Hi Mark,
On 11/17/21 19:44, Mark Pearson wrote:
> Implement Opcode support.
> This is available on ThinkCenter and ThinkStations platforms and
> gives improved password setting capabilities
>
> Add options to configure System, HDD & NVMe passwords.
> HDD & NVMe passwords need a user level (user/master) along with
> drive index.
>
> Signed-off-by: Mark Pearson <markpearson@xxxxxxxxxx>
> ---
> Changes in v2:
> - Rebased to latest
> - Fixed kobject_init implementation for system-mgmt and drive roles
> - Added is_visible support for level and index attributes
Thank you.
I noticed one small issue, where tlmi_priv.pwd_admin would get
free-ed twice on a goto fail_free_pwd_admin.
I've squashed in the following fix to fix this:
--- a/drivers/platform/x86/think-lmi.c
+++ b/drivers/platform/x86/think-lmi.c
@@ -1152,7 +1152,7 @@ static int tlmi_analyze(void)
tlmi_priv.pwd_power = tlmi_create_auth("pop", "power-on");
if (!tlmi_priv.pwd_power) {
ret = -ENOMEM;
- goto fail_free_pwd_admin;
+ goto fail_clear_attr;
}
if (tlmi_priv.pwdcfg.core.password_state & TLMI_POP_PWD)
tlmi_priv.pwd_power->valid = true;
@@ -1204,8 +1204,6 @@ static int tlmi_analyze(void)
}
return 0;
-fail_free_pwd_admin:
- kfree(tlmi_priv.pwd_admin);
fail_clear_attr:
for (i = 0; i < TLMI_SETTINGS_COUNT; ++i) {
if (tlmi_priv.setting[i]) {
Thank you for your patch-series, I've applied the series to my
review-hans branch:
https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git/log/?h=review-hans
Note it will show up in my review-hans branch once I've pushed my
local branch there, which might take a while.
Once I've run some tests on this branch the patches there will be
added to the platform-drivers-x86/for-next branch and eventually
will be included in the pdx86 pull-request to Linus for the next
merge-window.
Regards,
Hans
p.s.
I've also noticed 2 small possible cleanups, I will send out
a patch-series for that soon. Can you please give these cleanups
a test-spin (on top of my latest review-hans branch) ?
>
> drivers/platform/x86/think-lmi.c | 316 +++++++++++++++++++++++++++----
> drivers/platform/x86/think-lmi.h | 28 ++-
> 2 files changed, 310 insertions(+), 34 deletions(-)
>
> diff --git a/drivers/platform/x86/think-lmi.c b/drivers/platform/x86/think-lmi.c
> index c4d9c45350f7..6819bcac7d2e 100644
> --- a/drivers/platform/x86/think-lmi.c
> +++ b/drivers/platform/x86/think-lmi.c
> @@ -128,8 +128,23 @@ MODULE_PARM_DESC(debug_support, "Enable debug command support");
> */
> #define LENOVO_DEBUG_CMD_GUID "7FF47003-3B6C-4E5E-A227-E979824A85D1"
>
> +/*
> + * Name:
> + * Lenovo_OpcodeIF
> + * Description:
> + * Opcode interface which provides the ability to set multiple
> + * parameters and then trigger an action with a final command.
> + * This is particularly useful for simplifying setting passwords.
> + * With this support comes the ability to set System, HDD and NVMe
> + * passwords.
> + * This is currently available on ThinkCenter and ThinkStations platforms
> + */
> +#define LENOVO_OPCODE_IF_GUID "DFDDEF2C-57D4-48ce-B196-0FB787D90836"
> +
> #define TLMI_POP_PWD (1 << 0)
> #define TLMI_PAP_PWD (1 << 1)
> +#define TLMI_HDD_PWD (1 << 2)
> +#define TLMI_SYS_PWD (1 << 3)
> #define to_tlmi_pwd_setting(kobj) container_of(kobj, struct tlmi_pwd_setting, kobj)
> #define to_tlmi_attr_setting(kobj) container_of(kobj, struct tlmi_attr_setting, kobj)
>
> @@ -145,6 +160,10 @@ static const char * const encoding_options[] = {
> [TLMI_ENCODING_ASCII] = "ascii",
> [TLMI_ENCODING_SCANCODE] = "scancode",
> };
> +static const char * const level_options[] = {
> + [TLMI_LEVEL_USER] = "user",
> + [TLMI_LEVEL_MASTER] = "master",
> +};
> static struct think_lmi tlmi_priv;
> static struct class *fw_attr_class;
>
> @@ -233,6 +252,7 @@ static int tlmi_get_pwd_settings(struct tlmi_pwdcfg *pwdcfg)
> struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
> const union acpi_object *obj;
> acpi_status status;
> + int copy_size;
>
> if (!tlmi_priv.can_get_password_settings)
> return -EOPNOTSUPP;
> @@ -253,14 +273,21 @@ static int tlmi_get_pwd_settings(struct tlmi_pwdcfg *pwdcfg)
> * The size of thinkpad_wmi_pcfg on ThinkStation is larger than ThinkPad.
