Move intel_atomisp2_led to intel sub-directory to improve
readability.
Signed-off-by: Kate Hsuan <hpa@xxxxxxxxxx>
---
drivers/platform/x86/Kconfig | 34 ------------------
drivers/platform/x86/Makefile | 2 --
drivers/platform/x86/intel/Kconfig | 1 +
drivers/platform/x86/intel/Makefile | 2 ++
drivers/platform/x86/intel/atomisp2/Kconfig | 35 +++++++++++++++++++
drivers/platform/x86/intel/atomisp2/Makefile | 5 +++
.../atomisp2/led.c} | 0
.../atomisp2/pm.c} | 0
8 files changed, 43 insertions(+), 36 deletions(-)
create mode 100644 drivers/platform/x86/intel/atomisp2/Kconfig
create mode 100644 drivers/platform/x86/intel/atomisp2/Makefile
rename drivers/platform/x86/{intel_atomisp2_led.c => intel/atomisp2/led.c} (100%)
rename drivers/platform/x86/{intel_atomisp2_pm.c => intel/atomisp2/pm.c} (100%)
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index b864e37c6781..ac4ec4e2534a 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -667,40 +667,6 @@ config THINKPAD_LMI
source "drivers/platform/x86/intel/Kconfig"
-config INTEL_ATOMISP2_LED
- tristate "Intel AtomISP2 camera LED driver"
- depends on GPIOLIB && LEDS_GPIO
- help
- Many Bay Trail and Cherry Trail devices come with a camera attached
- to Intel's Image Signal Processor. Linux currently does not have a
- driver for these, so they do not work as a camera. Some of these
- camera's have a LED which is controlled through a GPIO.
-
- Some of these devices have a firmware issue where the LED gets turned
- on at boot. This driver will turn the LED off at boot and also allows
- controlling the LED (repurposing it) through the sysfs LED interface.
-
- Which GPIO is attached to the LED is usually not described in the
- ACPI tables, so this driver contains per-system info about the GPIO
- inside the driver, this means that this driver only works on systems
- the driver knows about.
-
- To compile this driver as a module, choose M here: the module
- will be called intel_atomisp2_led.
-
-config INTEL_ATOMISP2_PM
- tristate "Intel AtomISP2 dummy / power-management driver"
- depends on PCI && IOSF_MBI && PM
- depends on !INTEL_ATOMISP
- help
- Power-management driver for Intel's Image Signal Processor found on
- Bay Trail and Cherry Trail devices. This dummy driver's sole purpose
- is to turn the ISP off (put it in D3) to save power and to allow
- entering of S0ix modes.
-
- To compile this driver as a module, choose M here: the module
- will be called intel_atomisp2_pm.
-
config INTEL_HID_EVENT
tristate "INTEL HID Event"
depends on ACPI
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index f30cee767252..b5327b6f774a 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -71,8 +71,6 @@ obj-$(CONFIG_THINKPAD_LMI) += think-lmi.o
# Intel
obj-$(CONFIG_X86_PLATFORM_DRIVERS_INTEL) += intel/
-obj-$(CONFIG_INTEL_ATOMISP2_LED) += intel_atomisp2_led.o
-obj-$(CONFIG_INTEL_ATOMISP2_PM) += intel_atomisp2_pm.o
obj-$(CONFIG_INTEL_HID_EVENT) += intel-hid.o
obj-$(CONFIG_INTEL_INT0002_VGPIO) += intel_int0002_vgpio.o
obj-$(CONFIG_INTEL_MENLOW) += intel_menlow.o
diff --git a/drivers/platform/x86/intel/Kconfig b/drivers/platform/x86/intel/Kconfig
index 01c73d184461..443554133f20 100644
--- a/drivers/platform/x86/intel/Kconfig
+++ b/drivers/platform/x86/intel/Kconfig
@@ -19,6 +19,7 @@ if X86_PLATFORM_DRIVERS_INTEL
