On Mon, Aug 9, 2021 at 7:13 AM Chris Blake <chrisrblake93@xxxxxxxxx> wrote:
>
> This adds platform support for the Cisco Meraki MX100 (Tinkerbell)
> network appliance. This sets up the network LEDs and Reset
> button.
>
> Depends-on: ef0eea5b151ae ("mfd: lpc_ich: Enable GPIO driver for DH89xxCC")
> Co-developed-by: Christian Lamparter <chunkeey@xxxxxxxxx>
> Signed-off-by: Christian Lamparter <chunkeey@xxxxxxxxx>
> Signed-off-by: Chris Blake <chrisrblake93@xxxxxxxxx>
> ---
>
> Changelog:
> V3: Additional cleanups, formatting changes
> V2: Move to using gpiod lookup tables, misc cleanups
> V1: Initial Patch
>
> drivers/platform/x86/Kconfig | 13 ++
> drivers/platform/x86/Makefile | 3 +
> drivers/platform/x86/meraki-mx100.c | 202 ++++++++++++++++++++++++++++
> 3 files changed, 218 insertions(+)
> create mode 100644 drivers/platform/x86/meraki-mx100.c
>
> diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
> index 7d385c3b2239..8d70176e335f 100644
> --- a/drivers/platform/x86/Kconfig
> +++ b/drivers/platform/x86/Kconfig
> @@ -302,6 +302,19 @@ config ASUS_NB_WMI
> If you have an ACPI-WMI compatible Asus Notebook, say Y or M
> here.
>
> +config MERAKI_MX100
> + tristate "Cisco Meraki MX100 Platform Driver"
> + depends on GPIOLIB
> + depends on GPIO_ICH
> + depends on LEDS_CLASS
> + select LEDS_GPIO
> + help
> + This driver provides support for the front button and LEDs on
> + the Cisco Meraki MX100 (Tinkerbell) 1U appliance.
> +
> + To compile this driver as a module, choose M here: the module
> + will be called meraki-mx100.
> +
> config EEEPC_LAPTOP
> tristate "Eee PC Hotkey Driver"
> depends on ACPI
> diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
> index 7ee369aab10d..25c5aee1cde7 100644
> --- a/drivers/platform/x86/Makefile
> +++ b/drivers/platform/x86/Makefile
> @@ -39,6 +39,9 @@ obj-$(CONFIG_ASUS_NB_WMI) += asus-nb-wmi.o
> obj-$(CONFIG_EEEPC_LAPTOP) += eeepc-laptop.o
> obj-$(CONFIG_EEEPC_WMI) += eeepc-wmi.o
>
> +# Cisco/Meraki
> +obj-$(CONFIG_MERAKI_MX100) += meraki-mx100.o
> +
> # Dell
> obj-$(CONFIG_X86_PLATFORM_DRIVERS_DELL) += dell/
>
> diff --git a/drivers/platform/x86/meraki-mx100.c b/drivers/platform/x86/meraki-mx100.c
> new file mode 100644
> index 000000000000..eebbd0a3d806
> --- /dev/null
> +++ b/drivers/platform/x86/meraki-mx100.c
> @@ -0,0 +1,202 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +
> +/*
> + * Cisco Meraki MX100 (Tinkerbell) board platform driver
> + *
> + * Based off of arch/x86/platform/meraki/tink.c from the
> + * Meraki GPL release meraki-firmware-sources-r23-20150601
> + *
> + * Format inspired by platform/x86/pcengines-apuv2.c
> + *
> + * Copyright (C) 2021 Chris Blake <chrisrblake93@xxxxxxxxx>
> + */
> +
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> +#include <linux/dmi.h>
> +#include <linux/err.h>
> +#include <linux/gpio_keys.h>
> +#include <linux/gpio/machine.h>
> +#include <linux/input.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/leds.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +
> +#define TINK_GPIO_DRIVER_NAME "gpio_ich"
> +
> +/* LEDs */
> +static const struct gpio_led tink_leds[] = {
> + {
> + .name = "mx100:green:internet",
> + .default_trigger = "default-on",
> + },
> + {
> + .name = "mx100:green:lan2",
> + },
> + {
> + .name = "mx100:green:lan3",
> + },
> + {
> + .name = "mx100:green:lan4",
> + },
> + {
> + .name = "mx100:green:lan5",
> + },
> + {
> + .name = "mx100:green:lan6",
> + },
> + {
> + .name = "mx100:green:lan7",
> + },
> + {
> + .name = "mx100:green:lan8",
> + },
> + {
> + .name = "mx100:green:lan9",
> + },
> + {
> + .name = "mx100:green:lan10",
> + },
> + {
> + .name = "mx100:green:lan11",
> + },
> +};
> +
> +static const struct gpio_led_platform_data tink_leds_pdata = {
> + .num_leds = ARRAY_SIZE(tink_leds),
> + .leds = tink_leds,
> +};
> +
> +static struct gpiod_lookup_table tink_leds_table = {
> + .dev_id = "leds-gpio",
> + .table = {
> + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 11,
> + NULL, 0, GPIO_ACTIVE_LOW),
> + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 18,
> + NULL, 1, GPIO_ACTIVE_HIGH),
> + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 20,
