From: Daniel Scally <djrscally@xxxxxxxxx> The TPS68470 PMIC has an I2C passthrough mode through which I2C traffic can be forwarded to a device connected to the PMIC as though it were connected directly to the system bus. Enable this mode when the chip is initialised. Signed-off-by: Daniel Scally <djrscally@xxxxxxxxx> --- .../x86/intel/int3472/intel_skl_int3472_tps68470.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/platform/x86/intel/int3472/intel_skl_int3472_tps68470.c b/drivers/platform/x86/intel/int3472/intel_skl_int3472_tps68470.c index c05b4cf502fe..42e688f4cad4 100644 --- a/drivers/platform/x86/intel/int3472/intel_skl_int3472_tps68470.c +++ b/drivers/platform/x86/intel/int3472/intel_skl_int3472_tps68470.c @@ -45,6 +45,13 @@ static int tps68470_chip_init(struct device *dev, struct regmap *regmap) return ret; } + /* Enable I2C daisy chain */ + ret = regmap_write(regmap, TPS68470_REG_S_I2C_CTL, 0x03); + if (ret) { + dev_err(dev, "Failed to enable i2c daisy chain\n"); + return ret; + } + dev_info(dev, "TPS68470 REVID: 0x%02x\n", version); return 0; -- 2.31.1