The bq25890_charger code supports enabling/disabling the boost converter based on usb-phy notifications. But the usb-phy framework is not used on all boards/platforms. At support for registering the Vbus boost converter as a standard regulator when there is no usb-phy on the board. Also add support for providing regulator_init_data through platform_data for use on boards where device-tree is not used and the platform code must thus provide the regulator_init_data. Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> --- Changes in v2: - When the usb-phy framework is not used, turn off the Vboost regulator on shutdown - Some minor code-tweaks based on Andy's review --- drivers/power/supply/bq25890_charger.c | 80 ++++++++++++++++++++++++++ include/linux/power/bq25890_charger.h | 15 +++++ 2 files changed, 95 insertions(+) create mode 100644 include/linux/power/bq25890_charger.h diff --git a/drivers/power/supply/bq25890_charger.c b/drivers/power/supply/bq25890_charger.c index 162bffb02410..637cdd3b6b11 100644 --- a/drivers/power/supply/bq25890_charger.c +++ b/drivers/power/supply/bq25890_charger.c @@ -8,7 +8,9 @@ #include <linux/module.h> #include <linux/i2c.h> #include <linux/power_supply.h> +#include <linux/power/bq25890_charger.h> #include <linux/regmap.h> +#include <linux/regulator/driver.h> #include <linux/types.h> #include <linux/gpio/consumer.h> #include <linux/interrupt.h> @@ -876,6 +878,45 @@ static int bq25890_usb_notifier(struct notifier_block *nb, unsigned long val, return NOTIFY_OK; } +#ifdef CONFIG_REGULATOR +static int bq25890_vbus_enable(struct regulator_dev *rdev) +{ + struct bq25890_device *bq = rdev_get_drvdata(rdev); + + return bq25890_set_otg_cfg(bq, 1); +} + +static int bq25890_vbus_disable(struct regulator_dev *rdev) +{ + struct bq25890_device *bq = rdev_get_drvdata(rdev); + + return bq25890_set_otg_cfg(bq, 0); +} + +static int bq25890_vbus_is_enabled(struct regulator_dev *rdev) +{ + struct bq25890_device *bq = rdev_get_drvdata(rdev); + + return bq25890_field_read(bq, F_OTG_CFG); +} + +static const struct regulator_ops bq25890_vbus_ops = { + .enable = bq25890_vbus_enable, + .disable = bq25890_vbus_disable, + .is_enabled = bq25890_vbus_is_enabled, +}; + +static const struct regulator_desc bq25890_vbus_desc = { + .name = "usb_otg_vbus", + .of_match = "usb-otg-vbus", + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + .ops = &bq25890_vbus_ops, + .fixed_uV = 5000000, + .n_voltages = 1, +}; +#endif + static int bq25890_get_chip_version(struct bq25890_device *bq) { int id, rev; @@ -1075,6 +1116,22 @@ static int bq25890_probe(struct i2c_client *client, bq->usb_nb.notifier_call = bq25890_usb_notifier; usb_register_notifier(bq->usb_phy, &bq->usb_nb); } +#ifdef CONFIG_REGULATOR + else { + struct bq25890_platform_data *pdata = dev_get_platdata(dev); + struct regulator_config cfg = { }; + struct regulator_dev *reg; + + cfg.dev = dev; + cfg.driver_data = bq; + if (pdata) + cfg.init_data = pdata->regulator_init_data; + + reg = devm_regulator_register(dev, &bq25890_vbus_desc, &cfg); + if (IS_ERR(reg)) + return dev_err_probe(dev, PTR_ERR(reg), "registering regulator"); + } +#endif ret = bq25890_power_supply_init(bq); if (ret < 0) { @@ -1113,6 +1170,28 @@ static int bq25890_remove(struct i2c_client *client) return 0; } +static void bq25890_shutdown(struct i2c_client *client) +{ + struct bq25890_device *bq = i2c_get_clientdata(client); + + /* + * TODO this if + return should probably be removed, but that would + * introduce a function change for boards using the usb-phy framework. + * This needs to be tested on such a board before making this change. + */ + if (!IS_ERR_OR_NULL(bq->usb_phy)) + return; + + /* + * Turn off the 5v Boost regulator which outputs Vbus to the device's + * Micro-USB or Type-C USB port. Leaving this on drains power and + * this avoids the PMIC on some device-models seeing this as Vbus + * getting inserted after shutdown, causing the device to immediately + * power-up again. + */ + bq25890_set_otg_cfg(bq, 0); +} + #ifdef CONFIG_PM_SLEEP static int bq25890_suspend(struct device *dev) { @@ -1192,6 +1271,7 @@ static struct i2c_driver bq25890_driver = { }, .probe = bq25890_probe, .remove = bq25890_remove, + .shutdown = bq25890_shutdown, .id_table = bq25890_i2c_ids, }; module_i2c_driver(bq25890_driver); diff --git a/include/linux/power/bq25890_charger.h b/include/linux/power/bq25890_charger.h new file mode 100644 index 000000000000..c706ddb77a08 --- /dev/null +++ b/include/linux/power/bq25890_charger.h @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Platform data for the TI bq25890 battery charger driver. + */ + +#ifndef _BQ25890_CHARGER_H_ +#define _BQ25890_CHARGER_H_ + +struct regulator_init_data; + +struct bq25890_platform_data { + const struct regulator_init_data *regulator_init_data; +}; + +#endif -- 2.33.1