On 8/18/22 1:42 PM, Hans de Goede wrote:
Move the WMI interface definitions to a header, so that the definitions
can be shared with drivers/acpi/video_detect.c .
Suggested-by: Daniel Dadap <ddadap@xxxxxxxxxx>
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
MAINTAINERS | 1 +
.../platform/x86/nvidia-wmi-ec-backlight.c | 66 +----------------
.../x86/nvidia-wmi-ec-backlight.h | 70 +++++++++++++++++++
3 files changed, 72 insertions(+), 65 deletions(-)
create mode 100644 include/linux/platform_data/x86/nvidia-wmi-ec-backlight.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 8a5012ba6ff9..8d59c6e9b4db 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14526,6 +14526,7 @@ M: Daniel Dadap <ddadap@xxxxxxxxxx>
L: platform-driver-x86@xxxxxxxxxxxxxxx
S: Supported
F: drivers/platform/x86/nvidia-wmi-ec-backlight.c
+F: include/linux/platform_data/x86/nvidia-wmi-ec-backlight.h
NVM EXPRESS DRIVER
M: Keith Busch <kbusch@xxxxxxxxxx>
diff --git a/drivers/platform/x86/nvidia-wmi-ec-backlight.c b/drivers/platform/x86/nvidia-wmi-ec-backlight.c
index 61e37194df70..e84e1d629b14 100644
--- a/drivers/platform/x86/nvidia-wmi-ec-backlight.c
+++ b/drivers/platform/x86/nvidia-wmi-ec-backlight.c
@@ -7,74 +7,10 @@
#include <linux/backlight.h>
#include <linux/mod_devicetable.h>
#include <linux/module.h>
+#include <linux/platform_data/x86/nvidia-wmi-ec-backlight.h>
#include <linux/types.h>
#include <linux/wmi.h>
-/**
- * enum wmi_brightness_method - WMI method IDs
- * @WMI_BRIGHTNESS_METHOD_LEVEL: Get/Set EC brightness level status
- * @WMI_BRIGHTNESS_METHOD_SOURCE: Get/Set EC Brightness Source
- */
-enum wmi_brightness_method {
- WMI_BRIGHTNESS_METHOD_LEVEL = 1,
- WMI_BRIGHTNESS_METHOD_SOURCE = 2,
- WMI_BRIGHTNESS_METHOD_MAX
-};
-
-/**
- * enum wmi_brightness_mode - Operation mode for WMI-wrapped method
- * @WMI_BRIGHTNESS_MODE_GET: Get the current brightness level/source.
- * @WMI_BRIGHTNESS_MODE_SET: Set the brightness level.
- * @WMI_BRIGHTNESS_MODE_GET_MAX_LEVEL: Get the maximum brightness level. This
- * is only valid when the WMI method is
- * %WMI_BRIGHTNESS_METHOD_LEVEL.
- */
-enum wmi_brightness_mode {
- WMI_BRIGHTNESS_MODE_GET = 0,
- WMI_BRIGHTNESS_MODE_SET = 1,
- WMI_BRIGHTNESS_MODE_GET_MAX_LEVEL = 2,
- WMI_BRIGHTNESS_MODE_MAX
-};
-
-/**
- * enum wmi_brightness_source - Backlight brightness control source selection
- * @WMI_BRIGHTNESS_SOURCE_GPU: Backlight brightness is controlled by the GPU.
- * @WMI_BRIGHTNESS_SOURCE_EC: Backlight brightness is controlled by the
- * system's Embedded Controller (EC).
- * @WMI_BRIGHTNESS_SOURCE_AUX: Backlight brightness is controlled over the
- * DisplayPort AUX channel.
- */
-enum wmi_brightness_source {
- WMI_BRIGHTNESS_SOURCE_GPU = 1,
- WMI_BRIGHTNESS_SOURCE_EC = 2,
- WMI_BRIGHTNESS_SOURCE_AUX = 3,
- WMI_BRIGHTNESS_SOURCE_MAX
-};
-
-/**
- * struct wmi_brightness_args - arguments for the WMI-wrapped ACPI method
- * @mode: Pass in an &enum wmi_brightness_mode value to select between
- * getting or setting a value.
- * @val: In parameter for value to set when using %WMI_BRIGHTNESS_MODE_SET
- * mode. Not used in conjunction with %WMI_BRIGHTNESS_MODE_GET or
- * %WMI_BRIGHTNESS_MODE_GET_MAX_LEVEL mode.
- * @ret: Out parameter returning retrieved value when operating in
- * %WMI_BRIGHTNESS_MODE_GET or %WMI_BRIGHTNESS_MODE_GET_MAX_LEVEL
- * mode. Not used in %WMI_BRIGHTNESS_MODE_SET mode.
- * @ignored: Padding; not used. The ACPI method expects a 24 byte params struct.
- *
- * This is the parameters structure for the WmiBrightnessNotify ACPI method as
- * wrapped by WMI. The value passed in to @val or returned by @ret will be a
- * brightness value when the WMI method ID is %WMI_BRIGHTNESS_METHOD_LEVEL, or
- * an &enum wmi_brightness_source value with %WMI_BRIGHTNESS_METHOD_SOURCE.
