hotkey_quickstart,
+ "Call HCI_HOTKEY_EVENT with value 0x5 for quickstart button support (-1 = auto, 0 = no, 1 = yes");
+
#define TOSHIBA_WMI_EVENT_GUID "59142400-C6A3-40FA-BADB-8A2652834100"
/* Scan code for Fn key on TOS1900 models */
@@ -137,6 +142,7 @@ MODULE_PARM_DESC(turn_on_panel_on_resume,
#define HCI_ACCEL_MASK 0x7fff
#define HCI_ACCEL_DIRECTION_MASK 0x8000
#define HCI_HOTKEY_DISABLE 0x0b
+#define HCI_HOTKEY_ENABLE_QUICKSTART 0x05
#define HCI_HOTKEY_ENABLE 0x09
#define HCI_HOTKEY_SPECIAL_FUNCTIONS 0x10
#define HCI_LCD_BRIGHTNESS_BITS 3
@@ -2731,10 +2737,15 @@ static int toshiba_acpi_enable_hotkeys(struct toshiba_acpi_dev *dev)
return -ENODEV;
/*
+ * Enable quickstart buttons if supported.
+ *
* Enable the "Special Functions" mode only if they are
* supported and if they are activated.
*/
- if (dev->kbd_function_keys_supported && dev->special_functions)
+ if (hci_hotkey_quickstart)
+ result = hci_write(dev, HCI_HOTKEY_EVENT,
+ HCI_HOTKEY_ENABLE_QUICKSTART);
+ else if (dev->kbd_function_keys_supported && dev->special_functions)
result = hci_write(dev, HCI_HOTKEY_EVENT,
HCI_HOTKEY_SPECIAL_FUNCTIONS);
else
@@ -3287,6 +3298,21 @@ static const struct dmi_system_id turn_on_panel_on_resume_dmi_ids[] = {
},
};
+/*
+ * Some Toshibas use "quickstart" keys. On these, HCI_HOTKEY_EVENT must use
+ * the value HCI_HOTKEY_ENABLE_QUICKSTART.
+ */
+static const struct dmi_system_id hci_hotkey_quickstart_dmi_ids[] = {
+ {
+ /* Toshiba Satellite/Portégé Z830 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Z830"),
+ },
+ },
+};
+
+
static int toshiba_acpi_add(struct acpi_device *acpi_dev)
{
struct toshiba_acpi_dev *dev;
@@ -3447,6 +3473,9 @@ static int toshiba_acpi_add(struct acpi_device *acpi_dev)
if (turn_on_panel_on_resume == -1)
turn_on_panel_on_resume = dmi_check_system(turn_on_panel_on_resume_dmi_ids);
+ if (hci_hotkey_quickstart == -1)
+ hci_hotkey_quickstart = dmi_check_system(hci_hotkey_quickstart_dmi_ids);
+
toshiba_wwan_available(dev);
if (dev->wwan_supported)
toshiba_acpi_setup_wwan_rfkill(dev);
--
2.37.3
