Additionally to the above I've taken in to account feedback for v7
patch, and cleaned up plus tidied a few things.
I'll again attach for quick look over before I submit next patch as
full review. I am thinking that this version (v9 here) is the proper
and expected outcome.
Cheers,
Luke
On Tue, Aug 31 2021 at 20:58:49 +1200, Luke Jones <luke@xxxxxxxxxx>
wrote:
Hi Barnabás,
I did another refactor using hwmon_device_register_with_info() and
HWMON_CHANNEL_INFO(). I'm unsure if this is what you were looking for
so I'm going to attach the patch instead of submitting as a V8 for
now.
My main concern as that the use of the above removes the
pwm1_auto_point1_pwm + pwm1_auto_point1_temp format and gives two
hwmon<num>, one per cpu/gpu fan with:
device power
fan1_input subsystem
fan2_input temp1_input
fan3_input temp2_input
fan4_input temp3_input
fan5_input temp4_input
fan6_input temp5_input
fan7_input temp6_input
fan8_input temp7_input
in0_enable temp8_input
name uevent
cat -p /sys/devices/platform/asus-nb-wmi/hwmon/hwmon7/name
asus_cpu_fan_custom_curve
I've named the root name of each as descriptive as possible to convey
exactly what each is
Oh and `sensors` now shows:
asus_cpu_fan_curve-isa-0000
Adapter: ISA adapter
fan1: 8 RPM
fan2: 10 RPM
fan3: 18 RPM
fan4: 20 RPM
fan5: 28 RPM
fan6: 34 RPM
fan7: 44 RPM
fan8: 56 RPM
temp1: +0.0°C
temp2: +0.1°C
temp3: +0.1°C
temp4: +0.1°C
temp5: +0.1°C
temp6: +0.1°C
temp7: +0.1°C
temp8: +0.1°C
> FYI, the pwmX_enable attributes can be created by the hwmon
> subsystem itself if you use [devm_]hwmon_device_register_with_info()
> with appropriately populated `struct hwmon_chip_info`.
So when you say this, did you mean *just* for the pwmX_enable
attributes?
On Mon, Aug 30 2021 at 21:28:18 +0000, Barnabás Pőcze
<pobrn@xxxxxxxxxxxxxx> wrote:
Hi
2021. augusztus 30., hétfő 13:31 keltezéssel, Luke D. Jones írta:
Add support for custom fan curves found on some ASUS ROG laptops.
These laptops have the ability to set a custom curve for the CPU
and GPU fans via an ACPI method call. This patch enables this,
additionally enabling custom fan curves per-profile, where profile
here means each of the 3 levels of "throttle_thermal_policy".
This patch adds two blocks of attributes to the hwmon sysfs,
1 block each for CPU and GPU fans.
When the user switches profiles the associated curve data for that
profile is then show/store enabled to allow users to rotate through
the profiles and set a fan curve for each profile which then
activates on profile switch if enabled.
Signed-off-by: Luke D. Jones <luke@xxxxxxxxxx>
---
drivers/platform/x86/asus-wmi.c | 568
++++++++++++++++++++-
include/linux/platform_data/x86/asus-wmi.h | 2 +
2 files changed, 566 insertions(+), 4 deletions(-)
diff --git a/drivers/platform/x86/asus-wmi.c
b/drivers/platform/x86/asus-wmi.c
index cc5811844012..b594c2475034 100644
--- a/drivers/platform/x86/asus-wmi.c
+++ b/drivers/platform/x86/asus-wmi.c
[...]
+/*
+ * Returns as an error if the method output is not a buffer.
Typically this
It seems to me it will simply leave the output buffer uninitialized
if something
other than ACPI_TYPE_BUFFER and ACPI_TYPE_INTEGER is encountered and
return 0.
+ * means that the method called is unsupported.
+ */
+static int asus_wmi_evaluate_method_buf(u32 method_id,
+ u32 arg0, u32 arg1, u8 *ret_buffer)
+{
+ struct bios_args args = {
+ .arg0 = arg0,
+ .arg1 = arg1,
+ .arg2 = 0,
+ };
+ struct acpi_buffer input = { (acpi_size) sizeof(args), &args };
+ struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
+ acpi_status status;
+ union acpi_object *obj;
+ u32 int_tmp = 0;
+
+ status = wmi_evaluate_method(ASUS_WMI_MGMT_GUID, 0, method_id,
+ &input, &output);
+
+ if (ACPI_FAILURE(status))
+ return -EIO;
+
+ obj = (union acpi_object *)output.pointer;
+
+ if (obj && obj->type == ACPI_TYPE_INTEGER) {
+ int_tmp = (u32) obj->integer.value;
+ if (int_tmp == ASUS_WMI_UNSUPPORTED_METHOD)
+ return -ENODEV;
+ return int_tmp;
Is anything known about the possible values? You are later
using it as if it was an errno (e.g. in
`custom_fan_check_present()`).
And `obj` is leaked in both of the previous two returns.
+ }
+
+ if (obj && obj->type == ACPI_TYPE_BUFFER)
+ memcpy(ret_buffer, obj->buffer.pointer, obj->buffer.length);
I would suggest you add a "size_t size" argument to this function,
and
return -ENOSPC/-ENODATA depending on whether the returned buffer is
too
big/small. Maybe return -ENODATA if `obj` is NULL, too.
+
+ kfree(obj);
+
+ return 0;
+}
[...]
+static ssize_t fan_curve_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct fan_curve_data *data = fan_curve_attr_data_select(dev,
attr);
+ int value;
+
+ int index = to_sensor_dev_attr_2(attr)->index;
+ int nr = to_sensor_dev_attr_2(attr)->nr;
+ int pwm = nr & FAN_CURVE_PWM_MASK;
+
+ if (pwm)
+ value = 255 * data->percents[index] / 100;
+ else
+ value = data->temps[index];
+
+ return scnprintf(buf, PAGE_SIZE, "%d\n", value);
sysfs_emit()
+}
+
+/*
+ * "dev" is the related WMI method such as
ASUS_WMI_DEVID_CPU_FAN_CURVE.
+ */
+static int fan_curve_write(struct asus_wmi *asus, u32 dev,
+ struct fan_curve_data *data)
+{
+ int ret, i, shift = 0;
+ u32 arg1, arg2, arg3, arg4;
+
+ arg1 = arg2 = arg3 = arg4 = 0;
+
+ for (i = 0; i < FAN_CURVE_POINTS / 2; i++) {
+ arg1 += data->temps[i] << shift;
+ arg2 += data->temps[i + 4] << shift;
+ arg3 += data->percents[0] << shift;
+ arg4 += data->percents[i + 4] << shift;
+ shift += 8;
+ }
+
+ return asus_wmi_evaluate_method5(ASUS_WMI_METHODID_DEVS, dev,
+ arg1, arg2, arg3, arg4, &ret);
+}
+
+/*
+ * Called only by throttle_thermal_policy_write()
+ */
Am I correct in thinking that the firmware does not actually
support specifying fan curves for each mode, only a single one,
and the fan curve switching is done by this driver when
the performance mode is changed?
+static int fan_curve_write_data(struct asus_wmi *asus)
+{
+ struct fan_curve_data *cpu;
+ struct fan_curve_data *gpu;
+ int err, mode;
+
+ mode = asus->throttle_thermal_policy_mode;
+ cpu = &asus->throttle_fan_curves[mode][FAN_CURVE_DEV_CPU];
+ gpu = &asus->throttle_fan_curves[mode][FAN_CURVE_DEV_GPU];
+
+ if (cpu->enabled) {
+ err = fan_curve_write(asus, ASUS_WMI_DEVID_CPU_FAN_CURVE, cpu);
+ if (err)
+ return err;
+ }
+
+ if (gpu->enabled) {
+ err = fan_curve_write(asus, ASUS_WMI_DEVID_GPU_FAN_CURVE, gpu);
+ if (err)
+ return err;
+ }
+
+ return 0;
+}
[...]
+static ssize_t fan_curve_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct fan_curve_data *data = fan_curve_attr_data_select(dev,
attr);
+ u8 value, old_value;
+ int err;
+
+ int index = to_sensor_dev_attr_2(attr)->index;
+ int nr = to_sensor_dev_attr_2(attr)->nr;
+ int pwm = nr & FAN_CURVE_PWM_MASK;
+
+ err = kstrtou8(buf, 10, &value);
+ if (err < 0)
+ return err;
+
+ if (pwm) {
+ old_value = data->percents[index];
+ data->percents[index] = 100 * value / 255;
+ } else {
+ old_value = data->temps[index];
+ data->temps[index] = value;
+ }
+ /*
+ * The check here forces writing a curve graph in reverse,
+ * from highest to lowest.
+ */
+ err = fan_curve_verify(data);
+ if (err) {
+ if (pwm) {
+ dev_err(dev, "a fan curve percentage was higher than the next
in sequence\n");
+ data->percents[index] = old_value;
+ } else {
+ dev_err(dev, "a fan curve temperature was higher than the next
in sequence\n");
+ data->temps[index] = old_value;
+ }
+ return err;
+ }
Are such sequences rejected by the firmware itself?
Or is this just an extra layer of protection?
+
+ return count;
+}
+
+static ssize_t fan_curve_enable_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct fan_curve_data *data = fan_curve_attr_data_select(dev,
attr);
+
+ return scnprintf(buf, PAGE_SIZE, "%d\n", data->enabled);
sysfs_emit()
+}
+
+static ssize_t fan_curve_enable_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct fan_curve_data *data = fan_curve_attr_data_select(dev,
attr);
+ struct asus_wmi *asus = dev_get_drvdata(dev);
+ bool value;
+ int err;
+
+ err = kstrtobool(buf, &value);
+ if (err < 0)
+ return err;
+
+ data->enabled = value;
+ throttle_thermal_policy_write(asus);
+
+ return count;
+}
+
+/* CPU */
+// TODO: enable
+static SENSOR_DEVICE_ATTR_RW(pwm1_enable, fan_curve_enable,
+ FAN_CURVE_DEV_CPU);
FYI, the pwmX_enable attributes can be created by the hwmon
subsystem itself if you use [devm_]hwmon_device_register_with_info()
with appropriately populated `struct hwmon_chip_info`.
