https://bugzilla.kernel.org/show_bug.cgi?id=204807 --- Comment #200 from Vladdrako (vladdrako007@xxxxxxxxx) --- (In reply to Denis Pauk from comment #199) > Could check with updated patch? Works fine. sudo dmesg | grep wmi [ 7.943237] asus_wmi: ASUS WMI generic driver loaded [ 8.052769] asus_wmi: Initialization: 0x0 [ 8.052805] asus_wmi: BIOS WMI version: 0.9 [ 8.052863] asus_wmi: SFUN value: 0x0 [ 8.052866] eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS [ 8.053621] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input13 sudo dmesg | grep nct6775 [ 8.074613] nct6775: Can't read chip ID by Asus WMI. [ 8.074982] nct6775: Using Asus WMI mutex: \_SB_.PCI0.LPCB.SIO1.MUT0 [ 8.075014] nct6775: Found NCT6776D/F or compatible chip at 0x2e:0x290 [ 8.075056] nct6775: i2c have not found sensors coretemp-isa-0000 Adapter: ISA adapter Package id 0: +37.0°C (high = +80.0°C, crit = +99.0°C) Core 0: +37.0°C (high = +80.0°C, crit = +99.0°C) Core 1: +36.0°C (high = +80.0°C, crit = +99.0°C) Core 2: +37.0°C (high = +80.0°C, crit = +99.0°C) Core 3: +31.0°C (high = +80.0°C, crit = +99.0°C) acpitz-acpi-0 Adapter: ACPI interface temp1: +27.8°C (crit = +105.0°C) temp2: +29.8°C (crit = +105.0°C) nct6776-isa-0290 Adapter: ISA adapter Vcore: 944.00 mV (min = +0.00 V, max = +1.74 V) in1: 1.02 V (min = +0.00 V, max = +0.00 V) ALARM AVCC: 3.41 V (min = +2.98 V, max = +3.63 V) +3.3V: 3.41 V (min = +2.98 V, max = +3.63 V) in4: 1.02 V (min = +0.00 V, max = +0.00 V) ALARM in5: 2.04 V (min = +0.00 V, max = +0.00 V) ALARM in6: 832.00 mV (min = +0.00 V, max = +0.00 V) ALARM 3VSB: 3.42 V (min = +2.98 V, max = +3.63 V) Vbat: 3.38 V (min = +2.70 V, max = +3.63 V) fan1: 0 RPM (min = 0 RPM) fan2: 856 RPM (min = 0 RPM) fan3: 0 RPM (min = 0 RPM) fan4: 0 RPM (min = 0 RPM) fan5: 0 RPM (min = 0 RPM) SYSTIN: +27.0°C (high = +0.0°C, hyst = +0.0°C) ALARM sensor = thermistor CPUTIN: +91.5°C (high = +81.0°C, hyst = +76.0°C) ALARM sensor = thermistor AUXTIN: +64.5°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor PECI Agent 0: +36.0°C (high = +80.0°C, hyst = +75.0°C) (crit = +99.0°C) PCH_CHIP_TEMP: +0.0°C PCH_CPU_TEMP: +0.0°C PCH_MCH_TEMP: +0.0°C intrusion0: ALARM intrusion1: ALARM beep_enable: disabled nvme-pci-0200 Adapter: PCI adapter Composite: +25.9°C (low = -0.1°C, high = +69.8°C) (crit = +84.8°C) ERROR: Can't get value of subfeature temp2_min: I/O error ERROR: Can't get value of subfeature temp2_max: I/O error Sensor 1: +37.9°C (low = +0.0°C, high = +0.0°C) -- You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
