Re: [PATCH v4 14/20] mfd: intel_soc_pmic_chtwc: Add cht_wc_model data to struct intel_soc_pmic

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Dec 6, 2021 at 11:35 AM Hans de Goede <hdegoede@xxxxxxxxxx> wrote:
>
> Tablet / laptop designs using an Intel Cherry Trail x86 main SoC with
> an Intel Whiskey Cove PMIC do not use a single standard setup for
> the charger, fuel-gauge and other chips surrounding the PMIC /
> charging+data USB port.
>
> Unlike what is normal on x86 this diversity in designs is not handled
> by the ACPI tables. On 2 of the 3 known designs there are no standard
> (PNP0C0A) ACPI battery devices and on the 3th design the ACPI battery
> device does not work under Linux due to it requiring non-standard
> and undocumented ACPI behavior.
>
> So to make things work under Linux we use native charger and fuel-gauge
> drivers on these devices, re-using the native drivers used on ARM boards
> with the same charger / fuel-gauge ICs.
>
> This requires various MFD-cell drivers for the CHT-WC PMIC cells to
> know which model they are exactly running on so that they can e.g.
> instantiate an I2C-client for the right model charger-IC (the charger
> is connected to an I2C-controller which is part of the PMIC).
>
> Rather then duplicating DMI-id matching to check which model we are
> running on in each MFD-cell driver, add a check for this to the
> shared drivers/mfd/intel_soc_pmic_chtwc.c code by using a
> DMI table for all 3 known models:
>
> 1. The GPD Win and GPD Pocket mini-laptops, these are really 2 models
> but the Pocket re-uses the GPD Win's design in a different housing:
>
> The WC PMIC is connected to a TI BQ24292i charger, paired with
> a Maxim MAX17047 fuelgauge + a FUSB302 USB Type-C Controller +
> a PI3USB30532 USB switch, for a fully functional Type-C port.
>
> 2. The Xiaomi Mi Pad 2:
>
> The WC PMIC is connected to a TI BQ25890 charger, paired with
> a TI BQ27520 fuelgauge, using the TI BQ25890 for BC1.2 charger type
> detection, for a USB-2 only Type-C port without PD.
>
> 3. The Lenovo Yoga Book YB1-X90 / Lenovo Yoga Book YB1-X91 series:
>
> The WC PMIC is connected to a TI BQ25892 charger, paired with
> a TI BQ27542 fuelgauge, using the WC PMIC for BC1.2 charger type
> detection and using the BQ25892's Mediatek Pump Express+ (1.0)
> support to enable charging with up to 12V through a micro-USB port.

...

> +enum intel_cht_wc_models {
> +       INTEL_CHT_WC_UNKNOWN,
> +       INTEL_CHT_WC_GPD_WIN_POCKET,
> +       INTEL_CHT_WC_XIAOMI_MIPAD2,
> +       INTEL_CHT_WC_LENOVO_YOGABOOK1,
> +};

...

> +       enum intel_cht_wc_models cht_wc_model;

I'm wondering what will you do when something similar will be needed
for another PMIC?

I see possible solutions to eliminate additional churn:
- make just one enum for all models (can be done now, can be renamed later)
- make a union if we have such situation

because I wouldn't like to have another field for each possible
variant of PMIC in the generic structure.

Hence the question, does it make sense to just name it (enum and
member) less cht_wc oriented?

-- 
With Best Regards,
Andy Shevchenko



[Index of Archives]     [Linux Kernel Development]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux