https://bugzilla.kernel.org/show_bug.cgi?id=204807 Olli Asikainen (olli.asikainen@xxxxxxxxx) changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |olli.asikainen@xxxxxxxxx --- Comment #149 from Olli Asikainen (olli.asikainen@xxxxxxxxx) --- My ancient MAXIMUS VII HERO (NCT6791D) suffers from this bug as well. I added the board name to asus_wmi_boards, but this is what I get: [ 3.131718] nct6775: Using Asus WMI to access 0x0 chip. [ 3.131742] nct6775: Enabling hardware monitor logical device mappings. [ 3.131750] nct6775: Found NCT6791D or compatible chip at 0x2e:0x290 nct6791-isa-0290 Adapter: ISA adapter Vcore: 0.00 V (min = +0.00 V, max = +0.00 V) in1: 0.00 V (min = +0.00 V, max = +0.00 V) AVCC: 0.00 V (min = +0.00 V, max = +0.00 V) +3.3V: 0.00 V (min = +0.00 V, max = +0.00 V) in4: 0.00 V (min = +0.00 V, max = +0.00 V) in5: 0.00 V (min = +0.00 V, max = +0.00 V) in6: 0.00 V (min = +0.00 V, max = +0.00 V) 3VSB: 0.00 V (min = +0.00 V, max = +0.00 V) Vbat: 0.00 V (min = +0.00 V, max = +0.00 V) in9: 0.00 V (min = +0.00 V, max = +0.00 V) in10: 0.00 V (min = +0.00 V, max = +0.00 V) in11: 0.00 V (min = +0.00 V, max = +0.00 V) in12: 0.00 V (min = +0.00 V, max = +0.00 V) in13: 0.00 V (min = +0.00 V, max = +0.00 V) in14: 0.00 V (min = +0.00 V, max = +0.00 V) fan1: 0 RPM (min = 0 RPM) fan2: 0 RPM (min = 0 RPM) fan3: 0 RPM (min = 0 RPM) fan4: 0 RPM (min = 0 RPM) fan5: 0 RPM (min = 0 RPM) SYSTIN: +0.0°C (high = +0.0°C, hyst = +0.0°C) sensor = thermistor CPUTIN: +0.0°C (high = +0.0°C, hyst = +0.0°C) sensor = thermistor AUXTIN0: +0.0°C sensor = thermistor AUXTIN1: +0.0°C sensor = thermistor AUXTIN2: +0.0°C sensor = thermistor AUXTIN3: +0.0°C sensor = thermistor PCH_CHIP_CPU_MAX_TEMP: +0.0°C PCH_CHIP_TEMP: +0.0°C PCH_CPU_TEMP: +0.0°C PCH_MCH_TEMP: +0.0°C intrusion0: OK intrusion1: OK beep_enable: disabled Any idea? -- You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