> + NULL, 2, GPIO_ACTIVE_HIGH),
> + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 22,
> + NULL, 3, GPIO_ACTIVE_HIGH),
> + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 23,
> + NULL, 4, GPIO_ACTIVE_HIGH),
> + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 32,
> + NULL, 5, GPIO_ACTIVE_HIGH),
> + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 34,
> + NULL, 6, GPIO_ACTIVE_HIGH),
> + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 35,
> + NULL, 7, GPIO_ACTIVE_HIGH),
> + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 36,
> + NULL, 8, GPIO_ACTIVE_HIGH),
> + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 37,
> + NULL, 9, GPIO_ACTIVE_HIGH),
> + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 48,
> + NULL, 10, GPIO_ACTIVE_HIGH),
> + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 16,
> + NULL, 11, GPIO_ACTIVE_LOW),
> + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 7,
> + NULL, 12, GPIO_ACTIVE_LOW),
> + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 21,
> + NULL, 13, GPIO_ACTIVE_LOW),
> + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 19,
> + NULL, 14, GPIO_ACTIVE_LOW),
> + {} /* Terminating entry */
> + }
> +};
> +
> +/* Reset Button */
> +static struct gpio_keys_button tink_buttons[] = {
> + {
> + .desc = "Reset",
> + .type = EV_KEY,
> + .code = KEY_RESTART,
> + .active_low = 1,
> + .debounce_interval = 100,
> + },
> +};
> +
> +static const struct gpio_keys_platform_data tink_buttons_pdata = {
> + .buttons = tink_buttons,
> + .nbuttons = ARRAY_SIZE(tink_buttons),
> + .poll_interval = 20,
> + .rep = 0,
> + .name = "mx100-keys",
> +};
> +
> +static struct gpiod_lookup_table tink_keys_table = {
> + .dev_id = "gpio-keys-polled",
> + .table = {
> + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 60,
> + NULL, 0, GPIO_ACTIVE_LOW),
> + {} /* Terminating entry */
> + }
> +};
> +
> +/* Board setup */
> +static const struct dmi_system_id tink_systems[] __initconst = {
> + {
> + .matches = {
> + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Cisco"),
> + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "MX100-HW"),
> + },
> + },
> + {} /* Terminating entry */
> +};
> +MODULE_DEVICE_TABLE(dmi, tink_systems);
> +
> +static struct platform_device *tink_leds_pdev;
> +static struct platform_device *tink_keys_pdev;
> +
> +static struct platform_device * __init tink_create_dev(
> + const char *name, const void *pdata, size_t sz)
> +{
> + struct platform_device *pdev;
> +
> + pdev = platform_device_register_data(NULL,
> + name, PLATFORM_DEVID_NONE, pdata, sz);
> + if (IS_ERR(pdev))
> + pr_err("failed registering %s: %ld\n", name, PTR_ERR(pdev));
> +
> + return pdev;
> +}
> +
> +static int __init tink_board_init(void)
> +{
> + if (!dmi_first_match(tink_systems))
> + return -ENODEV;
> +
> + /*
> + * We need to make sure that GPIO60 isn't set to native mode as is default since it's our
> + * Reset Button. To do this, write to GPIO_USE_SEL2 to have GPIO60 set to GPIO mode.
> + * This is documented on page 1609 of the PCH datasheet, order number 327879-005US
> + */
> + outl(inl(0x530) | BIT(28), 0x530);
> +
> + gpiod_add_lookup_table(&tink_leds_table);
> + gpiod_add_lookup_table(&tink_keys_table);
> +
> + tink_leds_pdev = tink_create_dev("leds-gpio",
> + &tink_leds_pdata, sizeof(tink_leds_pdata));
> +
> + tink_keys_pdev = tink_create_dev("gpio-keys-polled",
> + &tink_buttons_pdata, sizeof(tink_buttons_pdata));
> +
> + return 0;
> +}
> +module_init(tink_board_init);
> +
> +static void __exit tink_board_exit(void)
> +{
> + platform_device_unregister(tink_keys_pdev);
> + platform_device_unregister(tink_leds_pdev);
> + gpiod_remove_lookup_table(&tink_keys_table);
> + gpiod_remove_lookup_table(&tink_leds_table);
> +}
> +module_exit(tink_board_exit);
> +
> +MODULE_AUTHOR("Chris Blake <chrisrblake93@xxxxxxxxx>");
> +MODULE_DESCRIPTION("Cisco Meraki MX100 Platform Driver");
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("platform:meraki-mx100");
> --
> 2.25.1
>
Please do not merge, I just realized I forgot to add in 2x LEDs after
the move to gpiod lookup tables. Expect a V4 in the future.
Regards,
Chris B
