Hi,
On 6/6/22 18:41, Andy Shevchenko wrote:
> From: Henning Schild <henning.schild@xxxxxxxxxxx>
>
> The two drivers that used to use this have been switched over to the
> common P2SB accessor, so this code is not needed any longer.
>
> Signed-off-by: Henning Schild <henning.schild@xxxxxxxxxxx>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Thanks, patch looks good to me:
Reviewed-by: Hans de Goede <hdegoede@xxxxxxxxxx>
Also Ack for merging this through the MFD tree.
Regards,
Hans
> ---
> drivers/platform/x86/simatic-ipc.c | 38 -------------------
> .../platform_data/x86/simatic-ipc-base.h | 2 -
> 2 files changed, 40 deletions(-)
>
> diff --git a/drivers/platform/x86/simatic-ipc.c b/drivers/platform/x86/simatic-ipc.c
> index b599cda5ba3c..26c35e1660cb 100644
> --- a/drivers/platform/x86/simatic-ipc.c
> +++ b/drivers/platform/x86/simatic-ipc.c
> @@ -101,44 +101,6 @@ static int register_platform_devices(u32 station_id)
> return 0;
> }
>
> -/* FIXME: this should eventually be done with generic P2SB discovery code
> - * the individual drivers for watchdogs and LEDs access memory that implements
> - * GPIO, but pinctrl will not come up because of missing ACPI entries
> - *
> - * While there is no conflict a cleaner solution would be to somehow bring up
> - * pinctrl even with these ACPI entries missing, and base the drivers on pinctrl.
> - * After which the following function could be dropped, together with the code
> - * poking the memory.
> - */
> -/*
> - * Get membase address from PCI, used in leds and wdt module. Here we read
> - * the bar0. The final address calculation is done in the appropriate modules
> - */
> -u32 simatic_ipc_get_membase0(unsigned int p2sb)
> -{
> - struct pci_bus *bus;
> - u32 bar0 = 0;
> - /*
> - * The GPIO memory is in bar0 of the hidden P2SB device.
> - * Unhide the device to have a quick look at it, before we hide it
> - * again.
> - * Also grab the pci rescan lock so that device does not get discovered
> - * and remapped while it is visible.
> - * This code is inspired by drivers/mfd/lpc_ich.c
> - */
> - bus = pci_find_bus(0, 0);
> - pci_lock_rescan_remove();
> - pci_bus_write_config_byte(bus, p2sb, 0xE1, 0x0);
> - pci_bus_read_config_dword(bus, p2sb, PCI_BASE_ADDRESS_0, &bar0);
> -
> - bar0 &= ~0xf;
> - pci_bus_write_config_byte(bus, p2sb, 0xE1, 0x1);
> - pci_unlock_rescan_remove();
> -
> - return bar0;
> -}
> -EXPORT_SYMBOL(simatic_ipc_get_membase0);
> -
> static int __init simatic_ipc_init_module(void)
> {
> const struct dmi_system_id *match;
> diff --git a/include/linux/platform_data/x86/simatic-ipc-base.h b/include/linux/platform_data/x86/simatic-ipc-base.h
> index 62d2bc774067..39fefd48cf4d 100644
> --- a/include/linux/platform_data/x86/simatic-ipc-base.h
> +++ b/include/linux/platform_data/x86/simatic-ipc-base.h
> @@ -24,6 +24,4 @@ struct simatic_ipc_platform {
> u8 devmode;
> };
>
> -u32 simatic_ipc_get_membase0(unsigned int p2sb);
> -
> #endif /* __PLATFORM_DATA_X86_SIMATIC_IPC_BASE_H */