> * To make the driver compatible on different brands, we permit it to get
> * the data in below case.
> + * Settings must have at minimum the core fields available
> */
> - if (obj->buffer.length < sizeof(struct tlmi_pwdcfg)) {
> + if (obj->buffer.length < sizeof(struct tlmi_pwdcfg_core)) {
> pr_warn("Unknown pwdcfg buffer length %d\n", obj->buffer.length);
> kfree(obj);
> return -EIO;
> }
> - memcpy(pwdcfg, obj->buffer.pointer, sizeof(struct tlmi_pwdcfg));
> +
> + copy_size = obj->buffer.length < sizeof(struct tlmi_pwdcfg) ?
> + obj->buffer.length : sizeof(struct tlmi_pwdcfg);
> + memcpy(pwdcfg, obj->buffer.pointer, copy_size);
> kfree(obj);
> +
> + if (WARN_ON(pwdcfg->core.max_length >= TLMI_PWD_BUFSIZE))
> + pwdcfg->core.max_length = TLMI_PWD_BUFSIZE - 1;
> return 0;
> }
>
> @@ -270,6 +297,20 @@ static int tlmi_save_bios_settings(const char *password)
> password);
> }
>
> +static int tlmi_opcode_setting(char *setting, const char *value)
> +{
> + char *opcode_str;
> + int ret;
> +
> + opcode_str = kasprintf(GFP_KERNEL, "%s:%s;", setting, value);
> + if (!opcode_str)
> + return -ENOMEM;
> +
> + ret = tlmi_simple_call(LENOVO_OPCODE_IF_GUID, opcode_str);
> + kfree(opcode_str);
> + return ret;
> +}
> +
> static int tlmi_setting(int item, char **value, const char *guid_string)
> {
> struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
> @@ -370,16 +411,54 @@ static ssize_t new_password_store(struct kobject *kobj,
> goto out;
> }
>
> - /* Format: 'PasswordType,CurrentPw,NewPw,Encoding,KbdLang;' */
> - auth_str = kasprintf(GFP_KERNEL, "%s,%s,%s,%s,%s;",
> - setting->pwd_type, setting->password, new_pwd,
> - encoding_options[setting->encoding], setting->kbdlang);
> - if (!auth_str) {
> - ret = -ENOMEM;
> - goto out;
> + /* If opcode support is present use that interface */
> + if (tlmi_priv.opcode_support) {
> + char pwd_type[8];
> +
> + /* Special handling required for HDD and NVMe passwords */
> + if (setting == tlmi_priv.pwd_hdd) {
> + if (setting->level == TLMI_LEVEL_USER)
> + sprintf(pwd_type, "uhdp%d", setting->index);
> + else
> + sprintf(pwd_type, "mhdp%d", setting->index);
> + } else if (setting == tlmi_priv.pwd_nvme) {
> + if (setting->level == TLMI_LEVEL_USER)
> + sprintf(pwd_type, "unvp%d", setting->index);
> + else
> + sprintf(pwd_type, "mnvp%d", setting->index);
> + } else {
> + sprintf(pwd_type, "%s", setting->pwd_type);
> + }
> +
> + ret = tlmi_opcode_setting("WmiOpcodePasswordType", pwd_type);
> + if (ret)
> + goto out;
> +
> + if (tlmi_priv.pwd_admin->valid) {
> + ret = tlmi_opcode_setting("WmiOpcodePasswordAdmin",
> + tlmi_priv.pwd_admin->password);
> + if (ret)
> + goto out;
> + }
> + ret = tlmi_opcode_setting("WmiOpcodePasswordCurrent01", setting->password);
> + if (ret)
> + goto out;
> + ret = tlmi_opcode_setting("WmiOpcodePasswordNew01", new_pwd);
> + if (ret)
> + goto out;
> + ret = tlmi_simple_call(LENOVO_OPCODE_IF_GUID, "WmiOpcodePasswordSetUpdate;");
> + } else {
> + /* Format: 'PasswordType,CurrentPw,NewPw,Encoding,KbdLang;' */
> + auth_str = kasprintf(GFP_KERNEL, "%s,%s,%s,%s,%s;",