[...]
+static const struct attribute_group fan_curve_attribute_group = {
+ .is_visible = fan_curve_sysfs_is_visible,
+ .attrs = fan_curve_attributes
Small thing, but it is customary to put commas after non-terminating
entries in initializers / enum definitions.
+};
+__ATTRIBUTE_GROUPS(fan_curve_attribute);
+
+static int asus_wmi_fan_curve_init(struct asus_wmi *asus)
+{
+ struct device *dev = &asus->platform_device->dev;
+ struct device *hwmon;
+
+ hwmon = devm_hwmon_device_register_with_groups(dev, "asus", asus,
+ fan_curve_attribute_groups);
+
+ if (IS_ERR(hwmon)) {
+ pr_err("Could not register asus fan_curve device\n");
I think `dev_err()` would be better.
+ return PTR_ERR(hwmon);
+ }
+
+ return 0;
+}
[...]
diff --git a/include/linux/platform_data/x86/asus-wmi.h
b/include/linux/platform_data/x86/asus-wmi.h
index 17dc5cb6f3f2..a571b47ff362 100644
--- a/include/linux/platform_data/x86/asus-wmi.h
+++ b/include/linux/platform_data/x86/asus-wmi.h
@@ -77,6 +77,8 @@
#define ASUS_WMI_DEVID_THERMAL_CTRL 0x00110011
#define ASUS_WMI_DEVID_FAN_CTRL 0x00110012 /* deprecated */
#define ASUS_WMI_DEVID_CPU_FAN_CTRL 0x00110013
+#define ASUS_WMI_DEVID_CPU_FAN_CURVE 0x00110024
+#define ASUS_WMI_DEVID_GPU_FAN_CURVE 0x00110025
/* Power */
#define ASUS_WMI_DEVID_PROCESSOR_STATE 0x00120012
--
2.31.1
Best regards,
Barnabás Pőcze
From 05f7f9c4990e097b8a71a2a39a36aa1d5d39742a Mon Sep 17 00:00:00 2001
From: "Luke D. Jones" <luke@xxxxxxxxxx>
Date: Sun, 29 Aug 2021 13:21:23 +1200
Subject: [PATCH v9] asus-wmi: Add support for custom fan curves
Add support for custom fan curves found on some ASUS ROG laptops.
These laptops have the ability to set a custom curve for the CPU
and GPU fans via an ACPI method call. This patch enables this,
additionally enabling custom fan curves per-profile, where profile
here means each of the 3 levels of "throttle_thermal_policy".
This patch adds two blocks of attributes to the hwmon sysfs,
1 block each for CPU and GPU fans.
When the user switches profiles the associated curve data for that
profile is then show/store enabled to allow users to rotate through
the profiles and set a fan curve for each profile which then
activates on profile switch if enabled.
Signed-off-by: Luke D. Jones <luke@xxxxxxxxxx>
---
drivers/platform/x86/asus-wmi.c | 568 ++++++++++++++++++++-
include/linux/platform_data/x86/asus-wmi.h | 2 +
2 files changed, 566 insertions(+), 4 deletions(-)
diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
index cc5811844012..b594c2475034 100644
--- a/drivers/platform/x86/asus-wmi.c
+++ b/drivers/platform/x86/asus-wmi.c
@@ -106,8 +106,18 @@ module_param(fnlock_default, bool, 0444);
#define WMI_EVENT_MASK 0xFFFF
+/* The number of ASUS_THROTTLE_THERMAL_POLICY_* available */
+#define FAN_CURVE_PROFILE_NUM (ASUS_THROTTLE_THERMAL_POLICY_SILENT + 1)
+#define FAN_CURVE_POINTS 8
+#define FAN_CURVE_DEV_CPU 0x00
+#define FAN_CURVE_DEV_GPU 0x01
+/* Mask to determine if setting temperature or percentage */
+#define FAN_CURVE_PWM_MASK 0x04
+
static const char * const ashs_ids[] = { "ATK4001", "ATK4002", NULL };
+static int throttle_thermal_policy_write(struct asus_wmi *);
+
static bool ashs_present(void)
{
int i = 0;
@@ -122,7 +132,8 @@ struct bios_args {
u32 arg0;
u32 arg1;
u32 arg2; /* At least TUF Gaming series uses 3 dword input buffer. */
- u32 arg4;
+ u32 arg3;
+ u32 arg4; /* Some ROG laptops require a full 5 input args */
u32 arg5;
} __packed;
@@ -173,6 +184,17 @@ enum fan_type {
FAN_TYPE_SPEC83, /* starting in Spec 8.3, use CPU_FAN_CTRL */
};
+/*
+ * The related ACPI method for testing availability also returns the factory
+ * default fan curves. We save them here so that a user can reset custom
+ * settings if required.
+ */
+struct fan_curve_data {
+ bool enabled;
+ u8 temps[FAN_CURVE_POINTS];
+ u8 percents[FAN_CURVE_POINTS];
+};
+
struct asus_wmi {
int dsts_id;
int spec;
@@ -220,6 +242,11 @@ struct asus_wmi {
bool throttle_thermal_policy_available;
u8 throttle_thermal_policy_mode;
+ bool cpu_fan_curve_available;
+ bool gpu_fan_curve_available;
+ /* [throttle modes][fan count] */
+ struct fan_curve_data throttle_fan_curves[FAN_CURVE_PROFILE_NUM][2];
+
struct platform_profile_handler platform_profile_handler;
bool platform_profile_support;
@@ -285,6 +312,84 @@ int asus_wmi_evaluate_method(u32 method_id, u32 arg0, u32 arg1, u32 *retval)
}
EXPORT_SYMBOL_GPL(asus_wmi_evaluate_method);
+static int asus_wmi_evaluate_method5(u32 method_id,
+ u32 arg0, u32 arg1, u32 arg2, u32 arg3, u32 arg4, u32 *retval)
+{
+ struct bios_args args = {
+ .arg0 = arg0,
+ .arg1 = arg1,
+ .arg2 = arg2,
+ .arg3 = arg3,
+ .arg4 = arg4,
+ };
+ struct acpi_buffer input = { (acpi_size) sizeof(args), &args };
+ struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
+ acpi_status status;
+ union acpi_object *obj;
+ u32 tmp = 0;
+
+ status = wmi_evaluate_method(ASUS_WMI_MGMT_GUID, 0, method_id,
+ &input, &output);
+
+ if (ACPI_FAILURE(status))
+ return -EIO;
+
+ obj = (union acpi_object *)output.pointer;
+ if (obj && obj->type == ACPI_TYPE_INTEGER)
+ tmp = (u32) obj->integer.value;
+
+ if (retval)
+ *retval = tmp;
+
+ kfree(obj);
+
+ if (tmp == ASUS_WMI_UNSUPPORTED_METHOD)
+ return -ENODEV;
+
+ return 0;
+}
+
+/*
+ * Returns as an error if the method output is not a buffer. Typically this
+ * means that the method called is unsupported.
+ */
+static int asus_wmi_evaluate_method_buf(u32 method_id,
+ u32 arg0, u32 arg1, u8 *ret_buffer)
+{
+ struct bios_args args = {
+ .arg0 = arg0,
+ .arg1 = arg1,
+ .arg2 = 0,
+ };
+ struct acpi_buffer input = { (acpi_size) sizeof(args), &args };
+ struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
+ acpi_status status;
+ union acpi_object *obj;
+ u32 int_tmp = 0;
+
+ status = wmi_evaluate_method(ASUS_WMI_MGMT_GUID, 0, method_id,
+ &input, &output);
+
+ if (ACPI_FAILURE(status))
+ return -EIO;
+
+ obj = (union acpi_object *)output.pointer;
+
+ if (obj && obj->type == ACPI_TYPE_INTEGER) {
+ int_tmp = (u32) obj->integer.value;
+ if (int_tmp == ASUS_WMI_UNSUPPORTED_METHOD)
+ return -ENODEV;
+ return int_tmp;
+ }
+
+ if (obj && obj->type == ACPI_TYPE_BUFFER)
+ memcpy(ret_buffer, obj->buffer.pointer, obj->buffer.length);
+
+ kfree(obj);
+
+ return 0;
+}
+
static int asus_wmi_evaluate_method_agfn(const struct acpi_buffer args)
{
struct acpi_buffer input;
@@ -2043,6 +2148,440 @@ static ssize_t fan_boost_mode_store(struct device *dev,
// Fan boost mode: 0 - normal, 1 - overboost, 2 - silent
static DEVICE_ATTR_RW(fan_boost_mode);
+/* Custom fan curves per-profile **********************************************/
+
+static void init_fan_curve(struct fan_curve_data *data, u8 *buf)
+{
+ int i;
+
+ for (i = 0; i < FAN_CURVE_POINTS; i++)
+ data->temps[i] = buf[i];
+
+ for (i = 0; i < FAN_CURVE_POINTS; i++)
+ data->percents[i] = buf[i + 8];
+}
+
+/*
+ * Check if the ability to set fan curves on either fan exists, and populate
+ * with system defaults to provide users with a starting point.
+ *
+ * "dev" is either CPU_FAN_CURVE or GPU_FAN_CURVE.
+ */
+static int custom_fan_check_present(struct asus_wmi *asus,
+ bool *available, u32 dev)
+{
+ struct fan_curve_data *curves;
+ u8 buf[FAN_CURVE_POINTS * 2];
+ int fan_idx = 0;
+ int err;
+
+ *available = false;
+ if (dev == ASUS_WMI_DEVID_GPU_FAN_CURVE)
+ fan_idx = 1;
+
+ /* Balanced default */
+ curves = &asus->throttle_fan_curves
+ [ASUS_THROTTLE_THERMAL_POLICY_DEFAULT][fan_idx];
+ err = asus_wmi_evaluate_method_buf(asus->dsts_id, dev, 0, buf);
+ if (err) {
+ if (err == -ENODEV)
+ return 0;
+ return err;
+ }
+ init_fan_curve(curves, buf);
+
+ /*
+ * Quiet default. The index num for ACPI method does not match the
+ * throttle_thermal number, same for Performance.
+ */
+ curves = &asus->throttle_fan_curves
+ [ASUS_THROTTLE_THERMAL_POLICY_SILENT][fan_idx];
+ err = asus_wmi_evaluate_method_buf(asus->dsts_id, dev, 1, buf);
+ if (err) {
+ if (err == -ENODEV)
+ return 0;
+ return err;
+ }
+ init_fan_curve(curves, buf);
+
+ /* Performance default */
+ curves = &asus->throttle_fan_curves
+ [ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST][fan_idx];
+ err = asus_wmi_evaluate_method_buf(asus->dsts_id, dev, 2, buf);
+ if (err) {
+ if (err == -ENODEV)
+ return 0;
+ return err;
+ }
+ init_fan_curve(curves, buf);
+
+ *available = true;
+ return 0;
+}
+
+static struct fan_curve_data *fan_curve_attr_data_select(struct device *dev,
+ struct device_attribute *attr)
+{
+ struct asus_wmi *asus = dev_get_drvdata(dev);
+ u8 mode = asus->throttle_thermal_policy_mode;
+
+ int nr = to_sensor_dev_attr_2(attr)->nr;
+ int fan = nr & FAN_CURVE_DEV_GPU;
+
+ return &asus->throttle_fan_curves[mode][fan];
+}
+
+static ssize_t fan_curve_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct fan_curve_data *data = fan_curve_attr_data_select(dev, attr);
+ int value;
+
+ int index = to_sensor_dev_attr_2(attr)->index;
+ int nr = to_sensor_dev_attr_2(attr)->nr;
+ int pwm = nr & FAN_CURVE_PWM_MASK;
+
+ if (pwm)
+ value = 255 * data->percents[index] / 100;
+ else
+ value = data->temps[index];
+
+ return scnprintf(buf, PAGE_SIZE, "%d\n", value);
+}
+
+/*
+ * "dev" is the related WMI method such as ASUS_WMI_DEVID_CPU_FAN_CURVE.
+ */
+static int fan_curve_write(struct asus_wmi *asus, u32 dev,
+ struct fan_curve_data *data)
+{
+ int ret, i, shift = 0;
+ u32 arg1, arg2, arg3, arg4;
+
+ arg1 = arg2 = arg3 = arg4 = 0;
+
+ for (i = 0; i < FAN_CURVE_POINTS / 2; i++) {
+ arg1 += data->temps[i] << shift;
+ arg2 += data->temps[i + 4] << shift;
+ arg3 += data->percents[0] << shift;
+ arg4 += data->percents[i + 4] << shift;
+ shift += 8;
+ }
+
+ return asus_wmi_evaluate_method5(ASUS_WMI_METHODID_DEVS, dev,
+ arg1, arg2, arg3, arg4, &ret);
+}
+
+/*
+ * Called only by throttle_thermal_policy_write()
+ */
+static int fan_curve_write_data(struct asus_wmi *asus)
+{
+ struct fan_curve_data *cpu;
+ struct fan_curve_data *gpu;
+ int err, mode;
+
+ mode = asus->throttle_thermal_policy_mode;
+ cpu = &asus->throttle_fan_curves[mode][FAN_CURVE_DEV_CPU];
+ gpu = &asus->throttle_fan_curves[mode][FAN_CURVE_DEV_GPU];
+
+ if (cpu->enabled) {
+ err = fan_curve_write(asus, ASUS_WMI_DEVID_CPU_FAN_CURVE, cpu);
+ if (err)
+ return err;
+ }
+
+ if (gpu->enabled) {
+ err = fan_curve_write(asus, ASUS_WMI_DEVID_GPU_FAN_CURVE, gpu);
+ if (err)
+ return err;
+ }
+
+ return 0;
+}
+
+static int fan_curve_verify(struct fan_curve_data *data)
+{
+ int i = 0;
+ u8 tmp = 0;
+ u8 prev_tmp = 0;
+
+
+ for (i = 0; i < FAN_CURVE_POINTS; i++) {
+ tmp = data->temps[i];
+ if (tmp < prev_tmp)
+ return -EINVAL;
+ prev_tmp = tmp;
+ }
+
+ tmp = 0;
+ prev_tmp = 0;
+ for (i = 0; i < FAN_CURVE_POINTS; i++) {
+ tmp = data->percents[i];
+ if (tmp < prev_tmp)
+ return -EINVAL;
+ prev_tmp = tmp;
+ }
+
+ return 0;
+}
+
+static ssize_t fan_curve_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct fan_curve_data *data = fan_curve_attr_data_select(dev, attr);
+ u8 value, old_value;
+ int err;
+
+ int index = to_sensor_dev_attr_2(attr)->index;
+ int nr = to_sensor_dev_attr_2(attr)->nr;
+ int pwm = nr & FAN_CURVE_PWM_MASK;
+
+ err = kstrtou8(buf, 10, &value);
+ if (err < 0)
+ return err;
+
+ if (pwm) {
+ old_value = data->percents[index];
+ data->percents[index] = 100 * value / 255;
+ } else {
+ old_value = data->temps[index];
+ data->temps[index] = value;
+ }
+ /*
+ * The check here forces writing a curve graph in reverse,
+ * from highest to lowest.
+ */
+ err = fan_curve_verify(data);
+ if (err) {
+ if (pwm) {
+ dev_err(dev, "a fan curve percentage was higher than the next in sequence\n");
+ data->percents[index] = old_value;
+ } else {
+ dev_err(dev, "a fan curve temperature was higher than the next in sequence\n");
+ data->temps[index] = old_value;
+ }
+ return err;
+ }
+
+ return count;
+}
+
+static ssize_t fan_curve_enable_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct fan_curve_data *data = fan_curve_attr_data_select(dev, attr);
+
+ return scnprintf(buf, PAGE_SIZE, "%d\n", data->enabled);
+}
+
+static ssize_t fan_curve_enable_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct fan_curve_data *data = fan_curve_attr_data_select(dev, attr);
+ struct asus_wmi *asus = dev_get_drvdata(dev);
+ bool value;
+ int err;
+
+ err = kstrtobool(buf, &value);
+ if (err < 0)
+ return err;
+
+ data->enabled = value;
+ throttle_thermal_policy_write(asus);
+
+ return count;
+}
+
+/* CPU */
+// TODO: enable
+static SENSOR_DEVICE_ATTR_RW(pwm1_enable, fan_curve_enable,
+ FAN_CURVE_DEV_CPU);
+// (name, function, fan, point) TODO: need to mask if temp or percent
+static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point1_temp, fan_curve,
+ FAN_CURVE_DEV_CPU, 0);
+static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point2_temp, fan_curve,
+ FAN_CURVE_DEV_CPU, 1);
+static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point3_temp, fan_curve,
+ FAN_CURVE_DEV_CPU, 2);
+static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point4_temp, fan_curve,
+ FAN_CURVE_DEV_CPU, 3);
+static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point5_temp, fan_curve,
+ FAN_CURVE_DEV_CPU, 4);
+static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point6_temp, fan_curve,
+ FAN_CURVE_DEV_CPU, 5);
+static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point7_temp, fan_curve,
+ FAN_CURVE_DEV_CPU, 6);
+static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point8_temp, fan_curve,
+ FAN_CURVE_DEV_CPU, 7);
+
+static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point1_pwm, fan_curve,
+ FAN_CURVE_DEV_CPU | FAN_CURVE_PWM_MASK, 0);
+static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point2_pwm, fan_curve,
+ FAN_CURVE_DEV_CPU | FAN_CURVE_PWM_MASK, 1);
+static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point3_pwm, fan_curve,
+ FAN_CURVE_DEV_CPU | FAN_CURVE_PWM_MASK, 2);
+static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point4_pwm, fan_curve,
+ FAN_CURVE_DEV_CPU | FAN_CURVE_PWM_MASK, 3);
+static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point5_pwm, fan_curve,
+ FAN_CURVE_DEV_CPU | FAN_CURVE_PWM_MASK, 4);
+static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point6_pwm, fan_curve,
+ FAN_CURVE_DEV_CPU | FAN_CURVE_PWM_MASK, 5);
+static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point7_pwm, fan_curve,
+ FAN_CURVE_DEV_CPU | FAN_CURVE_PWM_MASK, 6);
+static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point8_pwm, fan_curve,
+ FAN_CURVE_DEV_CPU | FAN_CURVE_PWM_MASK, 7);
+
+/* GPU */
+static SENSOR_DEVICE_ATTR_RW(pwm2_enable, fan_curve_enable,
+ FAN_CURVE_DEV_GPU);
+static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point1_temp, fan_curve,
+ FAN_CURVE_DEV_GPU, 0);
+static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point2_temp, fan_curve,
+ FAN_CURVE_DEV_GPU, 1);
+static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point3_temp, fan_curve,
+ FAN_CURVE_DEV_GPU, 2);
+static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point4_temp, fan_curve,
+ FAN_CURVE_DEV_GPU, 3);
+static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point5_temp, fan_curve,
+ FAN_CURVE_DEV_GPU, 4);
+static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point6_temp, fan_curve,
+ FAN_CURVE_DEV_GPU, 5);
+static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point7_temp, fan_curve,
+ FAN_CURVE_DEV_GPU, 6);
+static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point8_temp, fan_curve,
+ FAN_CURVE_DEV_GPU, 7);
+
+static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point1_pwm, fan_curve,
+ FAN_CURVE_DEV_GPU | FAN_CURVE_PWM_MASK, 0);
+static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point2_pwm, fan_curve,
+ FAN_CURVE_DEV_GPU | FAN_CURVE_PWM_MASK, 1);
+static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point3_pwm, fan_curve,
+ FAN_CURVE_DEV_GPU | FAN_CURVE_PWM_MASK, 2);
+static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point4_pwm, fan_curve,
+ FAN_CURVE_DEV_GPU | FAN_CURVE_PWM_MASK, 3);
+static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point5_pwm, fan_curve,
+ FAN_CURVE_DEV_GPU | FAN_CURVE_PWM_MASK, 4);
+static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point6_pwm, fan_curve,
+ FAN_CURVE_DEV_GPU | FAN_CURVE_PWM_MASK, 5);
+static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point7_pwm, fan_curve,
+ FAN_CURVE_DEV_GPU | FAN_CURVE_PWM_MASK, 6);
+static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point8_pwm, fan_curve,
+ FAN_CURVE_DEV_GPU | FAN_CURVE_PWM_MASK, 7);
+
+static struct attribute *fan_curve_attributes[] = {
+ /* CPU */
+ &sensor_dev_attr_pwm1_enable.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point1_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point2_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point3_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point4_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point5_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point6_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point7_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point8_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point3_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point4_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point5_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point6_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point7_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point8_pwm.dev_attr.attr,
+ /* GPU */
+ &sensor_dev_attr_pwm2_enable.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_point1_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_point2_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_point3_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_point4_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_point5_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_point6_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_point7_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_point8_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_point3_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_point4_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_point5_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_point6_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_point7_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_point8_pwm.dev_attr.attr,
+ NULL
+};
+
+static umode_t fan_curve_sysfs_is_visible(struct kobject *kobj,
+ struct attribute *attr, int idx)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct asus_wmi *asus = dev_get_drvdata(dev->parent);
+
+ if (attr == &sensor_dev_attr_pwm1_auto_point1_temp.dev_attr.attr
+ || attr == &sensor_dev_attr_pwm1_auto_point2_temp.dev_attr.attr
+ || attr == &sensor_dev_attr_pwm1_auto_point3_temp.dev_attr.attr
+ || attr == &sensor_dev_attr_pwm1_auto_point4_temp.dev_attr.attr
+ || attr == &sensor_dev_attr_pwm1_auto_point5_temp.dev_attr.attr
+ || attr == &sensor_dev_attr_pwm1_auto_point6_temp.dev_attr.attr
+ || attr == &sensor_dev_attr_pwm1_auto_point7_temp.dev_attr.attr
+ || attr == &sensor_dev_attr_pwm1_auto_point8_temp.dev_attr.attr
+ || attr == &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr
+ || attr == &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr
+ || attr == &sensor_dev_attr_pwm1_auto_point3_pwm.dev_attr.attr
+ || attr == &sensor_dev_attr_pwm1_auto_point4_pwm.dev_attr.attr
+ || attr == &sensor_dev_attr_pwm1_auto_point5_pwm.dev_attr.attr
+ || attr == &sensor_dev_attr_pwm1_auto_point6_pwm.dev_attr.attr
+ || attr == &sensor_dev_attr_pwm1_auto_point7_pwm.dev_attr.attr
+ || attr == &sensor_dev_attr_pwm1_auto_point8_pwm.dev_attr.attr) {
+ if (!asus->cpu_fan_curve_available)
+ return 0;
+ }
+
+ if (attr == &sensor_dev_attr_pwm2_auto_point1_temp.dev_attr.attr
+ || attr == &sensor_dev_attr_pwm2_auto_point2_temp.dev_attr.attr
+ || attr == &sensor_dev_attr_pwm2_auto_point3_temp.dev_attr.attr
+ || attr == &sensor_dev_attr_pwm2_auto_point4_temp.dev_attr.attr
+ || attr == &sensor_dev_attr_pwm2_auto_point5_temp.dev_attr.attr
+ || attr == &sensor_dev_attr_pwm2_auto_point6_temp.dev_attr.attr
+ || attr == &sensor_dev_attr_pwm2_auto_point7_temp.dev_attr.attr
+ || attr == &sensor_dev_attr_pwm2_auto_point8_temp.dev_attr.attr
+ || attr == &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr
+ || attr == &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr
+ || attr == &sensor_dev_attr_pwm2_auto_point3_pwm.dev_attr.attr
+ || attr == &sensor_dev_attr_pwm2_auto_point4_pwm.dev_attr.attr
+ || attr == &sensor_dev_attr_pwm2_auto_point5_pwm.dev_attr.attr
+ || attr == &sensor_dev_attr_pwm2_auto_point6_pwm.dev_attr.attr
+ || attr == &sensor_dev_attr_pwm2_auto_point7_pwm.dev_attr.attr
+ || attr == &sensor_dev_attr_pwm2_auto_point8_pwm.dev_attr.attr) {
+ if (!asus->gpu_fan_curve_available)
+ return 0;
+ }
+
+ return attr->mode;
+}
+
+static const struct attribute_group fan_curve_attribute_group = {
+ .is_visible = fan_curve_sysfs_is_visible,
+ .attrs = fan_curve_attributes
+};
+__ATTRIBUTE_GROUPS(fan_curve_attribute);
+
+static int asus_wmi_fan_curve_init(struct asus_wmi *asus)
+{
+ struct device *dev = &asus->platform_device->dev;
+ struct device *hwmon;
+
+ hwmon = devm_hwmon_device_register_with_groups(dev, "asus", asus,
+ fan_curve_attribute_groups);
+
+ if (IS_ERR(hwmon)) {
+ pr_err("Could not register asus fan_curve device\n");
+ return PTR_ERR(hwmon);
+ }
+
+ return 0;
+}
+
/* Throttle thermal policy ****************************************************/
static int throttle_thermal_policy_check_present(struct asus_wmi *asus)
@@ -2053,8 +2592,8 @@ static int throttle_thermal_policy_check_present(struct asus_wmi *asus)
asus->throttle_thermal_policy_available = false;
err = asus_wmi_get_devstate(asus,
- ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY,
- &result);
+ ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY,
+ &result);
if (err) {
if (err == -ENODEV)
return 0;
@@ -2092,6 +2631,12 @@ static int throttle_thermal_policy_write(struct asus_wmi *asus)
return -EIO;
}
+ if (asus->cpu_fan_curve_available || asus->gpu_fan_curve_available) {
+ err = fan_curve_write_data(asus);
+ if (err)
+ return err;
+ }
+
return 0;
}
@@ -2904,7 +3449,7 @@ static int show_call(struct seq_file *m, void *data)
if (ACPI_FAILURE(status))
return -EIO;
- obj = (union acpi_object *)output.pointer;
+ obj = output.pointer;
if (obj && obj->type == ACPI_TYPE_INTEGER)
seq_printf(m, "%#x(%#x, %#x) = %#x\n", asus->debug.method_id,
asus->debug.dev_id, asus->debug.ctrl_param,
@@ -3016,6 +3561,16 @@ static int asus_wmi_add(struct platform_device *pdev)
else
throttle_thermal_policy_set_default(asus);
+ err = custom_fan_check_present(asus, &asus->cpu_fan_curve_available,
+ ASUS_WMI_DEVID_CPU_FAN_CURVE);
+ if (err)
+ goto fail_custom_fan_curve;
+
+ err = custom_fan_check_present(asus, &asus->gpu_fan_curve_available,
+ ASUS_WMI_DEVID_GPU_FAN_CURVE);
+ if (err)
+ goto fail_custom_fan_curve;
+
err = platform_profile_setup(asus);
if (err)
goto fail_platform_profile_setup;
@@ -3038,6 +3593,10 @@ static int asus_wmi_add(struct platform_device *pdev)
if (err)
goto fail_hwmon;
+ err = asus_wmi_fan_curve_init(asus);
+ if (err)
+ goto fail_custom_fan_curve;
+
err = asus_wmi_led_init(asus);
if (err)
goto fail_leds;
@@ -3109,6 +3668,7 @@ static int asus_wmi_add(struct platform_device *pdev)
asus_wmi_sysfs_exit(asus->platform_device);
fail_sysfs:
fail_throttle_thermal_policy:
+fail_custom_fan_curve:
fail_platform_profile_setup:
if (asus->platform_profile_support)
platform_profile_remove();
diff --git a/include/linux/platform_data/x86/asus-wmi.h b/include/linux/platform_data/x86/asus-wmi.h
index 17dc5cb6f3f2..a571b47ff362 100644
--- a/include/linux/platform_data/x86/asus-wmi.h
+++ b/include/linux/platform_data/x86/asus-wmi.h
@@ -77,6 +77,8 @@
#define ASUS_WMI_DEVID_THERMAL_CTRL 0x00110011
#define ASUS_WMI_DEVID_FAN_CTRL 0x00110012 /* deprecated */
#define ASUS_WMI_DEVID_CPU_FAN_CTRL 0x00110013
+#define ASUS_WMI_DEVID_CPU_FAN_CURVE 0x00110024
+#define ASUS_WMI_DEVID_GPU_FAN_CURVE 0x00110025
/* Power */
#define ASUS_WMI_DEVID_PROCESSOR_STATE 0x00120012
--
2.31.1
