https://bugzilla.kernel.org/show_bug.cgi?id=204807 --- Comment #198 from Vladdrako (vladdrako007@xxxxxxxxx) --- @Denis Pauk Fixed by replacing DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "ASUSTeK COMPUTER INC."), \ -> "ASUSTeK Computer INC." sudo dmidecode -t 2 # dmidecode 3.3 Getting SMBIOS data from sysfs. SMBIOS 2.6 present. Handle 0x0002, DMI type 2, 15 bytes Base Board Information Manufacturer: ASUSTeK Computer INC. Product Name: P8Z68-V LX Version: Rev X.0x Serial Number: MB-1234567890 Asset Tag: To be filled by O.E.M. Features: Board is a hosting board Board is replaceable Location In Chassis: To be filled by O.E.M. Chassis Handle: 0x0003 Type: Motherboard Contained Object Handles: 0 sudo dmesg | grep ACPI [sudo] пароль для vladdrako: [ 0.000000] ACPI: OSL: Static SSDT installation disabled [ 0.000000] BIOS-e820: [mem 0x00000000ce941000-0x00000000ceb94fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000ceb95000-0x00000000ceba1fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000ceba2000-0x00000000cebc0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cebc1000-0x00000000cebc5fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000cebc6000-0x00000000cec08fff] ACPI NVS [ 0.000000] efi: ACPI=0xceb95000 ACPI 2.0=0xceb95000 SMBIOS=0xce425f98 [ 0.012426] ACPI: SSDT ACPI table found in initrd [kernel/firmware/acpi/ssdt1.aml][0x414] [ 0.012430] ACPI: SSDT ACPI table found in initrd [kernel/firmware/acpi/ssdt2.aml][0xb05] [ 0.012432] ACPI: SSDT ACPI table found in initrd [kernel/firmware/acpi/ssdt3.aml][0x2f4] [ 0.012434] ACPI: SSDT ACPI table found in initrd [kernel/firmware/acpi/ssdt4.aml][0x87b] [ 0.012436] ACPI: SSDT ACPI table found in initrd [kernel/firmware/acpi/ssdt5.aml][0x3aa] [ 0.012438] ACPI: SSDT ACPI table found in initrd [kernel/firmware/acpi/ssdt6.aml][0x18a] [ 0.012439] ACPI: SSDT ACPI table found in initrd [kernel/firmware/acpi/ssdt7.aml][0x18a] [ 0.012460] modified: [mem 0x00000000ce14e000-0x00000000ce150145] ACPI data [ 0.012470] modified: [mem 0x00000000ce941000-0x00000000ceb94fff] ACPI NVS [ 0.012472] modified: [mem 0x00000000ceb95000-0x00000000ceba1fff] ACPI data [ 0.012473] modified: [mem 0x00000000ceba2000-0x00000000cebc0fff] ACPI NVS [ 0.012475] modified: [mem 0x00000000cebc1000-0x00000000cebc5fff] ACPI data [ 0.012476] modified: [mem 0x00000000cebc6000-0x00000000cec08fff] ACPI NVS [ 0.012497] ACPI: Early table checksum verification disabled [ 0.012500] ACPI: RSDP 0x00000000CEB95000 000024 (v02 ALASKA) [ 0.012503] ACPI: XSDT 0x00000000CEB95078 00006C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.012512] ACPI: FACP 0x00000000CEB9F930 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013) [ 0.012520] ACPI: DSDT 0x00000000CEB95180 00A7B0 (v02 ALASKA A M I 00000015 INTL 20051117) [ 0.012525] ACPI: FACS 0x00000000CEBBFF80 000040 [ 0.012530] ACPI: APIC 0x00000000CEB9FA28 000072 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.012536] ACPI: MCFG 0x00000000CEB9FAA0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.012541] ACPI: HPET 0x00000000CEB9FAE0 000038 (v01 ALASKA A M I 01072009 AMI. 00000005) [ 0.012544] ACPI: Ignoring installation of SSDT at 00000000CEB9FB18 [ 0.012546] ACPI: Ignoring installation of SSDT at 00000000CEB9FE88 [ 0.012548] ACPI: Ignoring installation of SSDT at 00000000CEBA0838 [ 0.012553] ACPI: DMAR 0x00000000CEBA12D0 0000A8 (v01 INTEL SNB 00000001 INTL 00000001) [ 0.012558] ACPI: BGRT 0x00000000CEBA13D0 000038 (v00 ALASKA A M I 01072009 AMI 00010013) [ 0.012561] ACPI: Reserving FACP table memory at [mem 0xceb9f930-0xceb9fa23] [ 0.012562] ACPI: Reserving DSDT table memory at [mem 0xceb95180-0xceb9f92f] [ 0.012563] ACPI: Reserving FACS table memory at [mem 0xcebbff80-0xcebbffbf] [ 0.012564] ACPI: Reserving APIC table memory at [mem 0xceb9fa28-0xceb9fa99] [ 0.012565] ACPI: Reserving MCFG table memory at [mem 0xceb9faa0-0xceb9fadb] [ 0.012566] ACPI: Reserving HPET table memory at [mem 0xceb9fae0-0xceb9fb17] [ 0.012567] ACPI: Reserving DMAR table memory at [mem 0xceba12d0-0xceba1377] [ 0.012568] ACPI: Reserving BGRT table memory at [mem 0xceba13d0-0xceba1407] [ 0.012572] ACPI: Table Upgrade: install [SSDT- PmRef- Cpu0Ist] [ 0.012574] ACPI: Ignoring installation of SSDT at 00000000CE14E000 [ 0.012576] ACPI: Table Upgrade: install [SSDT- PmRef- CpuPm] [ 0.012577] ACPI: Ignoring installation of SSDT at 00000000CE14E414 [ 0.012579] ACPI: Table Upgrade: install [SSDT-SataRe-SataTabl] [ 0.012581] ACPI: Ignoring installation of SSDT at 00000000CE14EF19 [ 0.012582] ACPI: Table Upgrade: install [SSDT- PmRef- Cpu0Cst] [ 0.012584] ACPI: Ignoring installation of SSDT at 00000000CE14F20D [ 0.012585] ACPI: Table Upgrade: install [SSDT- PmRef- ApIst] [ 0.012587] ACPI: Ignoring installation of SSDT at 00000000CE14FA88 [ 0.012589] ACPI: Table Upgrade: install [SSDT- PmRef- ApCst] [ 0.012590] ACPI: Ignoring installation of SSDT at 00000000CE14FE32 [ 0.012592] ACPI: Table Upgrade: install [SSDT- PmRef- ApCst] [ 0.012593] ACPI: Ignoring installation of SSDT at 00000000CE14FFBC [ 0.042572] ACPI: PM-Timer IO Port: 0x408 [ 0.042580] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.042594] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.042595] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.042599] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.042600] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.122119] ACPI: Core revision 20210730 [ 0.166568] ACPI: PM: Registering ACPI NVS region [mem 0xce941000-0xceb94fff] (2441216 bytes) [ 0.166568] ACPI: PM: Registering ACPI NVS region [mem 0xceba2000-0xcebc0fff] (126976 bytes) [ 0.166568] ACPI: PM: Registering ACPI NVS region [mem 0xcebc6000-0xcec08fff] (274432 bytes) [ 0.166581] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.166581] ACPI: bus type PCI registered [ 0.166581] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.169728] ACPI: Added _OSI(Module Device) [ 0.169728] ACPI: Added _OSI(Processor Device) [ 0.169728] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.169728] ACPI: Added _OSI(Processor Aggregator Device) [ 0.169728] ACPI: Added _OSI(Linux-Dell-Video) [ 0.169728] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.169728] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.177081] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.178274] ACPI: EC: EC started [ 0.178275] ACPI: EC: interrupt blocked [ 0.178279] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.178281] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions [ 0.178283] ACPI: Interpreter enabled [ 0.178298] ACPI: PM: (supports S0 S5) [ 0.178299] ACPI: Using IOAPIC for interrupt routing [ 0.178330] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.178545] ACPI: Enabled 10 GPEs in block 00 to 3F [ 0.185721] ACPI: PM: Power Resource [FN00] [ 0.185797] ACPI: PM: Power Resource [FN01] [ 0.185874] ACPI: PM: Power Resource [FN02] [ 0.185948] ACPI: PM: Power Resource [FN03] [ 0.186023] ACPI: PM: Power Resource [FN04] [ 0.186715] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.193940] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.194009] ACPI: PCI: Interrupt link LNKB configured for IRQ 3 [ 0.194076] ACPI: PCI: Interrupt link LNKC configured for IRQ 4 [ 0.194143] ACPI: PCI: Interrupt link LNKD configured for IRQ 5 [ 0.194209] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.194210] ACPI: PCI: Interrupt link LNKE disabled [ 0.194276] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.194342] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.194343] ACPI: PCI: Interrupt link LNKG disabled [ 0.194409] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.194710] ACPI: EC: interrupt unblocked [ 0.194711] ACPI: EC: event unblocked [ 0.194716] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.194717] ACPI: EC: GPE=0x18 [ 0.194719] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC initialization complete [ 0.194720] ACPI: \_SB_.PCI0.LPCB.EC0_: EC: Used to handle transactions and events [ 0.194782] ACPI: bus type USB registered [ 0.194782] PCI: Using ACPI for IRQ routing [ 0.207295] pnp: PnP ACPI init [ 0.208360] pnp: PnP ACPI: found 8 devices [ 0.378928] ACPI: button: Power Button [PWRB] [ 0.379132] ACPI: button: Power Button [PWRF] [ 0.379837] ACPI: thermal: Thermal Zone [TZ00] (28 C) [ 0.380112] ACPI: thermal: Thermal Zone [TZ01] (30 C) [ 5.069363] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20210730/utaddress-204) [ 5.069371] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 5.069374] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20210730/utaddress-204) [ 5.069377] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 5.069378] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20210730/utaddress-204) [ 5.069381] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 5.069382] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000050F (\_GPE.GPIO) (20210730/utaddress-204) [ 5.069384] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20210730/utaddress-204) [ 5.069386] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 11.270149] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) sudo dmesg | grep nct6775 [ 6.082896] nct6775: Can't read chip ID by Asus WMI. [ 6.083246] nct6775: Using Asus WMI mutex: \_SB_.PCI0.LPCB.SIO1.MUT0 [ 6.083277] nct6775: Found NCT6776D/F or compatible chip at 0x2e:0x290 [ 6.083315] nct6775: i2c have not found sensors ✔ coretemp-isa-0000 Adapter: ISA adapter Package id 0: +38.0°C (high = +80.0°C, crit = +99.0°C) Core 0: +38.0°C (high = +80.0°C, crit = +99.0°C) Core 1: +37.0°C (high = +80.0°C, crit = +99.0°C) Core 2: +37.0°C (high = +80.0°C, crit = +99.0°C) Core 3: +31.0°C (high = +80.0°C, crit = +99.0°C) nct6776-isa-0290 Adapter: ISA adapter Vcore: 944.00 mV (min = +0.00 V, max = +1.74 V) in1: 1.02 V (min = +0.00 V, max = +0.00 V) ALARM AVCC: 3.41 V (min = +2.98 V, max = +3.63 V) +3.3V: 3.41 V (min = +2.98 V, max = +3.63 V) in4: 1.02 V (min = +0.00 V, max = +0.00 V) ALARM in5: 2.04 V (min = +0.00 V, max = +0.00 V) ALARM in6: 824.00 mV (min = +0.00 V, max = +0.00 V) ALARM 3VSB: 3.41 V (min = +2.98 V, max = +3.63 V) Vbat: 3.38 V (min = +2.70 V, max = +3.63 V) fan1: 0 RPM (min = 0 RPM) fan2: 853 RPM (min = 0 RPM) fan3: 0 RPM (min = 0 RPM) fan4: 0 RPM (min = 0 RPM) fan5: 0 RPM (min = 0 RPM) SYSTIN: +26.0°C (high = +0.0°C, hyst = +0.0°C) ALARM sensor = thermistor CPUTIN: +91.0°C (high = +81.0°C, hyst = +76.0°C) sensor = thermistor AUXTIN: +63.5°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor PECI Agent 0: +36.0°C (high = +80.0°C, hyst = +75.0°C) (crit = +99.0°C) PCH_CHIP_TEMP: +0.0°C PCH_CPU_TEMP: +0.0°C PCH_MCH_TEMP: +0.0°C intrusion0: ALARM intrusion1: ALARM beep_enable: disabled acpitz-acpi-0 Adapter: ACPI interface temp1: +27.8°C (crit = +105.0°C) temp2: +29.8°C (crit = +105.0°C) nvme-pci-0200 Adapter: PCI adapter Composite: +25.9°C (low = -0.1°C, high = +69.8°C) (crit = +84.8°C) ERROR: Can't get value of subfeature temp2_min: I/O error ERROR: Can't get value of subfeature temp2_max: I/O error Sensor 1: +35.9°C (low = +0.0°C, high = +0.0°C) Now works as expected. Thanks for your work! Sadly, nobody wants to fix conflicts with lpc_ich/gpio_ich drivers, so I will blacklist them :) -- You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.