> + setting->pwd_type, setting->password, new_pwd,
> + encoding_options[setting->encoding], setting->kbdlang);
> + if (!auth_str) {
> + ret = -ENOMEM;
> + goto out;
> + }
> + ret = tlmi_simple_call(LENOVO_SET_BIOS_PASSWORD_GUID, auth_str);
> + kfree(auth_str);
> }
> - ret = tlmi_simple_call(LENOVO_SET_BIOS_PASSWORD_GUID, auth_str);
> - kfree(auth_str);
> out:
> kfree(new_pwd);
> return ret ?: count;
> @@ -475,6 +554,75 @@ static ssize_t role_show(struct kobject *kobj, struct kobj_attribute *attr,
> }
> static struct kobj_attribute auth_role = __ATTR_RO(role);
>
> +static ssize_t index_show(struct kobject *kobj, struct kobj_attribute *attr,
> + char *buf)
> +{
> + struct tlmi_pwd_setting *setting = to_tlmi_pwd_setting(kobj);
> +
> + return sysfs_emit(buf, "%d\n", setting->index);
> +}
> +
> +static ssize_t index_store(struct kobject *kobj,
> + struct kobj_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct tlmi_pwd_setting *setting = to_tlmi_pwd_setting(kobj);
> + int err, val;
> +
> + err = kstrtoint(buf, 10, &val);
> + if (err < 0)
> + return err;
> +
> + if (val > TLMI_INDEX_MAX)
> + return -EINVAL;
> +
> + setting->index = val;
> + return count;
> +}
> +
> +static struct kobj_attribute auth_index = __ATTR_RW(index);
> +
> +static ssize_t level_show(struct kobject *kobj, struct kobj_attribute *attr,
> + char *buf)
> +{
> + struct tlmi_pwd_setting *setting = to_tlmi_pwd_setting(kobj);
> +
> + return sysfs_emit(buf, "%s\n", level_options[setting->level]);
> +}
> +
> +static ssize_t level_store(struct kobject *kobj,
> + struct kobj_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct tlmi_pwd_setting *setting = to_tlmi_pwd_setting(kobj);
> + int i;
> +
> + /* Scan for a matching profile */
> + i = sysfs_match_string(level_options, buf);
> + if (i < 0)
> + return -EINVAL;
> +
> + setting->level = i;
> + return count;
> +}
> +
> +static struct kobj_attribute auth_level = __ATTR_RW(level);
> +
> +static umode_t auth_attr_is_visible(struct kobject *kobj,
> + struct attribute *attr, int n)
> +{
> + struct tlmi_pwd_setting *setting = to_tlmi_pwd_setting(kobj);
> +
> + /*We only want to display level and index settings on HDD/NVMe */
> + if ((attr == (struct attribute *)&auth_index) ||
> + (attr == (struct attribute *)&auth_level)) {
> + if ((setting == tlmi_priv.pwd_hdd) || (setting == tlmi_priv.pwd_nvme))
> + return attr->mode;
> + return 0;
> + }
> + return attr->mode;
> +}
> +
> static struct attribute *auth_attrs[] = {
> &auth_is_pass_set.attr,
> &auth_min_pass_length.attr,
> @@ -485,10 +633,13 @@ static struct attribute *auth_attrs[] = {
> &auth_mechanism.attr,
> &auth_encoding.attr,
> &auth_kbdlang.attr,
> + &auth_index.attr,
> + &auth_level.attr,
> NULL
> };
>
> static const struct attribute_group auth_attr_group = {
> + .is_visible = auth_attr_is_visible,
> .attrs = auth_attrs,
> };
>
> @@ -752,6 +903,16 @@ static void tlmi_release_attr(void)
> kobject_put(&tlmi_priv.pwd_admin->kobj);
> sysfs_remove_group(&tlmi_priv.pwd_power->kobj, &auth_attr_group);
