Re: [PATCH v6 2/2] platform/x86: amd-pmc: Add support for AMD Smart Trace Buffer

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On 11/30/21 12:23, Sanket Goswami wrote:
> STB (Smart Trace Buffer), is a debug trace buffer that isolates the
> failures by analyzing the last running feature of a system. This
> non-intrusive way always runs in the background and stores the trace
> into the SoC.
> 
> This patch enables the STB feature by passing module param
> "enable_stb=1" while loading the driver and provides mechanism to
> access the STB buffer using the read and write routines.
> 
> Co-developed-by: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
> Signed-off-by: Sanket Goswami <Sanket.Goswami@xxxxxxx>
> ---
> Changes in v6:
> - Capture the read data directly into buf in amd_pmc_read_stb().
> 
> Changes in v5:
> - Use kfree() only once in .open as suggested by Hans.
> 
> Changes in v4:
> - Use kzalloc() for memory allocation.
> 
> Changes in v3:
> - Use sizeof(u32) with multiplier as suggested by Mark Gross.
> 
> Changes in v2:
> - Create amd_pmc_stb_debugfs_fops structure to get STB data.
> - Address review comments from Hans.
> 
>  drivers/platform/x86/amd-pmc.c | 132 +++++++++++++++++++++++++++++++++
>  1 file changed, 132 insertions(+)
> 
> diff --git a/drivers/platform/x86/amd-pmc.c b/drivers/platform/x86/amd-pmc.c
> index b3b8a5daa02e..581cfd702082 100644
> --- a/drivers/platform/x86/amd-pmc.c
> +++ b/drivers/platform/x86/amd-pmc.c
> @@ -35,6 +35,12 @@
>  #define AMD_PMC_SCRATCH_REG_CZN		0x94
>  #define AMD_PMC_SCRATCH_REG_YC		0xD14
>  
> +/* STB Registers */
> +#define AMD_PMC_STB_INDEX_ADDRESS	0xF8
> +#define AMD_PMC_STB_INDEX_DATA		0xFC
> +#define AMD_PMC_STB_PMI_0		0x03E30600
> +#define AMD_PMC_STB_PREDEF		0xC6000001
> +
>  /* Base address of SMU for mapping physical address to virtual address */
>  #define AMD_PMC_SMU_INDEX_ADDRESS	0xB8
>  #define AMD_PMC_SMU_INDEX_DATA		0xBC
> @@ -82,6 +88,7 @@
>  #define SOC_SUBSYSTEM_IP_MAX	12
>  #define DELAY_MIN_US		2000
>  #define DELAY_MAX_US		3000
> +#define FIFO_SIZE		4096
>  enum amd_pmc_def {
>  	MSG_TEST = 0x01,
>  	MSG_OS_HINT_PCO,
> @@ -128,8 +135,14 @@ struct amd_pmc_dev {
>  #endif /* CONFIG_DEBUG_FS */
>  };
>  
> +static bool enable_stb;
> +module_param(enable_stb, bool, 0644);
> +MODULE_PARM_DESC(enable_stb, "Enable the STB debug mechanism");
> +
>  static struct amd_pmc_dev pmc;
>  static int amd_pmc_send_cmd(struct amd_pmc_dev *dev, u32 arg, u32 *data, u8 msg, bool ret);
> +static int amd_pmc_write_stb(struct amd_pmc_dev *dev, u32 data);
> +static int amd_pmc_read_stb(struct amd_pmc_dev *dev, u32 *buf);
>  
>  static inline u32 amd_pmc_reg_read(struct amd_pmc_dev *dev, int reg_offset)
>  {
> @@ -176,6 +189,50 @@ static int amd_pmc_get_smu_version(struct amd_pmc_dev *dev)
>  	return 0;
>  }
>  
> +static int amd_pmc_stb_debugfs_open(struct inode *inode, struct file *filp)
> +{
> +	struct amd_pmc_dev *dev = filp->f_inode->i_private;
> +	u32 size = FIFO_SIZE * sizeof(u32);
> +	u32 *buf;
> +	int rc;
> +
> +	buf = kzalloc(size, GFP_KERNEL);
> +	if (!buf)
> +		return -ENOMEM;
> +
> +	rc = amd_pmc_read_stb(dev, buf);
> +	if (rc) {
> +		kfree(buf);
> +		return rc;
> +	}
> +
> +	filp->private_data = buf;
> +	return rc;
> +}
> +
> +static ssize_t amd_pmc_stb_debugfs_read(struct file *filp, char __user *buf, size_t size,
> +					loff_t *pos)
> +{
> +	if (!filp->private_data)
> +		return -EINVAL;
> +
> +	return simple_read_from_buffer(buf, size, pos, filp->private_data,
> +				       FIFO_SIZE * sizeof(u32));
> +}
> +
> +static int amd_pmc_stb_debugfs_release(struct inode *inode, struct file *filp)
> +{
> +	kfree(filp->private_data);
> +	return 0;
> +}
> +
> +const struct file_operations amd_pmc_stb_debugfs_fops = {
> +	.owner = THIS_MODULE,
> +	.open = amd_pmc_stb_debugfs_open,
> +	.read = amd_pmc_stb_debugfs_read,
> +	.release = amd_pmc_stb_debugfs_release,
> +};
> +
>  static int amd_pmc_idlemask_read(struct amd_pmc_dev *pdev, struct device *dev,
>  				 struct seq_file *s)
>  {
> @@ -289,6 +346,10 @@ static void amd_pmc_dbgfs_register(struct amd_pmc_dev *dev)
>  			    &s0ix_stats_fops);
>  	debugfs_create_file("amd_pmc_idlemask", 0644, dev->dbgfs_dir, dev,
>  			    &amd_pmc_idlemask_fops);
> +	/* Enable STB only when the module_param is set */
> +	if (enable_stb)
> +		debugfs_create_file("stb_read", 0644, dev->dbgfs_dir, dev,
> +				    &amd_pmc_stb_debugfs_fops);
>  }
>  #else
>  static inline void amd_pmc_dbgfs_register(struct amd_pmc_dev *dev)
> @@ -485,6 +546,13 @@ static int __maybe_unused amd_pmc_suspend(struct device *dev)
>  	if (rc)
>  		dev_err(pdev->dev, "suspend failed\n");
>  
> +	if (enable_stb)
> +		rc = amd_pmc_write_stb(pdev, AMD_PMC_STB_PREDEF);
> +	if (rc)	{
> +		dev_err(pdev->dev, "error writing to STB\n");
> +		return rc;
> +	}
> +
>  	return rc;
>  }
>  
> @@ -505,6 +573,14 @@ static int __maybe_unused amd_pmc_resume(struct device *dev)
>  	/* Dump the IdleMask to see the blockers */
>  	amd_pmc_idlemask_read(pdev, dev, NULL);
>  
> +	/* Write data incremented by 1 to distinguish in stb_read */
> +	if (enable_stb)
> +		rc = amd_pmc_write_stb(pdev, AMD_PMC_STB_PREDEF + 1);
> +	if (rc)	{
> +		dev_err(pdev->dev, "error writing to STB\n");
> +		return rc;
> +	}
> +
>  	return 0;
>  }
>  
> @@ -521,6 +597,62 @@ static const struct pci_device_id pmc_pci_ids[] = {
>  	{ }
>  };
>  
> +static int amd_pmc_write_stb(struct amd_pmc_dev *dev, u32 data)
> +{
> +	int err;
> +
> +	err = pci_write_config_dword(dev->rdev, AMD_PMC_STB_INDEX_ADDRESS, AMD_PMC_STB_PMI_0);
> +	if (err) {
> +		dev_err(dev->dev, "failed to write addr in stb: 0x%X\n",
> +			AMD_PMC_STB_INDEX_ADDRESS);
> +		err = pcibios_err_to_errno(err);
> +		goto err_pci_dev_put;

