Am Do., 11. Nov. 2021 um 16:06 Uhr schrieb Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>: > > Hi, > > On Thu, Nov 11, 2021 at 11:42:52AM -0300, Mauro Lima wrote: > > > > > Having said that the hardware sequencer used in the recent CPUs should > > > > > be much safer in that sense. > > > > > > > > FWIW, I'd be fine if we had RO access for HWSEQ flash access only. If > > > > I understood correctly that's what Mauro proposed (with a patch) and > > > > instead was told that it was being rewritten as a mtd driver > > > > completion time unknown. > > > > > > I think Mauro proposed something different, basically exposing RO parts > > > of the driver only. > > > > My patch was intended to move the read functionality of the spi chip > > to be able to compile the driver with just that and then remove the > > dangerous tag. So we can use that functionality to read the flash, I'm > > missing what is different from the things being discussed here sorry. > > I'm hinting that we could make this "non-DANGEROUS" for hardware > sequencer parts of the driver. Basically moving only the software > sequencer bits as DANGEROUS or something like that. The hardware > sequencer is much more safer because it does not allow to run random > opcodes. > > In case someone is unfamiliar with this, the Intel SPI hardware > exposes two interfaces through the same controller. One that is called > software sequencer and there is a register of "allowed" opcodes that > software can use as it wishes. This register can be locked down but is > not always. The second interface is the hardware sequencer that only > exposes higher level commands like read, write and so on and internally > then executes whatever opcode the controller got from the chip > "supported opcodes table" (SFDP). The recent Intel hardware, all > big-cores, only provide hardware sequencer and the software one is not > even available. > I am familiar with this and I do totally agree. I believe HW sequencing is available since sandy-bridge from 2011, so it will suffice for modern platforms. Honestly me and my developer friends never understood why this driver needs to still focus on SW sequencing altogether, it seems like a (possibly buggy) relic that just slows down the vital parts. So I'd say it is a good idea to move the HW sequencing parts, basically splitting it, but still add a RO/RW flag to the module to be extra safe. > Regardless of all this the driver needs to be converted from MTD to SPI > (SPI MEM) before we can add any features. I'm planning to send v4 of > that series next week. This is an understandable reason and thank you for working on it. Hans-Gert
