On Tue, Jul 6, 2021 at 1:47 PM Chris Blake <chrisrblake93@xxxxxxxxx> wrote:
>
> This adds platform support for the Cisco Meraki MX100 (Tinkerbell)
> network appliance. This sets up the network LEDs and Reset
> button. Note that this patch requires
> mfd: lpc_ich: Enable GPIO driver for DH89xxCC which has been accepted
> and is currently targeted for 5.15.
>
> Signed-off-by: Chris Blake <chrisrblake93@xxxxxxxxx>
> Co-developed-by: Christian Lamparter <chunkeey@xxxxxxxxx>
> ---
> drivers/platform/x86/Kconfig | 13 ++
> drivers/platform/x86/Makefile | 3 +
> drivers/platform/x86/meraki-mx100.c | 185 ++++++++++++++++++++++++++++
> 3 files changed, 201 insertions(+)
> create mode 100644 drivers/platform/x86/meraki-mx100.c
>
> diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
> index 7d385c3b2239..8d70176e335f 100644
> --- a/drivers/platform/x86/Kconfig
> +++ b/drivers/platform/x86/Kconfig
> @@ -302,6 +302,19 @@ config ASUS_NB_WMI
> If you have an ACPI-WMI compatible Asus Notebook, say Y or M
> here.
>
> +config MERAKI_MX100
> + tristate "Cisco Meraki MX100 Platform Driver"
> + depends on GPIOLIB
> + depends on GPIO_ICH
> + depends on LEDS_CLASS
> + select LEDS_GPIO
> + help
> + This driver provides support for the front button and LEDs on
> + the Cisco Meraki MX100 (Tinkerbell) 1U appliance.
> +
> + To compile this driver as a module, choose M here: the module
> + will be called meraki-mx100.
> +
> config EEEPC_LAPTOP
> tristate "Eee PC Hotkey Driver"
> depends on ACPI
> diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
> index 7ee369aab10d..25c5aee1cde7 100644
> --- a/drivers/platform/x86/Makefile
> +++ b/drivers/platform/x86/Makefile
> @@ -39,6 +39,9 @@ obj-$(CONFIG_ASUS_NB_WMI) += asus-nb-wmi.o
> obj-$(CONFIG_EEEPC_LAPTOP) += eeepc-laptop.o
> obj-$(CONFIG_EEEPC_WMI) += eeepc-wmi.o
>
> +# Cisco/Meraki
> +obj-$(CONFIG_MERAKI_MX100) += meraki-mx100.o
> +
> # Dell
> obj-$(CONFIG_X86_PLATFORM_DRIVERS_DELL) += dell/
>
> diff --git a/drivers/platform/x86/meraki-mx100.c b/drivers/platform/x86/meraki-mx100.c
> new file mode 100644
> index 000000000000..12b17ef06d14
> --- /dev/null
> +++ b/drivers/platform/x86/meraki-mx100.c
> @@ -0,0 +1,185 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +
> +/*
> + * Cisco Meraki MX100 (Tinkerbell) board platform driver
> + *
> + * Based off of arch/x86/platform/meraki/tink.c from the
> + * Meraki GPL release meraki-firmware-sources-r23-20150601
> + *
> + * Format inspired by platform/x86/pcengines-apuv2.c
> + *
> + * Copyright (C) 2021 Chris Blake <chrisrblake93@xxxxxxxxx>
> + */
> +
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> +#include <linux/dmi.h>
> +#include <linux/err.h>
> +#include <linux/gpio.h>
> +#include <linux/gpio_keys.h>
> +#include <linux/input.h>
> +#include <linux/kernel.h>
> +#include <linux/leds.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +
> +#define TINK_GPIO_OFFSET 436
> +
> +/* LEDs */
> +static const struct gpio_led tink_leds[] = {
> + {
> + .name = "mx100:green:internet",
> + .gpio = TINK_GPIO_OFFSET + 11,
> + .active_low = 1,
> + .default_trigger = "default-on",
> + },
> + {
> + .name = "mx100:green:lan2",
> + .gpio = TINK_GPIO_OFFSET + 18,
> + },
> + {
> + .name = "mx100:green:lan3",
> + .gpio = TINK_GPIO_OFFSET + 20,
> + },
> + {
> + .name = "mx100:green:lan4",
> + .gpio = TINK_GPIO_OFFSET + 22,
> + },
> + {
> + .name = "mx100:green:lan5",
> + .gpio = TINK_GPIO_OFFSET + 23,
> + },
> + {
> + .name = "mx100:green:lan6",
> + .gpio = TINK_GPIO_OFFSET + 32,
> + },
> + {
> + .name = "mx100:green:lan7",
> + .gpio = TINK_GPIO_OFFSET + 34,
> + },
> + {
> + .name = "mx100:green:lan8",
> + .gpio = TINK_GPIO_OFFSET + 35,
> + },
> + {
> + .name = "mx100:green:lan9",
> + .gpio = TINK_GPIO_OFFSET + 36,
> + },
> + {
> + .name = "mx100:green:lan10",
> + .gpio = TINK_GPIO_OFFSET + 37,
> + },
> + {
> + .name = "mx100:green:lan11",
> + .gpio = TINK_GPIO_OFFSET + 48,
> + },
> + {
> + .name = "mx100:green:ha",
> + .gpio = TINK_GPIO_OFFSET + 16,
> + .active_low = 1,
> + },
> + {
> + .name = "mx100:orange:ha",
> + .gpio = TINK_GPIO_OFFSET + 7,
> + .active_low = 1,
> + },
> + {
> + .name = "mx100:green:usb",
> + .gpio = TINK_GPIO_OFFSET + 21,
> + .active_low = 1,
> + },
> + {
> + .name = "mx100:orange:usb",
> + .gpio = TINK_GPIO_OFFSET + 19,
> + .active_low = 1,
> + },
> +};
> +
> +static const struct gpio_led_platform_data tink_leds_pdata = {
> + .num_leds = ARRAY_SIZE(tink_leds),
> + .leds = tink_leds,
> +};
> +
> +/* Reset Button */
> +static struct gpio_keys_button tink_buttons[] = {
> + {
> + .desc = "Reset",
> + .type = EV_KEY,
> + .code = KEY_RESTART,
> + .gpio = TINK_GPIO_OFFSET + 60,
> + .active_low = 1,
> + .debounce_interval = 100,
> + },
> +};
> +
> +static const struct gpio_keys_platform_data tink_buttons_pdata = {
> + .buttons = tink_buttons,
> + .nbuttons = ARRAY_SIZE(tink_buttons),
> + .poll_interval = 20,
> + .rep = 0,
> + .name = "mx100-keys",
> +};
> +
> +/* Board setup */
> +
> +static struct platform_device *tink_leds_pdev;
> +static struct platform_device *tink_keys_pdev;
> +
> +static struct platform_device * __init tink_create_dev(
> + const char *name,
> + const void *pdata,
> + size_t sz)
> +{
> + struct platform_device *pdev;
> +
> + pdev = platform_device_register_data(NULL,
> + name,
> + PLATFORM_DEVID_NONE,
> + pdata,
> + sz);
> +
> + if (IS_ERR(pdev))
> + pr_err("failed registering %s: %ld\n", name, PTR_ERR(pdev));
> +
> + return pdev;
> +}
> +
> +static int __init tink_board_init(void)
> +{
> + if (!dmi_match(DMI_SYS_VENDOR, "Cisco") || !dmi_match(DMI_PRODUCT_NAME, "MX100-HW")) {
> + return -ENODEV;
> + }
> +
> + /* We need to make sure that GPIO60 isn't set to native mode as is default since it's our
> + * Reset Button. To do this, write to GPIO_USE_SEL2 to have GPIO60 set to GPIO mode.
> + * This is documented on page 1609 of the PCH datasheet, order number 327879-005US
> + */
> + outl(inl(0x530) | BIT(28), 0x530);
> +
> + tink_leds_pdev = tink_create_dev(
> + "leds-gpio",
> + &tink_leds_pdata,
> + sizeof(tink_leds_pdata));
> +
> + tink_keys_pdev = tink_create_dev(
> + "gpio-keys-polled",
> + &tink_buttons_pdata,
> + sizeof(tink_buttons_pdata));
> +
> + return 0;
> +}
> +
> +static void __exit tink_board_exit(void)
> +{
> + platform_device_unregister(tink_keys_pdev);
> + platform_device_unregister(tink_leds_pdev);
> +}
> +
> +module_init(tink_board_init);
> +module_exit(tink_board_exit);
> +
> +MODULE_AUTHOR("Chris Blake <chrisrblake93@xxxxxxxxx>");
> +MODULE_DESCRIPTION("Cisco Meraki MX100 Platform Driver");
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("platform:meraki-mx100");
> +MODULE_SOFTDEP("pre: platform:gpio_ich platform:leds-gpio platform:gpio_keys_polled");
> --
> 2.25.1
>
Hello,
Just following up to see what is required to get this reviewed. Thanks!
Regards,
Chris B