Since the code now no longer gets the rdev on-demand here, but instead uses
the rdev reference storied in dev->rdev, it should not call pci_put_dev here,
instead it should do:

		return pcibios_err_to_errno(err)

I've fixed this; and the 3 similar cases below (2 in amd_pmc_read_stb(); while
merging this series:


Thank you for your patch-series, I've applied the series to my
review-hans branch:
https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git/log/?h=review-hans

Note it will show up in my review-hans branch once I've pushed my
local branch there, which might take a while.

Once I've run some tests on this branch the patches there will be
added to the platform-drivers-x86/for-next branch and eventually
will be included in the pdx86 pull-request to Linus for the next
merge-window.

Regards,

Hans



> +	}
> +
> +	err = pci_write_config_dword(dev->rdev, AMD_PMC_STB_INDEX_DATA, data);
> +	if (err) {
> +		dev_err(dev->dev, "failed to write data in stb: 0x%X\n",
> +			AMD_PMC_STB_INDEX_DATA);
> +		err = pcibios_err_to_errno(err);
> +		goto err_pci_dev_put;
> +	}
> +
> +	return 0;
> +
> +err_pci_dev_put:
> +	pci_dev_put(dev->rdev);
> +	return err;
> +}
> +
> +static int amd_pmc_read_stb(struct amd_pmc_dev *dev, u32 *buf)
> +{
> +	int i, err;
> +
> +	err = pci_write_config_dword(dev->rdev, AMD_PMC_STB_INDEX_ADDRESS, AMD_PMC_STB_PMI_0);
> +	if (err) {
> +		dev_err(dev->dev, "error writing addr to stb: 0x%X\n",
> +			AMD_PMC_STB_INDEX_ADDRESS);
> +		err = pcibios_err_to_errno(err);
> +		goto err_pci_dev_put;
> +	}
> +
> +	for (i = 0; i < FIFO_SIZE; i++) {
> +		err = pci_read_config_dword(dev->rdev, AMD_PMC_STB_INDEX_DATA, buf++);
> +		if (err) {
> +			dev_err(dev->dev, "error reading data from stb: 0x%X\n",
> +				AMD_PMC_STB_INDEX_DATA);
> +			err = pcibios_err_to_errno(err);
> +			goto err_pci_dev_put;
> +		}
> +	}
> +
> +	return 0;
> +
> +err_pci_dev_put:
> +	pci_dev_put(dev->rdev);
> +	return err;
> +}
> +
>  static int amd_pmc_probe(struct platform_device *pdev)
>  {
>  	struct amd_pmc_dev *dev = &pmc;
> 




[Index of Archives]     [Linux Kernel Development]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux