Hi, On 8/19/22 20:01, Mario Limonciello wrote: > It was observed that on a Thinkpad T14 Gen1 (AMD) that the platform > profile is starting up in 'low-power' mode after refreshing what the > firmware had. This is most likely a firmware bug, but as a harmless > workaround set the default profile to 'balanced' at thinkpad_acpi startup. > > Reported-by: madcatx@xxxxxxxx > Link: https://bugzilla.kernel.org/show_bug.cgi?id=216347 > Signed-off-by: Mario Limonciello <mario.limonciello@xxxxxxx> > --- > v1->v2 > * Only run on AMD systems (PSC mode) Thank you for your patch, I've applied this patch to my review-hans branch: https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git/log/?h=review-hans Note I will also add this to the fixes branch and I will include this in the next fixes pull-req for 6.0 . Once I've run some tests on this branch the patches there will be added to the platform-drivers-x86/for-next branch and eventually will be included in the pdx86 pull-request to Linus for the next merge-window. Regards, Hans > > drivers/platform/x86/thinkpad_acpi.c | 7 +++---- > 1 file changed, 3 insertions(+), 4 deletions(-) > > diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c > index 22d4e8633e30..2dbb9fc011a7 100644 > --- a/drivers/platform/x86/thinkpad_acpi.c > +++ b/drivers/platform/x86/thinkpad_acpi.c > @@ -10592,10 +10592,9 @@ static int tpacpi_dytc_profile_init(struct ibm_init_struct *iibm) > /* Ensure initial values are correct */ > dytc_profile_refresh(); > > - /* Set AMT correctly now we know current profile */ > - if ((dytc_capabilities & BIT(DYTC_FC_PSC)) && > - (dytc_capabilities & BIT(DYTC_FC_AMT))) > - dytc_control_amt(dytc_current_profile == PLATFORM_PROFILE_BALANCED); > + /* Workaround for https://bugzilla.kernel.org/show_bug.cgi?id=216347 */ > + if (dytc_capabilities & BIT(DYTC_FC_PSC)) > + dytc_profile_set(NULL, PLATFORM_PROFILE_BALANCED); > > return 0; > }