> kobject_put(&tlmi_priv.pwd_power->kobj);
> +
> + if (tlmi_priv.opcode_support) {
> + sysfs_remove_group(&tlmi_priv.pwd_system->kobj, &auth_attr_group);
> + kobject_put(&tlmi_priv.pwd_system->kobj);
> + sysfs_remove_group(&tlmi_priv.pwd_hdd->kobj, &auth_attr_group);
> + kobject_put(&tlmi_priv.pwd_hdd->kobj);
> + sysfs_remove_group(&tlmi_priv.pwd_nvme->kobj, &auth_attr_group);
> + kobject_put(&tlmi_priv.pwd_nvme->kobj);
> + }
> +
> kset_unregister(tlmi_priv.authentication_kset);
> }
>
> @@ -831,7 +992,7 @@ static int tlmi_sysfs_init(void)
> goto fail_create_attr;
>
> tlmi_priv.pwd_power->kobj.kset = tlmi_priv.authentication_kset;
> - ret = kobject_add(&tlmi_priv.pwd_power->kobj, NULL, "%s", "System");
> + ret = kobject_add(&tlmi_priv.pwd_power->kobj, NULL, "%s", "Power-on");
> if (ret)
> goto fail_create_attr;
>
> @@ -839,6 +1000,35 @@ static int tlmi_sysfs_init(void)
> if (ret)
> goto fail_create_attr;
>
> + if (tlmi_priv.opcode_support) {
> + tlmi_priv.pwd_system->kobj.kset = tlmi_priv.authentication_kset;
> + ret = kobject_add(&tlmi_priv.pwd_system->kobj, NULL, "%s", "System");
> + if (ret)
> + goto fail_create_attr;
> +
> + ret = sysfs_create_group(&tlmi_priv.pwd_system->kobj, &auth_attr_group);
> + if (ret)
> + goto fail_create_attr;
> +
> + tlmi_priv.pwd_hdd->kobj.kset = tlmi_priv.authentication_kset;
> + ret = kobject_add(&tlmi_priv.pwd_hdd->kobj, NULL, "%s", "HDD");
> + if (ret)
> + goto fail_create_attr;
> +
> + ret = sysfs_create_group(&tlmi_priv.pwd_hdd->kobj, &auth_attr_group);
> + if (ret)
> + goto fail_create_attr;
> +
> + tlmi_priv.pwd_nvme->kobj.kset = tlmi_priv.authentication_kset;
> + ret = kobject_add(&tlmi_priv.pwd_nvme->kobj, NULL, "%s", "NVMe");
> + if (ret)
> + goto fail_create_attr;
> +
> + ret = sysfs_create_group(&tlmi_priv.pwd_nvme->kobj, &auth_attr_group);
> + if (ret)
> + goto fail_create_attr;
> + }
> +
> return ret;
>
> fail_create_attr:
> @@ -851,9 +1041,27 @@ static int tlmi_sysfs_init(void)
> }
>
> /* ---- Base Driver -------------------------------------------------------- */
> +static struct tlmi_pwd_setting *tlmi_create_auth(const char *pwd_type,
> + const char *pwd_role)
> +{
> + struct tlmi_pwd_setting *new_pwd;
> +
> + new_pwd = kzalloc(sizeof(struct tlmi_pwd_setting), GFP_KERNEL);
> + if (!new_pwd)
> + return NULL;
> +
> + strscpy(new_pwd->kbdlang, "us", TLMI_LANG_MAXLEN);
> + new_pwd->encoding = TLMI_ENCODING_ASCII;
> + new_pwd->pwd_type = pwd_type;
> + new_pwd->role = pwd_role;
> + new_pwd->minlen = tlmi_priv.pwdcfg.core.min_length;
> + new_pwd->maxlen = tlmi_priv.pwdcfg.core.max_length;
> + new_pwd->index = 0;
> + return new_pwd;
> +}
> +
> static int tlmi_analyze(void)
> {
> - struct tlmi_pwdcfg pwdcfg;
> acpi_status status;
> int i, ret;
>
> @@ -873,6 +1081,9 @@ static int tlmi_analyze(void)
> if (wmi_has_guid(LENOVO_DEBUG_CMD_GUID))
> tlmi_priv.can_debug_cmd = true;
>
> + if (wmi_has_guid(LENOVO_OPCODE_IF_GUID))
> + tlmi_priv.opcode_support = true;
> +
> /*
> * Try to find the number of valid settings of this machine
> * and use it to create sysfs attributes.
> @@ -923,45 +1134,79 @@ static int tlmi_analyze(void)
> }
>
> /* Create password setting structure */
> - ret = tlmi_get_pwd_settings(&pwdcfg);
> + ret = tlmi_get_pwd_settings(&tlmi_priv.pwdcfg);
> if (ret)
> goto fail_clear_attr;
>
> - tlmi_priv.pwd_admin = kzalloc(sizeof(struct tlmi_pwd_setting), GFP_KERNEL);
> + tlmi_priv.pwd_admin = tlmi_create_auth("pap", "bios-admin");
> if (!tlmi_priv.pwd_admin) {
> ret = -ENOMEM;
> goto fail_clear_attr;
> }
> - strscpy(tlmi_priv.pwd_admin->kbdlang, "us", TLMI_LANG_MAXLEN);
> - tlmi_priv.pwd_admin->encoding = TLMI_ENCODING_ASCII;
> - tlmi_priv.pwd_admin->pwd_type = "pap";
> - tlmi_priv.pwd_admin->role = "bios-admin";
> - tlmi_priv.pwd_admin->minlen = pwdcfg.min_length;
> - if (WARN_ON(pwdcfg.max_length >= TLMI_PWD_BUFSIZE))
> - pwdcfg.max_length = TLMI_PWD_BUFSIZE - 1;
> - tlmi_priv.pwd_admin->maxlen = pwdcfg.max_length;
> - if (pwdcfg.password_state & TLMI_PAP_PWD)
> + if (tlmi_priv.pwdcfg.core.password_state & TLMI_PAP_PWD)
> tlmi_priv.pwd_admin->valid = true;
>
> kobject_init(&tlmi_priv.pwd_admin->kobj, &tlmi_pwd_setting_ktype);
>
> - tlmi_priv.pwd_power = kzalloc(sizeof(struct tlmi_pwd_setting), GFP_KERNEL);
> + tlmi_priv.pwd_power = tlmi_create_auth("pop", "power-on");
> if (!tlmi_priv.pwd_power) {
> ret = -ENOMEM;
> goto fail_free_pwd_admin;
> }
> - strscpy(tlmi_priv.pwd_power->kbdlang, "us", TLMI_LANG_MAXLEN);
> - tlmi_priv.pwd_power->encoding = TLMI_ENCODING_ASCII;
> - tlmi_priv.pwd_power->pwd_type = "pop";
> - tlmi_priv.pwd_power->role = "power-on";
> - tlmi_priv.pwd_power->minlen = pwdcfg.min_length;
> - tlmi_priv.pwd_power->maxlen = pwdcfg.max_length;
> -
> - if (pwdcfg.password_state & TLMI_POP_PWD)
> + if (tlmi_priv.pwdcfg.core.password_state & TLMI_POP_PWD)
> tlmi_priv.pwd_power->valid = true;
>
> kobject_init(&tlmi_priv.pwd_power->kobj, &tlmi_pwd_setting_ktype);
>
> + if (tlmi_priv.opcode_support) {
> + tlmi_priv.pwd_system = tlmi_create_auth("sys", "system");
> + if (!tlmi_priv.pwd_system) {
> + ret = -ENOMEM;
> + goto fail_clear_attr;
> + }
> + if (tlmi_priv.pwdcfg.core.password_state & TLMI_SYS_PWD)
> + tlmi_priv.pwd_system->valid = true;
> +
> + kobject_init(&tlmi_priv.pwd_system->kobj, &tlmi_pwd_setting_ktype);
> +
> + tlmi_priv.pwd_hdd = tlmi_create_auth("hdd", "hdd");
> + if (!tlmi_priv.pwd_hdd) {
> + ret = -ENOMEM;
> + goto fail_clear_attr;
> + }
> + kobject_init(&tlmi_priv.pwd_hdd->kobj, &tlmi_pwd_setting_ktype);
> +
> + tlmi_priv.pwd_nvme = tlmi_create_auth("nvm", "nvme");
> + if (!tlmi_priv.pwd_nvme) {
> + ret = -ENOMEM;
> + goto fail_clear_attr;
> + }
> + kobject_init(&tlmi_priv.pwd_nvme->kobj, &tlmi_pwd_setting_ktype);
> +
> + if (tlmi_priv.pwdcfg.core.password_state & TLMI_HDD_PWD) {
> + /* Check if PWD is configured and set index to first drive found */
> + if (tlmi_priv.pwdcfg.ext.hdd_user_password ||
> + tlmi_priv.pwdcfg.ext.hdd_master_password) {
> + tlmi_priv.pwd_hdd->valid = true;
> + if (tlmi_priv.pwdcfg.ext.hdd_master_password)
> + tlmi_priv.pwd_hdd->index =
> + ffs(tlmi_priv.pwdcfg.ext.hdd_master_password) - 1;
> + else
> + tlmi_priv.pwd_hdd->index =
> + ffs(tlmi_priv.pwdcfg.ext.hdd_user_password) - 1;
> + }
> + if (tlmi_priv.pwdcfg.ext.nvme_user_password ||
> + tlmi_priv.pwdcfg.ext.nvme_master_password) {
> + tlmi_priv.pwd_nvme->valid = true;
> + if (tlmi_priv.pwdcfg.ext.nvme_master_password)
> + tlmi_priv.pwd_nvme->index =
> + ffs(tlmi_priv.pwdcfg.ext.nvme_master_password) - 1;
> + else
> + tlmi_priv.pwd_nvme->index =
> + ffs(tlmi_priv.pwdcfg.ext.nvme_user_password) - 1;
> + }
> + }
> + }
> return 0;
>
> fail_free_pwd_admin:
> @@ -973,6 +1218,11 @@ static int tlmi_analyze(void)
> kfree(tlmi_priv.setting[i]);
> }
> }
> + kfree(tlmi_priv.pwd_admin);
> + kfree(tlmi_priv.pwd_power);
> + kfree(tlmi_priv.pwd_system);
> + kfree(tlmi_priv.pwd_hdd);
> + kfree(tlmi_priv.pwd_nvme);
> return ret;
> }
>
> diff --git a/drivers/platform/x86/think-lmi.h b/drivers/platform/x86/think-lmi.h
> index 2ce5086a5af2..e46c7f383353 100644
> --- a/drivers/platform/x86/think-lmi.h
> +++ b/drivers/platform/x86/think-lmi.h
> @@ -9,6 +9,7 @@
> #define TLMI_SETTINGS_MAXLEN 512
> #define TLMI_PWD_BUFSIZE 129
> #define TLMI_LANG_MAXLEN 4
> +#define TLMI_INDEX_MAX 32
>
> /* Possible error values */
> struct tlmi_err_codes {
> @@ -21,8 +22,13 @@ enum encoding_option {
> TLMI_ENCODING_SCANCODE,
> };
>
> +enum level_option {
> + TLMI_LEVEL_USER,
> + TLMI_LEVEL_MASTER,
> +};
> +
> /* password configuration details */
> -struct tlmi_pwdcfg {
> +struct tlmi_pwdcfg_core {
> uint32_t password_mode;
> uint32_t password_state;
> uint32_t min_length;
> @@ -31,6 +37,18 @@ struct tlmi_pwdcfg {
> uint32_t supported_keyboard;
> };
>
> +struct tlmi_pwdcfg_ext {
> + uint32_t hdd_user_password;
> + uint32_t hdd_master_password;
> + uint32_t nvme_user_password;
> + uint32_t nvme_master_password;
> +};
> +
> +struct tlmi_pwdcfg {
> + struct tlmi_pwdcfg_core core;
> + struct tlmi_pwdcfg_ext ext;
> +};
> +
> /* password setting details */
> struct tlmi_pwd_setting {
> struct kobject kobj;
> @@ -42,6 +60,8 @@ struct tlmi_pwd_setting {
> int maxlen;
> enum encoding_option encoding;
> char kbdlang[TLMI_LANG_MAXLEN];
> + int index; /*Used for HDD and NVME auth */
> + enum level_option level;
> };
>
> /* Attribute setting details */
> @@ -61,13 +81,19 @@ struct think_lmi {
> bool can_get_password_settings;
> bool pending_changes;
> bool can_debug_cmd;
> + bool opcode_support;
>
> struct tlmi_attr_setting *setting[TLMI_SETTINGS_COUNT];
> struct device *class_dev;
> struct kset *attribute_kset;
> struct kset *authentication_kset;
> +
> + struct tlmi_pwdcfg pwdcfg;
> struct tlmi_pwd_setting *pwd_admin;
> struct tlmi_pwd_setting *pwd_power;
> + struct tlmi_pwd_setting *pwd_system;
> + struct tlmi_pwd_setting *pwd_hdd;
> + struct tlmi_pwd_setting *pwd_nvme;
> };
>
> #endif /* !_THINK_LMI_H_ */
>
