Hi Sumesh, Why this resend? You send the original v2 4 days ago, with a weekend in between and during the merge window. Please be patient when sending patches ande give people a chance to review the code before resending. Regards, Hans On 7/12/21 8:04 PM, sumesh.k.naduvalath@xxxxxxxxx wrote: > From: "K Naduvalath, Sumesh" <sumesh.k.naduvalath@xxxxxxxxx> > > This driver is for accessing the PSE (Programmable Service Engine), an > Embedded Controller like IP, using ISHTP (Integratd Sensor Hub Transport > Protocol) to get battery, thermal and UCSI (USB Type-C Connector System > Software Interface) related data from the platform. > > Signed-off-by: K Naduvalath, Sumesh <sumesh.k.naduvalath@xxxxxxxxx> > Reviewed-by: Mark Gross <mgross@xxxxxxxxxxxxxxx> > --- > Changes: > > v2: > -Decoupled ACPI device search with acpi_find_device() and cache adev > -Opregion context is protected with lock for both cmd and data handlers > -Opregion length check added in various functions > -ishtp_get_device and ishtp_put_device are removed > -acpi_walk_dep_device_list() changed to acpi_dev_clear_dependencies() > -Kconfig text, cosmetic and minor corrections > > v1: > -Initial Version > > MAINTAINERS | 6 + > drivers/platform/x86/Kconfig | 16 + > drivers/platform/x86/Makefile | 1 + > drivers/platform/x86/intel_ishtp_eclite.c | 699 ++++++++++++++++++++++ > 4 files changed, 722 insertions(+) > create mode 100644 drivers/platform/x86/intel_ishtp_eclite.c > > diff --git a/MAINTAINERS b/MAINTAINERS > index a61f4f3b78a9..bb2b5be3c745 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -9391,6 +9391,12 @@ L: linux-crypto@xxxxxxxxxxxxxxx > S: Maintained > F: drivers/crypto/ixp4xx_crypto.c > > +INTEL ISHTP ECLITE DRIVER > +M: Sumesh K Naduvalath <sumesh.k.naduvalath@xxxxxxxxx> > +L: platform-driver-x86@xxxxxxxxxxxxxxx > +S: Supported > +F: drivers/platform/x86/intel_ishtp_eclite.c > + > INTEL IXP4XX QMGR, NPE, ETHERNET and HSS SUPPORT > M: Krzysztof Halasa <khalasa@xxxxxxx> > S: Maintained > diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig > index 7d385c3b2239..ee5fe5e52033 100644 > --- a/drivers/platform/x86/Kconfig > +++ b/drivers/platform/x86/Kconfig > @@ -1173,6 +1173,22 @@ config INTEL_CHTDC_TI_PWRBTN > To compile this driver as a module, choose M here: the module > will be called intel_chtdc_ti_pwrbtn. > > +config INTEL_ISHTP_ECLITE > + tristate "Intel ISHTP eclite controller" > + depends on INTEL_ISH_HID > + depends on ACPI > + help > + This driver is for accessing the PSE (Programmable Service Engine), > + an Embedded Controller like IP, using ISHTP (Integrated Sensor Hub > + Transport Protocol) to get battery, thermal and UCSI (USB Type-C > + Connector System Software Interface) related data from the platform. > + Users who don't want to use discrete Embedded Controller on Intel's > + Elkhartlake platform, can leverage this integrated solution of > + ECLite which is part of PSE subsystem. > + > + To compile this driver as a module, choose M here: the module > + will be called intel_ishtp_eclite > + > config INTEL_MRFLD_PWRBTN > tristate "Intel Merrifield Basin Cove power button driver" > depends on INTEL_SOC_PMIC_MRFLD > diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile > index 7ee369aab10d..568c9c7d4173 100644 > --- a/drivers/platform/x86/Makefile > +++ b/drivers/platform/x86/Makefile > @@ -75,6 +75,7 @@ obj-$(CONFIG_INTEL_INT0002_VGPIO) += intel_int0002_vgpio.o > obj-$(CONFIG_INTEL_MENLOW) += intel_menlow.o > obj-$(CONFIG_INTEL_OAKTRAIL) += intel_oaktrail.o > obj-$(CONFIG_INTEL_VBTN) += intel-vbtn.o > +obj-$(CONFIG_INTEL_ISHTP_ECLITE) += intel_ishtp_eclite.o > > # MSI > obj-$(CONFIG_MSI_LAPTOP) += msi-laptop.o > diff --git a/drivers/platform/x86/intel_ishtp_eclite.c b/drivers/platform/x86/intel_ishtp_eclite.c > new file mode 100644 > index 000000000000..d5611b1a13df > --- /dev/null > +++ b/drivers/platform/x86/intel_ishtp_eclite.c > @@ -0,0 +1,699 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Intel ECLite opregion driver for talking to ECLite firmware running on > + * Intel Integrated Sensor Hub (ISH) using ISH Transport Protocol (ISHTP) > + * > + * Copyright (c) 2021, Intel Corporation. > + */ > + > +#include <linux/acpi.h> > +#include <linux/bitops.h> > +#include <linux/device.h> > +#include <linux/errno.h> > +#include <linux/intel-ish-client-if.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/mutex.h> > +#include <linux/slab.h> > +#include <linux/suspend.h> > +#include <linux/types.h> > +#include <linux/uuid.h> > +#include <linux/uaccess.h> > + > +#define ECLITE_DATA_OPREGION_ID 0x9E > +#define ECLITE_CMD_OPREGION_ID 0x9F > + > +#define ECL_MSG_DATA 0x1 > +#define ECL_MSG_EVENT 0x2 > + > +#define ECL_ISH_READ 0x1 > +#define ECL_ISH_WRITE 0x2 > +#define ECL_ISH_HEADER_VERSION 0 > + > +#define ECL_CL_RX_RING_SIZE 16 > +#define ECL_CL_TX_RING_SIZE 8 > + > +#define ECL_DATA_OPR_BUFLEN 384 > +#define ECL_EVENTS_NOTIFY 333 > + > +#define cmd_opr_offsetof(element) offsetof(struct opregion_cmd, element) > +#define cl_data_to_dev(opr_dev) ishtp_device((opr_dev)->cl_device) > + > +#ifndef BITS_TO_BYTES > +#define BITS_TO_BYTES(x) ((x) / 8) > +#endif > + > +struct opregion_cmd { > + unsigned int command; > + unsigned int offset; > + unsigned int length; > + unsigned int event_id; > +}; > + > +struct opregion_data { > + char data[ECL_DATA_OPR_BUFLEN]; > +}; > + > +struct opregion_context { > + struct opregion_cmd cmd_area; > + struct opregion_data data_area; > +}; > + > +struct ecl_message_header { > + unsigned int version:2; > + unsigned int data_type:2; > + unsigned int request_type:2; > + unsigned int offset:9; > + unsigned int data_len:9; > + unsigned int event:8; > +}; > + > +struct ecl_message { > + struct ecl_message_header header; > + char payload[ECL_DATA_OPR_BUFLEN]; > +}; > + > +struct ishtp_opregion_dev { > + struct opregion_context opr_context; > + struct ishtp_cl *ecl_ishtp_cl; > + struct ishtp_cl_device *cl_device; > + struct ishtp_fw_client *fw_client; > + struct ishtp_cl_rb *rb; > + struct acpi_device *adev; > + unsigned int dsm_event_id; > + unsigned int ish_link_ready; > + unsigned int ish_read_done; > + unsigned int acpi_init_done; > + wait_queue_head_t read_wait; > + struct work_struct event_work; > + struct work_struct reset_work; > + /* lock for opregion context */ > + struct mutex lock; > + > +}; > + > +/* eclite ishtp client UUID: 6a19cc4b-d760-4de3-b14d-f25ebd0fbcd9 */ > +static const guid_t ecl_ishtp_guid = > + GUID_INIT(0x6a19cc4b, 0xd760, 0x4de3, > + 0xb1, 0x4d, 0xf2, 0x5e, 0xbd, 0xf, 0xbc, 0xd9); > + > +/* ACPI DSM UUID: 91d936a7-1f01-49c6-a6b4-72f00ad8d8a5 */ > +static const guid_t ecl_acpi_guid = > + GUID_INIT(0x91d936a7, 0x1f01, 0x49c6, 0xa6, > + 0xb4, 0x72, 0xf0, 0x0a, 0xd8, 0xd8, 0xa5); > + > +/** > + * ecl_ish_cl_read() - Read data from eclite FW > + * > + * @opr_dev: pointer to opregion device > + * > + * This function issues a read request to eclite FW and waits until it > + * receives a response. When response is received the read data is copied to > + * opregion buffer. > + */ > +static int ecl_ish_cl_read(struct ishtp_opregion_dev *opr_dev) > +{ > + struct ecl_message_header header; > + int len, rv; > + > + if (!opr_dev->ish_link_ready) > + return -EIO; > + > + if ((opr_dev->opr_context.cmd_area.offset + > + opr_dev->opr_context.cmd_area.length) > ECL_DATA_OPR_BUFLEN) { > + return -EINVAL; > + } > + > + header.version = ECL_ISH_HEADER_VERSION; > + header.data_type = ECL_MSG_DATA; > + header.request_type = ECL_ISH_READ; > + header.offset = opr_dev->opr_context.cmd_area.offset; > + header.data_len = opr_dev->opr_context.cmd_area.length; > + header.event = opr_dev->opr_context.cmd_area.event_id; > + len = sizeof(header); > + > + opr_dev->ish_read_done = false; > + rv = ishtp_cl_send(opr_dev->ecl_ishtp_cl, (uint8_t *)&header, len); > + if (rv) { > + dev_err(cl_data_to_dev(opr_dev), "ish-read : send failed\n"); > + return -EIO; > + } > + > + dev_dbg(cl_data_to_dev(opr_dev), > + "[ish_rd] Req: off : %x, len : %x\n", > + header.offset, > + header.data_len); > + > + rv = wait_event_interruptible_timeout(opr_dev->read_wait, > + opr_dev->ish_read_done, > + 2 * HZ); > + if (!rv) { > + dev_err(cl_data_to_dev(opr_dev), > + "[ish_rd] No response from firmware\n"); > + return -EIO; > + } > + > + return 0; > +} > + > +/** > + * ecl_ish_cl_write() - This function writes data to eclite FW. > + * > + * @opr_dev: pointer to opregion device > + * > + * This function writes data to eclite FW. > + */ > +static int ecl_ish_cl_write(struct ishtp_opregion_dev *opr_dev) > +{ > + struct ecl_message message; > + int len; > + > + if (!opr_dev->ish_link_ready) > + return -EIO; > + > + if ((opr_dev->opr_context.cmd_area.offset + > + opr_dev->opr_context.cmd_area.length) > ECL_DATA_OPR_BUFLEN) { > + return -EINVAL; > + } > + > + message.header.version = ECL_ISH_HEADER_VERSION; > + message.header.data_type = ECL_MSG_DATA; > + message.header.request_type = ECL_ISH_WRITE; > + message.header.offset = opr_dev->opr_context.cmd_area.offset; > + message.header.data_len = opr_dev->opr_context.cmd_area.length; > + message.header.event = opr_dev->opr_context.cmd_area.event_id; > + len = sizeof(struct ecl_message_header) + message.header.data_len; > + > + memcpy(message.payload, > + opr_dev->opr_context.data_area.data + message.header.offset, > + message.header.data_len); > + > + dev_dbg(cl_data_to_dev(opr_dev), > + "[ish_wr] off : %x, len : %x\n", > + message.header.offset, > + message.header.data_len); > + > + return