source "drivers/platform/x86/intel/int33fe/Kconfig"
source "drivers/platform/x86/intel/int3472/Kconfig"
source "drivers/platform/x86/intel/pmt/Kconfig"
+source "drivers/platform/x86/intel/atomisp2/Kconfig"
config INTEL_BXTWC_PMIC_TMU
tristate "Intel BXT Whiskey Cove TMU Driver"
diff --git a/drivers/platform/x86/intel/Makefile b/drivers/platform/x86/intel/Makefile
index ae2a3cec8d82..fd2d274f294f 100644
--- a/drivers/platform/x86/intel/Makefile
+++ b/drivers/platform/x86/intel/Makefile
@@ -7,6 +7,8 @@
obj-$(CONFIG_INTEL_CHT_INT33FE) += int33fe/
obj-$(CONFIG_INTEL_SKL_INT3472) += int3472/
obj-$(CONFIG_INTEL_PMT_CLASS) += pmt/
+obj-$(CONFIG_INTEL_ATOMISP2_LED) += atomisp2/
+obj-$(CONFIG_INTEL_ATOMISP2_PM) += atomisp2/
# Intel PMIC / PMC / P-Unit devices
intel_bxtwc_tmu-y := bxtwc_tmu.o
diff --git a/drivers/platform/x86/intel/atomisp2/Kconfig b/drivers/platform/x86/intel/atomisp2/Kconfig
new file mode 100644
index 000000000000..49305b8605fe
--- /dev/null
+++ b/drivers/platform/x86/intel/atomisp2/Kconfig
@@ -0,0 +1,35 @@
+
+config INTEL_ATOMISP2_LED
+ tristate "Intel AtomISP2 camera LED driver"
+ depends on GPIOLIB && LEDS_GPIO
+ help
+ Many Bay Trail and Cherry Trail devices come with a camera attached
+ to Intel's Image Signal Processor. Linux currently does not have a
+ driver for these, so they do not work as a camera. Some of these
+ camera's have a LED which is controlled through a GPIO.
+
+ Some of these devices have a firmware issue where the LED gets turned
+ on at boot. This driver will turn the LED off at boot and also allows
+ controlling the LED (repurposing it) through the sysfs LED interface.
+
+ Which GPIO is attached to the LED is usually not described in the
+ ACPI tables, so this driver contains per-system info about the GPIO
+ inside the driver, this means that this driver only works on systems
+ the driver knows about.
+
+ To compile this driver as a module, choose M here: the module
+ will be called intel_atomisp2_led.
+
+config INTEL_ATOMISP2_PM
+ tristate "Intel AtomISP2 dummy / power-management driver"
+ depends on PCI && IOSF_MBI && PM
+ depends on !INTEL_ATOMISP
+ help
+ Power-management driver for Intel's Image Signal Processor found on
+ Bay Trail and Cherry Trail devices. This dummy driver's sole purpose
+ is to turn the ISP off (put it in D3) to save power and to allow
+ entering of S0ix modes.
+
+ To compile this driver as a module, choose M here: the module
+ will be called intel_atomisp2_pm.
+
diff --git a/drivers/platform/x86/intel/atomisp2/Makefile b/drivers/platform/x86/intel/atomisp2/Makefile
new file mode 100644
index 000000000000..6937ff24861e
--- /dev/null
+++ b/drivers/platform/x86/intel/atomisp2/Makefile
@@ -0,0 +1,5 @@
+
+intel_atomisp2_led-y := led.o
+obj-$(CONFIG_INTEL_ATOMISP2_LED) += intel_atomisp2_led.o
+intel_atomisp2_pm-y += pm.o
+obj-$(CONFIG_INTEL_ATOMISP2_PM) += intel_atomisp2_pm.o
diff --git a/drivers/platform/x86/intel_atomisp2_led.c b/drivers/platform/x86/intel/atomisp2/led.c
similarity index 100%
rename from drivers/platform/x86/intel_atomisp2_led.c
rename to drivers/platform/x86/intel/atomisp2/led.c
diff --git a/drivers/platform/x86/intel_atomisp2_pm.c b/drivers/platform/x86/intel/atomisp2/pm.c
similarity index 100%
rename from drivers/platform/x86/intel_atomisp2_pm.c
rename to drivers/platform/x86/intel/atomisp2/pm.c
--
2.31.1
