On Mon, Aug 9, 2021 at 7:22 AM Andy Shevchenko
<andy.shevchenko@xxxxxxxxx> wrote:
>
> On Mon, Aug 9, 2021 at 3:13 PM Chris Blake <chrisrblake93@xxxxxxxxx> wrote:
> >
> > This adds platform support for the Cisco Meraki MX100 (Tinkerbell)
> > network appliance. This sets up the network LEDs and Reset
> > button.
>
> Almost good to me, see below for some comments. After addressing them
> Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
>
>
> > Depends-on: ef0eea5b151ae ("mfd: lpc_ich: Enable GPIO driver for DH89xxCC")
> > Co-developed-by: Christian Lamparter <chunkeey@xxxxxxxxx>
> > Signed-off-by: Christian Lamparter <chunkeey@xxxxxxxxx>
> > Signed-off-by: Chris Blake <chrisrblake93@xxxxxxxxx>
> > ---
> >
> > Changelog:
> > V3: Additional cleanups, formatting changes
> > V2: Move to using gpiod lookup tables, misc cleanups
> > V1: Initial Patch
> >
> > drivers/platform/x86/Kconfig | 13 ++
> > drivers/platform/x86/Makefile | 3 +
> > drivers/platform/x86/meraki-mx100.c | 202 ++++++++++++++++++++++++++++
> > 3 files changed, 218 insertions(+)
> > create mode 100644 drivers/platform/x86/meraki-mx100.c
> >
> > diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
> > index 7d385c3b2239..8d70176e335f 100644
> > --- a/drivers/platform/x86/Kconfig
> > +++ b/drivers/platform/x86/Kconfig
> > @@ -302,6 +302,19 @@ config ASUS_NB_WMI
> > If you have an ACPI-WMI compatible Asus Notebook, say Y or M
> > here.
> >
> > +config MERAKI_MX100
> > + tristate "Cisco Meraki MX100 Platform Driver"
> > + depends on GPIOLIB
> > + depends on GPIO_ICH
> > + depends on LEDS_CLASS
> > + select LEDS_GPIO
> > + help
> > + This driver provides support for the front button and LEDs on
> > + the Cisco Meraki MX100 (Tinkerbell) 1U appliance.
> > +
> > + To compile this driver as a module, choose M here: the module
> > + will be called meraki-mx100.
> > +
> > config EEEPC_LAPTOP
> > tristate "Eee PC Hotkey Driver"
> > depends on ACPI
> > diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
> > index 7ee369aab10d..25c5aee1cde7 100644
> > --- a/drivers/platform/x86/Makefile
> > +++ b/drivers/platform/x86/Makefile
> > @@ -39,6 +39,9 @@ obj-$(CONFIG_ASUS_NB_WMI) += asus-nb-wmi.o
> > obj-$(CONFIG_EEEPC_LAPTOP) += eeepc-laptop.o
> > obj-$(CONFIG_EEEPC_WMI) += eeepc-wmi.o
> >
> > +# Cisco/Meraki
> > +obj-$(CONFIG_MERAKI_MX100) += meraki-mx100.o
> > +
> > # Dell
> > obj-$(CONFIG_X86_PLATFORM_DRIVERS_DELL) += dell/
> >
> > diff --git a/drivers/platform/x86/meraki-mx100.c b/drivers/platform/x86/meraki-mx100.c
> > new file mode 100644
> > index 000000000000..eebbd0a3d806
> > --- /dev/null
> > +++ b/drivers/platform/x86/meraki-mx100.c
> > @@ -0,0 +1,202 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +
> > +/*
> > + * Cisco Meraki MX100 (Tinkerbell) board platform driver
> > + *
> > + * Based off of arch/x86/platform/meraki/tink.c from the
> > + * Meraki GPL release meraki-firmware-sources-r23-20150601
> > + *
> > + * Format inspired by platform/x86/pcengines-apuv2.c
> > + *
> > + * Copyright (C) 2021 Chris Blake <chrisrblake93@xxxxxxxxx>
> > + */
> > +
> > +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> > +
> > +#include <linux/dmi.h>
> > +#include <linux/err.h>
> > +#include <linux/gpio_keys.h>
> > +#include <linux/gpio/machine.h>
> > +#include <linux/input.h>
> > +#include <linux/io.h>
> > +#include <linux/kernel.h>
> > +#include <linux/leds.h>
> > +#include <linux/module.h>
> > +#include <linux/platform_device.h>
> > +
> > +#define TINK_GPIO_DRIVER_NAME "gpio_ich"
> > +
> > +/* LEDs */
> > +static const struct gpio_led tink_leds[] = {
> > + {
> > + .name = "mx100:green:internet",
> > + .default_trigger = "default-on",
> > + },
> > + {
> > + .name = "mx100:green:lan2",
> > + },
> > + {
> > + .name = "mx100:green:lan3",
> > + },
> > + {
> > + .name = "mx100:green:lan4",
> > + },
> > + {
> > + .name = "mx100:green:lan5",
> > + },
> > + {
> > + .name = "mx100:green:lan6",
> > + },
> > + {
> > + .name = "mx100:green:lan7",
> > + },
> > + {
> > + .name = "mx100:green:lan8",
> > + },
> > + {
> > + .name = "mx100:green:lan9",
> > + },
> > + {
> > + .name = "mx100:green:lan10",
> > + },
> > + {
> > + .name = "mx100:green:lan11",
> > + },
> > +};
> > +
> > +static const struct gpio_led_platform_data tink_leds_pdata = {
> > + .num_leds = ARRAY_SIZE(tink_leds),
> > + .leds = tink_leds,
> > +};
> > +
> > +static struct gpiod_lookup_table tink_leds_table = {
> > + .dev_id = "leds-gpio",
> > + .table = {
> > + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 11,
> > + NULL, 0, GPIO_ACTIVE_LOW),
> > + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 18,
> > + NULL, 1, GPIO_ACTIVE_HIGH),
> > + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 20,
> > + NULL, 2, GPIO_ACTIVE_HIGH),
> > + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 22,
> > + NULL, 3, GPIO_ACTIVE_HIGH),
> > + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 23,
> > + NULL, 4, GPIO_ACTIVE_HIGH),
> > + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 32,
> > + NULL, 5, GPIO_ACTIVE_HIGH),
> > + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 34,
> > + NULL, 6, GPIO_ACTIVE_HIGH),
> > + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 35,
> > + NULL, 7, GPIO_ACTIVE_HIGH),
> > + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 36,
> > + NULL, 8, GPIO_ACTIVE_HIGH),
> > + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 37,
> > + NULL, 9, GPIO_ACTIVE_HIGH),
> > + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 48,
> > + NULL, 10, GPIO_ACTIVE_HIGH),
> > + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 16,
> > + NULL, 11, GPIO_ACTIVE_LOW),
> > + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 7,
> > + NULL, 12, GPIO_ACTIVE_LOW),
> > + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 21,
> > + NULL, 13, GPIO_ACTIVE_LOW),
> > + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 19,
> > + NULL, 14, GPIO_ACTIVE_LOW),
> > + {} /* Terminating entry */
> > + }
> > +};
> > +
> > +/* Reset Button */
> > +static struct gpio_keys_button tink_buttons[] = {
> > + {
> > + .desc = "Reset",
> > + .type = EV_KEY,
> > + .code = KEY_RESTART,
> > + .active_low = 1,
> > + .debounce_interval = 100,
> > + },
> > +};
> > +
> > +static const struct gpio_keys_platform_data tink_buttons_pdata = {
> > + .buttons = tink_buttons,
> > + .nbuttons = ARRAY_SIZE(tink_buttons),
> > + .poll_interval = 20,
> > + .rep = 0,
> > + .name = "mx100-keys",
> > +};
> > +
> > +static struct gpiod_lookup_table tink_keys_table = {
> > + .dev_id = "gpio-keys-polled",
> > + .table = {
> > + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 60,
> > + NULL, 0, GPIO_ACTIVE_LOW),
> > + {} /* Terminating entry */
> > + }
> > +};
> > +
> > +/* Board setup */
> > +static const struct dmi_system_id tink_systems[] __initconst = {
> > + {
> > + .matches = {
> > + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Cisco"),
> > + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "MX100-HW"),
> > + },
> > + },
> > + {} /* Terminating entry */
> > +};
> > +MODULE_DEVICE_TABLE(dmi, tink_systems);
> > +
> > +static struct platform_device *tink_leds_pdev;
> > +static struct platform_device *tink_keys_pdev;
> > +
> > +static struct platform_device * __init tink_create_dev(
> > + const char *name, const void *pdata, size_t sz)
> > +{
> > + struct platform_device *pdev;
> > +
> > + pdev = platform_device_register_data(NULL,
> > + name, PLATFORM_DEVID_NONE, pdata, sz);
> > + if (IS_ERR(pdev))
> > + pr_err("failed registering %s: %ld\n", name, PTR_ERR(pdev));
> > +
> > + return pdev;
> > +}
> > +
> > +static int __init tink_board_init(void)
> > +{
> > + if (!dmi_first_match(tink_systems))
> > + return -ENODEV;
> > +
> > + /*
> > + * We need to make sure that GPIO60 isn't set to native mode as is default since it's our
> > + * Reset Button. To do this, write to GPIO_USE_SEL2 to have GPIO60 set to GPIO mode.
> > + * This is documented on page 1609 of the PCH datasheet, order number 327879-005US
> > + */
> > + outl(inl(0x530) | BIT(28), 0x530);
> > +
> > + gpiod_add_lookup_table(&tink_leds_table);
> > + gpiod_add_lookup_table(&tink_keys_table);
> > +
> > + tink_leds_pdev = tink_create_dev("leds-gpio",
> > + &tink_leds_pdata, sizeof(tink_leds_pdata));
>
> Seems you forgot to add
> if (IS_ERR())
> return PTR_ERR();
>
> here...
>
> > + tink_keys_pdev = tink_create_dev("gpio-keys-polled",
> > + &tink_buttons_pdata, sizeof(tink_buttons_pdata));
>
> and
>
> if (IS_ERR()) {
> pdev_unreg();
> return PTR_ERR();
> }
>
> here.
>
Are these IS_ERR catches needed since they are done in the
tink_create_dev struct? This is the same structure as currently done
in drivers/platform/x86/pcengines-apuv2.c. Adding these 2x additions
feels a bit redundant, but if I am wrong please correct me.
> > + return 0;
> > +}
> > +module_init(tink_board_init);
> > +
> > +static void __exit tink_board_exit(void)
> > +{
> > + platform_device_unregister(tink_keys_pdev);
> > + platform_device_unregister(tink_leds_pdev);
> > + gpiod_remove_lookup_table(&tink_keys_table);
> > + gpiod_remove_lookup_table(&tink_leds_table);
> > +}
> > +module_exit(tink_board_exit);
> > +
> > +MODULE_AUTHOR("Chris Blake <chrisrblake93@xxxxxxxxx>");
> > +MODULE_DESCRIPTION("Cisco Meraki MX100 Platform Driver");
> > +MODULE_LICENSE("GPL");
> > +MODULE_ALIAS("platform:meraki-mx100");
> > --
> > 2.25.1
> >
>
>
> --
> With Best Regards,
> Andy Shevchenko
