Re: [PATCH v9 23/32] virtio_pci: queue_reset: support VIRTIO_F_RING_RESET

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Apr 13, 2022 at 11:23 AM Xuan Zhuo <xuanzhuo@xxxxxxxxxxxxxxxxx> wrote:
>
> On Tue, 12 Apr 2022 15:07:58 +0800, Jason Wang <jasowang@xxxxxxxxxx> wrote:
> >
> > 在 2022/4/6 上午11:43, Xuan Zhuo 写道:
> > > This patch implements virtio pci support for QUEUE RESET.
> > >
> > > Performing reset on a queue is divided into these steps:
> > >
> > >   1. notify the device to reset the queue
> > >   2. recycle the buffer submitted
> > >   3. reset the vring (may re-alloc)
> > >   4. mmap vring to device, and enable the queue
> > >
> > > This patch implements virtio_reset_vq(), virtio_enable_resetq() in the
> > > pci scenario.
> > >
> > > Signed-off-by: Xuan Zhuo <xuanzhuo@xxxxxxxxxxxxxxxxx>
> > > ---
> > >   drivers/virtio/virtio_pci_common.c |  8 +--
> > >   drivers/virtio/virtio_pci_modern.c | 84 ++++++++++++++++++++++++++++++
> > >   drivers/virtio/virtio_ring.c       |  2 +
> > >   include/linux/virtio.h             |  1 +
> > >   4 files changed, 92 insertions(+), 3 deletions(-)
> > >
> > > diff --git a/drivers/virtio/virtio_pci_common.c b/drivers/virtio/virtio_pci_common.c
> > > index fdbde1db5ec5..863d3a8a0956 100644
> > > --- a/drivers/virtio/virtio_pci_common.c
> > > +++ b/drivers/virtio/virtio_pci_common.c
> > > @@ -248,9 +248,11 @@ static void vp_del_vq(struct virtqueue *vq)
> > >     struct virtio_pci_vq_info *info = vp_dev->vqs[vq->index];
> > >     unsigned long flags;
> > >
> > > -   spin_lock_irqsave(&vp_dev->lock, flags);
> > > -   list_del(&info->node);
> > > -   spin_unlock_irqrestore(&vp_dev->lock, flags);
> > > +   if (!vq->reset) {
> >
> >
> > On which condition that we may hit this path?
> >
> >
> > > +           spin_lock_irqsave(&vp_dev->lock, flags);
> > > +           list_del(&info->node);
> > > +           spin_unlock_irqrestore(&vp_dev->lock, flags);
> > > +   }
> > >
> > >     vp_dev->del_vq(info);
> > >     kfree(info);
> > > diff --git a/drivers/virtio/virtio_pci_modern.c b/drivers/virtio/virtio_pci_modern.c
> > > index 49a4493732cf..cb5d38f1c9c8 100644
> > > --- a/drivers/virtio/virtio_pci_modern.c
> > > +++ b/drivers/virtio/virtio_pci_modern.c
> > > @@ -34,6 +34,9 @@ static void vp_transport_features(struct virtio_device *vdev, u64 features)
> > >     if ((features & BIT_ULL(VIRTIO_F_SR_IOV)) &&
> > >                     pci_find_ext_capability(pci_dev, PCI_EXT_CAP_ID_SRIOV))
> > >             __virtio_set_bit(vdev, VIRTIO_F_SR_IOV);
> > > +
> > > +   if (features & BIT_ULL(VIRTIO_F_RING_RESET))
> > > +           __virtio_set_bit(vdev, VIRTIO_F_RING_RESET);
> > >   }
> > >
> > >   /* virtio config->finalize_features() implementation */
> > > @@ -199,6 +202,83 @@ static int vp_active_vq(struct virtqueue *vq, u16 msix_vec)
> > >     return 0;
> > >   }
> > >
> > > +static int vp_modern_reset_vq(struct virtqueue *vq)
> > > +{
> > > +   struct virtio_pci_device *vp_dev = to_vp_device(vq->vdev);
> > > +   struct virtio_pci_modern_device *mdev = &vp_dev->mdev;
> > > +   struct virtio_pci_vq_info *info;
> > > +   unsigned long flags;
> > > +
> > > +   if (!virtio_has_feature(vq->vdev, VIRTIO_F_RING_RESET))
> > > +           return -ENOENT;
> > > +
> > > +   vp_modern_set_queue_reset(mdev, vq->index);
> > > +
> > > +   info = vp_dev->vqs[vq->index];
> > > +
> > > +   /* delete vq from irq handler */
> > > +   spin_lock_irqsave(&vp_dev->lock, flags);
> > > +   list_del(&info->node);
> > > +   spin_unlock_irqrestore(&vp_dev->lock, flags);
> > > +
> > > +   INIT_LIST_HEAD(&info->node);
> > > +
> > > +   /* For the case where vq has an exclusive irq, to prevent the irq from
> > > +    * being received again and the pending irq, call disable_irq().
> > > +    *
> > > +    * In the scenario based on shared interrupts, vq will be searched from
> > > +    * the queue virtqueues. Since the previous list_del() has been deleted
> > > +    * from the queue, it is impossible for vq to be called in this case.
> > > +    * There is no need to close the corresponding interrupt.
> > > +    */
> > > +   if (vp_dev->per_vq_vectors && info->msix_vector != VIRTIO_MSI_NO_VECTOR)
> > > +           disable_irq(pci_irq_vector(vp_dev->pci_dev, info->msix_vector));
> >
> >
> > See the previous discussion and the revert of the first try to harden
> > the interrupt. We probably can't use disable_irq() since it conflicts
> > with the affinity managed IRQ that is used by some drivers.
> >
> > We need to use synchonize_irq() and per virtqueue flag instead. As
> > mentioned in previous patches, this could be done on top of my rework on
> > the IRQ hardening .
>
> OK, the next version will contain hardened features by per virtqueue flag.

Actually, I'm working on a new version of hardening. I plan to switch
to the virtqueue flag so we will be fine here if we do the resize work
on top.

I will cc you in the new version.

Thanks

>
> Thanks.
>
> >
> >
> > > +
> > > +   vq->reset = true;
> > > +
> > > +   return 0;
> > > +}
> > > +
> > > +static int vp_modern_enable_reset_vq(struct virtqueue *vq)
> > > +{
> > > +   struct virtio_pci_device *vp_dev = to_vp_device(vq->vdev);
> > > +   struct virtio_pci_modern_device *mdev = &vp_dev->mdev;
> > > +   struct virtio_pci_vq_info *info;
> > > +   unsigned long flags, index;
> > > +   int err;
> > > +
> > > +   if (!vq->reset)
> > > +           return -EBUSY;
> > > +
> > > +   index = vq->index;
> > > +   info = vp_dev->vqs[index];
> > > +
> > > +   /* check queue reset status */
> > > +   if (vp_modern_get_queue_reset(mdev, index) != 1)
> > > +           return -EBUSY;
> > > +
> > > +   err = vp_active_vq(vq, info->msix_vector);
> > > +   if (err)
> > > +           return err;
> > > +
> > > +   if (vq->callback) {
> > > +           spin_lock_irqsave(&vp_dev->lock, flags);
> > > +           list_add(&info->node, &vp_dev->virtqueues);
> > > +           spin_unlock_irqrestore(&vp_dev->lock, flags);
> > > +   } else {
> > > +           INIT_LIST_HEAD(&info->node);
> > > +   }
> > > +
> > > +   vp_modern_set_queue_enable(&vp_dev->mdev, index, true);
> > > +
> > > +   if (vp_dev->per_vq_vectors && info->msix_vector != VIRTIO_MSI_NO_VECTOR)
> > > +           enable_irq(pci_irq_vector(vp_dev->pci_dev, info->msix_vector));
> >
> >
> > We had the same issue as disable_irq().
> >
> > Thanks
> >
> >
> > > +
> > > +   vq->reset = false;
> > > +
> > > +   return 0;
> > > +}
> > > +
> > >   static u16 vp_config_vector(struct virtio_pci_device *vp_dev, u16 vector)
> > >   {
> > >     return vp_modern_config_vector(&vp_dev->mdev, vector);
> > > @@ -407,6 +487,8 @@ static const struct virtio_config_ops virtio_pci_config_nodev_ops = {
> > >     .set_vq_affinity = vp_set_vq_affinity,
> > >     .get_vq_affinity = vp_get_vq_affinity,
> > >     .get_shm_region  = vp_get_shm_region,
> > > +   .reset_vq        = vp_modern_reset_vq,
> > > +   .enable_reset_vq = vp_modern_enable_reset_vq,
> > >   };
> > >
> > >   static const struct virtio_config_ops virtio_pci_config_ops = {
> > > @@ -425,6 +507,8 @@ static const struct virtio_config_ops virtio_pci_config_ops = {
> > >     .set_vq_affinity = vp_set_vq_affinity,
> > >     .get_vq_affinity = vp_get_vq_affinity,
> > >     .get_shm_region  = vp_get_shm_region,
> > > +   .reset_vq        = vp_modern_reset_vq,
> > > +   .enable_reset_vq = vp_modern_enable_reset_vq,
> > >   };
> > >
> > >   /* the PCI probing function */
> > > diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
> > > index 6250e19fc5bf..91937e21edca 100644
> > > --- a/drivers/virtio/virtio_ring.c
> > > +++ b/drivers/virtio/virtio_ring.c
> > > @@ -2028,6 +2028,7 @@ static struct virtqueue *vring_create_virtqueue_packed(
> > >     vq->vq.vdev = vdev;
> > >     vq->vq.name = name;
> > >     vq->vq.index = index;
> > > +   vq->vq.reset = false;
> > >     vq->notify = notify;
> > >     vq->weak_barriers = weak_barriers;
> > >
> > > @@ -2508,6 +2509,7 @@ struct virtqueue *__vring_new_virtqueue(unsigned int index,
> > >     vq->vq.vdev = vdev;
> > >     vq->vq.name = name;
> > >     vq->vq.index = index;
> > > +   vq->vq.reset = false;
> > >     vq->notify = notify;
> > >     vq->weak_barriers = weak_barriers;
> > >
> > > diff --git a/include/linux/virtio.h b/include/linux/virtio.h
> > > index c86ff02e0ca0..33ab003c5100 100644
> > > --- a/include/linux/virtio.h
> > > +++ b/include/linux/virtio.h
> > > @@ -33,6 +33,7 @@ struct virtqueue {
> > >     unsigned int num_free;
> > >     unsigned int num_max;
> > >     void *priv;
> > > +   bool reset;
> > >   };
> > >
> > >   int virtqueue_add_outbuf(struct virtqueue *vq,
> >
>





[Index of Archives]     [Linux Kernel Development]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux