From: Kate Hsuan <hpa@xxxxxxxxxx>
Move Intel Turbo Max 3 driver to intel sub-directory to improve readability
and rename it from intel_turbo_max_3.c to turbo_max_3.c.
Signed-off-by: Kate Hsuan <hpa@xxxxxxxxxx>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
Reviewed-by: Hans de Goede <hdegoede@xxxxxxxxxx>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
drivers/platform/x86/Kconfig | 10 ----------
drivers/platform/x86/Makefile | 1 -
drivers/platform/x86/intel/Kconfig | 11 +++++++++++
drivers/platform/x86/intel/Makefile | 2 ++
.../x86/{intel_turbo_max_3.c => intel/turbo_max_3.c} | 0
5 files changed, 13 insertions(+), 11 deletions(-)
rename drivers/platform/x86/{intel_turbo_max_3.c => intel/turbo_max_3.c} (100%)
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 709f990243b6..0c645fcb09c5 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -1112,16 +1112,6 @@ config INTEL_IPS
source "drivers/platform/x86/intel_speed_select_if/Kconfig"
-config INTEL_TURBO_MAX_3
- bool "Intel Turbo Boost Max Technology 3.0 enumeration driver"
- depends on X86_64 && SCHED_MC_PRIO
- help
- This driver reads maximum performance ratio of each CPU and set up
- the scheduler priority metrics. In this way scheduler can prefer
- CPU with higher performance to schedule tasks.
- This driver is only required when the system is not using Hardware
- P-States (HWP). In HWP mode, priority can be read from ACPI tables.
-
config INTEL_UNCORE_FREQ_CONTROL
tristate "Intel Uncore frequency control driver"
depends on X86_64
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index c0d367455c7a..531cdac793d8 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -121,7 +121,6 @@ obj-$(CONFIG_WIRELESS_HOTKEY) += wireless-hotkey.o
# Intel uncore drivers
obj-$(CONFIG_INTEL_IPS) += intel_ips.o
obj-$(CONFIG_INTEL_SPEED_SELECT_INTERFACE) += intel_speed_select_if/
-obj-$(CONFIG_INTEL_TURBO_MAX_3) += intel_turbo_max_3.o
obj-$(CONFIG_INTEL_UNCORE_FREQ_CONTROL) += intel-uncore-frequency.o
# Intel PMIC / PMC / P-Unit devices
diff --git a/drivers/platform/x86/intel/Kconfig b/drivers/platform/x86/intel/Kconfig
index 39494a8b6a05..ccaaf93717bd 100644
--- a/drivers/platform/x86/intel/Kconfig
+++ b/drivers/platform/x86/intel/Kconfig
@@ -92,4 +92,15 @@ config INTEL_SMARTCONNECT
This driver checks to determine whether the device has Intel Smart
Connect enabled, and if so disables it.
+config INTEL_TURBO_MAX_3
+ bool "Intel Turbo Boost Max Technology 3.0 enumeration driver"
+ depends on X86_64 && SCHED_MC_PRIO
+ help
+ This driver reads maximum performance ratio of each CPU and set up
+ the scheduler priority metrics. In this way scheduler can prefer
+ CPU with higher performance to schedule tasks.
+
+ This driver is only required when the system is not using Hardware
+ P-States (HWP). In HWP mode, priority can be read from ACPI tables.
+
endif # X86_PLATFORM_DRIVERS_INTEL
diff --git a/drivers/platform/x86/intel/Makefile b/drivers/platform/x86/intel/Makefile
index a62f593b90fa..ffeeecd513d8 100644
--- a/drivers/platform/x86/intel/Makefile
+++ b/drivers/platform/x86/intel/Makefile
@@ -27,3 +27,5 @@ intel-rst-y := rst.o
obj-$(CONFIG_INTEL_RST) += intel-rst.o
intel-smartconnect-y := smartconnect.o
obj-$(CONFIG_INTEL_SMARTCONNECT) += intel-smartconnect.o
+intel_turbo_max_3-y := turbo_max_3.o
+obj-$(CONFIG_INTEL_TURBO_MAX_3) += intel_turbo_max_3.o
diff --git a/drivers/platform/x86/intel_turbo_max_3.c b/drivers/platform/x86/intel/turbo_max_3.c
similarity index 100%
rename from drivers/platform/x86/intel_turbo_max_3.c
rename to drivers/platform/x86/intel/turbo_max_3.c
--
2.32.0