- */
-struct wmi_brightness_args {
- u32 mode;
- u32 val;
- u32 ret;
- u32 ignored[3];
-};
-
/**
* wmi_brightness_notify() - helper function for calling WMI-wrapped ACPI method
* @w: Pointer to the struct wmi_device identified by %WMI_BRIGHTNESS_GUID
diff --git a/include/linux/platform_data/x86/nvidia-wmi-ec-backlight.h b/include/linux/platform_data/x86/nvidia-wmi-ec-backlight.h
new file mode 100644
index 000000000000..d83104c6c6cb
--- /dev/null
+++ b/include/linux/platform_data/x86/nvidia-wmi-ec-backlight.h
@@ -0,0 +1,70 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
Should the copyright notice from nvidia-wmi-ec-backlight be copied here
as well?
+#ifndef __PLATFORM_DATA_X86_NVIDIA_WMI_EC_BACKLIGHT_H
+#define __PLATFORM_DATA_X86_NVIDIA_WMI_EC_BACKLIGHT_H
+
+/**
+ * enum wmi_brightness_method - WMI method IDs
+ * @WMI_BRIGHTNESS_METHOD_LEVEL: Get/Set EC brightness level status
+ * @WMI_BRIGHTNESS_METHOD_SOURCE: Get/Set EC Brightness Source
+ */
+enum wmi_brightness_method {
+ WMI_BRIGHTNESS_METHOD_LEVEL = 1,
+ WMI_BRIGHTNESS_METHOD_SOURCE = 2,
+ WMI_BRIGHTNESS_METHOD_MAX
+};
It might be nice, but certainly not essential, to namespace these
better, now that they're no longer internal to the EC backlight driver.
I did that in the version of this change that I had started working up,
but got kind of annoyed that it made a lot of lines go over 80 columns,
and then got distracted by other work and never ended up finishing the
change up. I guess it's probably fine to leave them as is, since there
won't be many files that include this header.
+
+/**
+ * enum wmi_brightness_mode - Operation mode for WMI-wrapped method
+ * @WMI_BRIGHTNESS_MODE_GET: Get the current brightness level/source.
+ * @WMI_BRIGHTNESS_MODE_SET: Set the brightness level.
+ * @WMI_BRIGHTNESS_MODE_GET_MAX_LEVEL: Get the maximum brightness level. This
+ * is only valid when the WMI method is
+ * %WMI_BRIGHTNESS_METHOD_LEVEL.
+ */
+enum wmi_brightness_mode {
+ WMI_BRIGHTNESS_MODE_GET = 0,
+ WMI_BRIGHTNESS_MODE_SET = 1,
+ WMI_BRIGHTNESS_MODE_GET_MAX_LEVEL = 2,
+ WMI_BRIGHTNESS_MODE_MAX
+};
+
+/**
+ * enum wmi_brightness_source - Backlight brightness control source selection
+ * @WMI_BRIGHTNESS_SOURCE_GPU: Backlight brightness is controlled by the GPU.
+ * @WMI_BRIGHTNESS_SOURCE_EC: Backlight brightness is controlled by the
+ * system's Embedded Controller (EC).
+ * @WMI_BRIGHTNESS_SOURCE_AUX: Backlight brightness is controlled over the
+ * DisplayPort AUX channel.
+ */
+enum wmi_brightness_source {
+ WMI_BRIGHTNESS_SOURCE_GPU = 1,
+ WMI_BRIGHTNESS_SOURCE_EC = 2,
+ WMI_BRIGHTNESS_SOURCE_AUX = 3,
+ WMI_BRIGHTNESS_SOURCE_MAX
+};
+
+/**
+ * struct wmi_brightness_args - arguments for the WMI-wrapped ACPI method
+ * @mode: Pass in an &enum wmi_brightness_mode value to select between
+ * getting or setting a value.
+ * @val: In parameter for value to set when using %WMI_BRIGHTNESS_MODE_SET
+ * mode. Not used in conjunction with %WMI_BRIGHTNESS_MODE_GET or
+ * %WMI_BRIGHTNESS_MODE_GET_MAX_LEVEL mode.
+ * @ret: Out parameter returning retrieved value when operating in
+ * %WMI_BRIGHTNESS_MODE_GET or %WMI_BRIGHTNESS_MODE_GET_MAX_LEVEL
+ * mode. Not used in %WMI_BRIGHTNESS_MODE_SET mode.
+ * @ignored: Padding; not used. The ACPI method expects a 24 byte params struct.
+ *
+ * This is the parameters structure for the WmiBrightnessNotify ACPI method as
+ * wrapped by WMI. The value passed in to @val or returned by @ret will be a
+ * brightness value when the WMI method ID is %WMI_BRIGHTNESS_METHOD_LEVEL, or
+ * an &enum wmi_brightness_source value with %WMI_BRIGHTNESS_METHOD_SOURCE.
+ */
+struct wmi_brightness_args {
+ u32 mode;
+ u32 val;
+ u32 ret;
+ u32 ignored[3];
+};
+
+#endif
