https://bugzilla.kernel.org/show_bug.cgi?id=204807 --- Comment #190 from Mikhail (mikhail.v.gavrilov@xxxxxxxxx) --- Created attachment 299921 --> https://bugzilla.kernel.org/attachment.cgi?id=299921&action=edit Photo of FANs indication in BIOS (ROG STRIX X570-I GAMING) ( (In reply to Denis Pauk from comment #186) > Patch is based on stable v5.15 kernel version. Could you check with v5.15 > kernel version from kernel.org. Thanks, I beginning see CPU FAN RPM. $ sensors iwlwifi_1-virtual-0 Adapter: Virtual device temp1: +55.0°C amdgpu-pci-0b00 Adapter: PCI adapter vddgfx: 775.00 mV fan1: 0 RPM (min = 0 RPM, max = 3300 RPM) edge: +52.0°C (crit = +100.0°C, hyst = -273.1°C) (emerg = +105.0°C) junction: +54.0°C (crit = +110.0°C, hyst = -273.1°C) (emerg = +115.0°C) mem: +56.0°C (crit = +100.0°C, hyst = -273.1°C) (emerg = +105.0°C) power1: 15.00 W (cap = 255.00 W) nvme-pci-0100 Adapter: PCI adapter Composite: +52.9°C hidpp_battery_0-hid-3-9 Adapter: HID adapter in0: 4.06 V nct6798-isa-0290 Adapter: ISA adapter in0: 976.00 mV (min = +0.00 V, max = +1.74 V) in1: 1000.00 mV (min = +0.00 V, max = +0.00 V) ALARM in2: 3.41 V (min = +0.00 V, max = +0.00 V) ALARM in3: 3.36 V (min = +0.00 V, max = +0.00 V) ALARM in4: 992.00 mV (min = +0.00 V, max = +0.00 V) ALARM in5: 656.00 mV (min = +0.00 V, max = +0.00 V) ALARM in6: 424.00 mV (min = +0.00 V, max = +0.00 V) ALARM in7: 3.41 V (min = +0.00 V, max = +0.00 V) ALARM in8: 3.36 V (min = +0.00 V, max = +0.00 V) ALARM in9: 912.00 mV (min = +0.00 V, max = +0.00 V) ALARM in10: 328.00 mV (min = +0.00 V, max = +0.00 V) ALARM in11: 544.00 mV (min = +0.00 V, max = +0.00 V) ALARM in12: 1.04 V (min = +0.00 V, max = +0.00 V) ALARM in13: 464.00 mV (min = +0.00 V, max = +0.00 V) ALARM in14: 368.00 mV (min = +0.00 V, max = +0.00 V) ALARM fan1: 0 RPM (min = 0 RPM) fan2: 847 RPM (min = 0 RPM) fan5: 0 RPM (min = 0 RPM) fan7: 0 RPM (min = 0 RPM) SYSTIN: +46.0°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor CPUTIN: +48.5°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor AUXTIN0: +66.5°C sensor = thermistor AUXTIN1: +46.0°C sensor = thermistor AUXTIN2: +21.0°C sensor = thermistor AUXTIN3: +67.0°C sensor = thermistor PECI Agent 0 Calibration: +53.0°C PCH_CHIP_CPU_MAX_TEMP: +0.0°C PCH_CHIP_TEMP: +0.0°C PCH_CPU_TEMP: +0.0°C intrusion0: ALARM intrusion1: ALARM beep_enable: disabled k10temp-pci-00c3 Adapter: PCI adapter Tctl: +63.4°C Tccd1: +53.8°C Tccd2: +48.0°C ucsi_source_psy_0_00081-i2c-0-08 Adapter: Synopsys DesignWare I2C adapter in0: 0.00 V (min = +0.00 V, max = +0.00 V) curr1: 0.00 A (max = +0.00 A) For unknown reason RPM of PCH FAN and RPM of HS FAN which displayed in BIOS didn't reading by driver. It's normal? -- You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.