Re: [PATCH v7 09/26] virtio_ring: split: implement virtqueue_reset_vring_split()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 9 Mar 2022 15:55:44 +0800, Jason Wang <jasowang@xxxxxxxxxx> wrote:
>
> 在 2022/3/8 下午8:35, Xuan Zhuo 写道:
> > virtio ring supports reset.
> >
> > Queue reset is divided into several stages.
> >
> > 1. notify device queue reset
> > 2. vring release
> > 3. attach new vring
> > 4. notify device queue re-enable
> >
> > After the first step is completed, the vring reset operation can be
> > performed. If the newly set vring num does not change, then just reset
> > the vq related value.
> >
> > Otherwise, the vring will be released and the vring will be reallocated.
> > And the vring will be attached to the vq. If this process fails, the
> > function will exit, and the state of the vq will be the vring release
> > state. You can call this function again to reallocate the vring.
> >
> > In addition, vring_align, may_reduce_num are necessary for reallocating
> > vring, so they are retained when creating vq.
> >
> > Signed-off-by: Xuan Zhuo <xuanzhuo@xxxxxxxxxxxxxxxxx>
> > ---
> >   drivers/virtio/virtio_ring.c | 69 ++++++++++++++++++++++++++++++++++++
> >   1 file changed, 69 insertions(+)
> >
> > diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
> > index e0422c04c903..148fb1fd3d5a 100644
> > --- a/drivers/virtio/virtio_ring.c
> > +++ b/drivers/virtio/virtio_ring.c
> > @@ -158,6 +158,12 @@ struct vring_virtqueue {
> >   			/* DMA address and size information */
> >   			dma_addr_t queue_dma_addr;
> >   			size_t queue_size_in_bytes;
> > +
> > +			/* The parameters for creating vrings are reserved for
> > +			 * creating new vrings when enabling reset queue.
> > +			 */
> > +			u32 vring_align;
> > +			bool may_reduce_num;
> >   		} split;
> >
> >   		/* Available for packed ring */
> > @@ -217,6 +223,12 @@ struct vring_virtqueue {
> >   #endif
> >   };
> >
> > +static void vring_free(struct virtqueue *vq);
> > +static void __vring_virtqueue_init_split(struct vring_virtqueue *vq,
> > +					 struct virtio_device *vdev);
> > +static int __vring_virtqueue_attach_split(struct vring_virtqueue *vq,
> > +					  struct virtio_device *vdev,
> > +					  struct vring vring);
> >
> >   /*
> >    * Helpers.
> > @@ -1012,6 +1024,8 @@ static struct virtqueue *vring_create_virtqueue_split(
> >   		return NULL;
> >   	}
> >
> > +	to_vvq(vq)->split.vring_align = vring_align;
> > +	to_vvq(vq)->split.may_reduce_num = may_reduce_num;
> >   	to_vvq(vq)->split.queue_dma_addr = vring.dma_addr;
> >   	to_vvq(vq)->split.queue_size_in_bytes = vring.queue_size_in_bytes;
> >   	to_vvq(vq)->we_own_ring = true;
> > @@ -1019,6 +1033,59 @@ static struct virtqueue *vring_create_virtqueue_split(
> >   	return vq;
> >   }
> >
> > +static int virtqueue_reset_vring_split(struct virtqueue *_vq, u32 num)
> > +{
>
>
> So what this function does is to resize the virtqueue actually, I
> suggest to rename it as virtqueue_resize_split().

OK.

>
>
> > +	struct vring_virtqueue *vq = to_vvq(_vq);
> > +	struct virtio_device *vdev = _vq->vdev;
> > +	struct vring_split vring;
> > +	int err;
> > +
> > +	if (num > _vq->num_max)
> > +		return -E2BIG;
> > +
> > +	switch (vq->vq.reset) {
> > +	case VIRTIO_VQ_RESET_STEP_NONE:
> > +		return -ENOENT;
> > +
> > +	case VIRTIO_VQ_RESET_STEP_VRING_ATTACH:
> > +	case VIRTIO_VQ_RESET_STEP_DEVICE:
> > +		if (vq->split.vring.num == num || !num)
> > +			break;
> > +
> > +		vring_free(_vq);
> > +
> > +		fallthrough;
> > +
> > +	case VIRTIO_VQ_RESET_STEP_VRING_RELEASE:
> > +		if (!num)
> > +			num = vq->split.vring.num;
> > +
> > +		err = vring_create_vring_split(&vring, vdev,
> > +					       vq->split.vring_align,
> > +					       vq->weak_barriers,
> > +					       vq->split.may_reduce_num, num);
> > +		if (err)
> > +			return -ENOMEM;
>
>
> We'd better need a safe fallback here like:
>
> If we can't allocate new memory, we can keep using the current one.
> Otherwise an ethtool -G fail may make the device not usable.
>
> This could be done by not freeing the old vring and virtqueue states
> until new is allocated.

I've been thinking the same thing for the past two days.

>
>
> > +
> > +		err = __vring_virtqueue_attach_split(vq, vdev, vring.vring);
> > +		if (err) {
> > +			vring_free_queue(vdev, vring.queue_size_in_bytes,
> > +					 vring.queue,
> > +					 vring.dma_addr);
> > +			return -ENOMEM;
> > +		}
> > +
> > +		vq->split.queue_dma_addr = vring.dma_addr;
> > +		vq->split.queue_size_in_bytes = vring.queue_size_in_bytes;
> > +	}
> > +
> > +	__vring_virtqueue_init_split(vq, vdev);
> > +	vq->we_own_ring = true;
>
>
> This seems wrong, we have the transport (rproc/mlxtbf) that allocate the
> vring by themselves. I think we need to fail the resize for we_own_ring
> == false.

Oh, it turns out that we_own_ring is for this purpose.

Thanks.

>
> Thanks
>
>
>
> > +	vq->vq.reset = VIRTIO_VQ_RESET_STEP_VRING_ATTACH;
> > +
> > +	return 0;
> > +}
> > +
> >
> >   /*
> >    * Packed ring specific functions - *_packed().
> > @@ -2317,6 +2384,8 @@ static int __vring_virtqueue_attach_split(struct vring_virtqueue *vq,
> >   static void __vring_virtqueue_init_split(struct vring_virtqueue *vq,
> >   					 struct virtio_device *vdev)
> >   {
> > +	vq->vq.reset = VIRTIO_VQ_RESET_STEP_NONE;
> > +
> >   	vq->packed_ring = false;
> >   	vq->we_own_ring = false;
> >   	vq->broken = false;
>




[Index of Archives]     [Linux Kernel Development]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux