Hi Dan, On 2/16/22 23:52, Daniel Scally wrote: > At the moment there are a few places in the int3472-tps68470 driver that are > limited to just working with a single consuming device dependent on the PMIC. > There are systems where multiple camera sensors share a single TPS68470, so > we need to extend the driver to support them. This requires a couple of tweaks > to the ACPI functions to fetch dependent devices, which also assumes that only > a single dependent will be found. This sounds great, thank you for your work on this. I have a bit of a backlog wrt pdx86 patches to review and I try to through those in FIFO order to keep things fair, so it may be a while (approx. 1-2 weeks) before I get around to reviewing these. Regards, Hans > > Hans - this (plus a series to media [1]) adds support for the Surface Go 2's > IR camera...the regulator settings for the Go1/2/3 world facing camera are the > same, so I'd expect them to match for the IR sensor too, which means it should > enable support for your Go too. > > Thanks > Dan > > > [1] https://lore.kernel.org/linux-media/20220215230737.1870630-1-djrscally@xxxxxxxxx/ > > Daniel Scally (6): > ACPI: scan: Add acpi_dev_get_next_consumer_dev() > ACPI: bus: Add iterator for dependent devices > platform/x86: int3472: Support multiple clock consumers > platform/x86: int3472: Add terminator to gpiod_lookup_table > platform/x86: int3472: Support multiple gpio lookups in board data > platform/x86: int3472: Add board data for Surface Go2 IR camera > > drivers/acpi/scan.c | 47 +++++++++-- > drivers/clk/clk-tps68470.c | 13 +++- > drivers/platform/x86/intel/int3472/tps68470.c | 77 +++++++++++++++---- > drivers/platform/x86/intel/int3472/tps68470.h | 3 +- > .../x86/intel/int3472/tps68470_board_data.c | 58 +++++++++++++- > include/acpi/acpi_bus.h | 14 ++++ > include/linux/platform_data/tps68470.h | 7 +- > 7 files changed, 188 insertions(+), 31 deletions(-) >
