https://bugzilla.kernel.org/show_bug.cgi?id=204807 --- Comment #112 from sefoci9222@xxxxxxxxxxxx --- please add: cat /sys/class/dmi/id/board_name ROG STRIX X570-F GAMING can confirm latest debug.diff is working, many thanks: Now follows a summary of the probes I have just done. Just press ENTER to continue: Driver `nct6775': * ISA bus, address 0x290 Chip `Nuvoton NCT6798D Super IO Sensors' (confidence: 9) Driver `k10temp' (autoloaded): * Chip `AMD Family 17h thermal sensors' (confidence: 9) Do you want to overwrite /etc/sysconfig/lm_sensors? (YES/no): Unloading i2c-dev... OK - Sep 15 01:55:35 desk kernel: nct6775: Using Asus WMI to access 0xc1 chip. Sep 15 01:55:35 desk kernel: nct6775: Found NCT6798D or compatible chip at 0x2e:0x290 Sep 15 02:02:41 desk systemd[1]: Starting Hardware Monitoring Sensors... Sep 15 02:02:41 desk kernel: nct6775: Using Asus WMI to access 0xc1 chip. Sep 15 02:02:41 desk kernel: nct6775: Found NCT6798D or compatible chip at 0x2e:0x290 Sep 15 02:02:41 desk systemd[1]: Finished Hardware Monitoring Sensors. - [root@desk testM]# sensors amdgpu-pci-0700 Adapter: PCI adapter vddgfx: 950.00 mV fan1: 835 RPM (min = 0 RPM, max = 3200 RPM) edge: +39.0°C (crit = +91.0°C, hyst = -273.1°C) power1: 44.15 W (cap = 277.00 W) nct6798-isa-0290 Adapter: ISA adapter in0: 888.00 mV (min = +0.00 V, max = +1.74 V) in1: 992.00 mV (min = +0.00 V, max = +0.00 V) ALARM in2: 3.38 V (min = +0.00 V, max = +0.00 V) ALARM in3: 3.30 V (min = +0.00 V, max = +0.00 V) ALARM in4: 1.02 V (min = +0.00 V, max = +0.00 V) ALARM in5: 960.00 mV (min = +0.00 V, max = +0.00 V) ALARM in6: 256.00 mV (min = +0.00 V, max = +0.00 V) ALARM in7: 3.38 V (min = +0.00 V, max = +0.00 V) ALARM in8: 3.33 V (min = +0.00 V, max = +0.00 V) ALARM in9: 904.00 mV (min = +0.00 V, max = +0.00 V) ALARM in10: 480.00 mV (min = +0.00 V, max = +0.00 V) ALARM in11: 496.00 mV (min = +0.00 V, max = +0.00 V) ALARM in12: 1.03 V (min = +0.00 V, max = +0.00 V) ALARM in13: 344.00 mV (min = +0.00 V, max = +0.00 V) ALARM in14: 256.00 mV (min = +0.00 V, max = +0.00 V) ALARM fan1: 678 RPM (min = 0 RPM) fan2: 575 RPM (min = 0 RPM) fan3: 1050 RPM (min = 0 RPM) fan4: 738 RPM (min = 0 RPM) fan5: 0 RPM (min = 0 RPM) fan6: 0 RPM (min = 0 RPM) SYSTIN: +28.0°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor CPUTIN: +33.0°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor AUXTIN0: +86.0°C sensor = thermistor AUXTIN1: +28.0°C sensor = thermistor AUXTIN2: +26.0°C sensor = thermistor AUXTIN3: +91.0°C sensor = thermistor PECI Agent 0 Calibration: +33.5°C PCH_CHIP_CPU_MAX_TEMP: +0.0°C PCH_CHIP_TEMP: +0.0°C PCH_CPU_TEMP: +0.0°C intrusion0: ALARM intrusion1: ALARM beep_enable: disabled k10temp-pci-00c3 Adapter: PCI adapter Tctl: +32.6°C Tdie: +32.6°C Tccd1: +39.5°C -- You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.