ishtp_cl_send(opr_dev->ecl_ishtp_cl, (uint8_t *)&message, len); > +} > + > +static acpi_status > +ecl_opregion_cmd_handler(u32 function, acpi_physical_address address, > + u32 bits, u64 *value64, > + void *handler_context, void *region_context) > +{ > + struct ishtp_opregion_dev *opr_dev; > + struct opregion_cmd *cmd; > + acpi_status status = AE_OK; > + > + if (!region_context || !value64) > + return AE_BAD_PARAMETER; > + > + if (function == ACPI_READ) > + return AE_ERROR; > + > + opr_dev = (struct ishtp_opregion_dev *)region_context; > + > + mutex_lock(&opr_dev->lock); > + > + cmd = &opr_dev->opr_context.cmd_area; > + > + switch (address) { > + case cmd_opr_offsetof(command): > + cmd->command = (u32)*value64; > + > + if (cmd->command == ECL_ISH_READ) > + status = ecl_ish_cl_read(opr_dev); > + else if (cmd->command == ECL_ISH_WRITE) > + status = ecl_ish_cl_write(opr_dev); > + else > + status = AE_ERROR; > + break; > + case cmd_opr_offsetof(offset): > + cmd->offset = (u32)*value64; > + break; > + case cmd_opr_offsetof(length): > + cmd->length = (u32)*value64; > + break; > + case cmd_opr_offsetof(event_id): > + cmd->event_id = (u32)*value64; > + break; > + default: > + status = AE_ERROR; > + } > + > + mutex_unlock(&opr_dev->lock); > + > + return status; > +} > + > +static acpi_status > +ecl_opregion_data_handler(u32 function, acpi_physical_address address, > + u32 bits, u64 *value64, > + void *handler_context, void *region_context) > +{ > + struct ishtp_opregion_dev *opr_dev; > + unsigned int bytes = BITS_TO_BYTES(bits); > + void *data_addr; > + > + if (!region_context || !value64) > + return AE_BAD_PARAMETER; > + > + if (address + bytes > ECL_DATA_OPR_BUFLEN) > + return AE_BAD_PARAMETER; > + > + opr_dev = (struct ishtp_opregion_dev *)region_context; > + > + mutex_lock(&opr_dev->lock); > + > + data_addr = &opr_dev->opr_context.data_area.data[address]; > + > + if (function == ACPI_READ) { > + memcpy(value64, data_addr, bytes); > + } else if (function == ACPI_WRITE) { > + memcpy(data_addr, value64, bytes); > + } else { > + mutex_unlock(&opr_dev->lock); > + return AE_BAD_PARAMETER; > + } > + > + mutex_unlock(&opr_dev->lock); > + > + return AE_OK; > +} > + > +static int acpi_find_eclite_device(struct ishtp_opregion_dev *opr_dev) > +{ > + struct acpi_device *adev; > + > + /* Find ECLite device and install opregion handlers */ > + adev = acpi_dev_get_first_match_dev("INTC1035", NULL, -1); > + if (!adev) { > + dev_err(cl_data_to_dev(opr_dev), "eclite ACPI device not found\n"); > + return -ENODEV; > + } > + > + opr_dev->adev = adev; > + acpi_dev_put(adev); > + > + return 0; > +} > + > +static int acpi_opregion_init(struct ishtp_opregion_dev *opr_dev) > +{ > + acpi_status status; > + > + status = acpi_install_address_space_handler(opr_dev->adev->handle, > + ECLITE_CMD_OPREGION_ID, > + ecl_opregion_cmd_handler, > + NULL, opr_dev); > + if (ACPI_FAILURE(status)) { > + dev_err(cl_data_to_dev(opr_dev), > + "cmd space handler install failed\n"); > + return -ENODEV; > + } > + > + status = acpi_install_address_space_handler(opr_dev->adev->handle, > + ECLITE_DATA_OPREGION_ID, > + ecl_opregion_data_handler, > + NULL, opr_dev); > + if (ACPI_FAILURE(status)) { > + dev_err(cl_data_to_dev(opr_dev), > + "data space handler install failed\n"); > + > + acpi_remove_address_space_handler(opr_dev->adev->handle, > + ECLITE_CMD_OPREGION_ID, > + ecl_opregion_cmd_handler); > + return -ENODEV; > + } > + opr_dev->acpi_init_done = true; > + > + dev_dbg(cl_data_to_dev(opr_dev), "Opregion handlers are installed\n"); > + > + return 0; > +} > + > +static void acpi_opregion_deinit(struct ishtp_opregion_dev *opr_dev) > +{ > + acpi_remove_address_space_handler(opr_dev->adev->handle, > + ECLITE_CMD_OPREGION_ID, > + ecl_opregion_cmd_handler); > + > + acpi_remove_address_space_handler(opr_dev->adev->handle, > + ECLITE_DATA_OPREGION_ID, > + ecl_opregion_data_handler); > + opr_dev->acpi_init_done = false; > +} > + > +static void ecl_acpi_invoke_dsm(struct work_struct *work) > +{ > + struct ishtp_opregion_dev *opr_dev; > + union acpi_object *obj; > + > + opr_dev = container_of(work, struct ishtp_opregion_dev, event_work); > + if (!opr_dev->acpi_init_done) > + return; > + > + obj = acpi_evaluate_dsm(opr_dev->adev->handle, &ecl_acpi_guid, 0, > + opr_dev->dsm_event_id, NULL); > + if (!obj) { > + dev_warn(cl_data_to_dev(opr_dev), "_DSM fn call failed\n"); > + return; > + } > + > + dev_dbg(cl_data_to_dev(opr_dev), "Exec DSM function code: %d success\n", > + opr_dev->dsm_event_id); > + > + ACPI_FREE(obj); > +} > + > +static void ecl_ish_process_rx_data(struct ishtp_opregion_dev *opr_dev) > +{ > + struct ecl_message *message = > + (struct ecl_message *)opr_dev->rb->buffer.data; > + > + dev_dbg(cl_data_to_dev(opr_dev), > + "[ish_rd] Resp: off : %x, len : %x\n", > + message->header.offset, > + message->header.data_len); > + > + if ((message->header.offset + message->header.data_len) > > + ECL_DATA_OPR_BUFLEN) { > + return; > + } > + > + memcpy(opr_dev->opr_context.data_area.data + message->header.offset, > + message->payload, message->header.data_len); > + > + opr_dev->ish_read_done = true; > + wake_up_interruptible(&opr_dev->read_wait); > +} > + > +static void ecl_ish_process_rx_event(struct ishtp_opregion_dev *opr_dev) > +{ > + struct ecl_message_header *header = > + (struct ecl_message_header *)opr_dev->rb->buffer.data; > + > + dev_dbg(cl_data_to_dev(opr_dev), > + "[ish_ev] Evt received: %8x\n", header->event); > + > + opr_dev->dsm_event_id = header->event; > + schedule_work(&opr_dev->event_work); > +} > + > +static int ecl_ish_cl_enable_events(struct ishtp_opregion_dev *opr_dev, > + bool config_enable) > +{ > + struct ecl_message message; > + int len; > + > + message.header.version = ECL_ISH_HEADER_VERSION; > + message.header.data_type = ECL_MSG_DATA; > + message.header.request_type = ECL_ISH_WRITE; > + message.header.offset = ECL_EVENTS_NOTIFY; > + message.header.data_len = 1; > + message.payload[0] = config_enable; > + > + len = sizeof(struct ecl_message_header) + message.header.data_len; > + > + return ishtp_cl_send(opr_dev->ecl_ishtp_cl, (uint8_t *)&message, len); > +} > + > +static void ecl_ishtp_cl_event_cb(struct ishtp_cl_device *cl_device) > +{ > + struct ishtp_cl *ecl_ishtp_cl = ishtp_get_drvdata(cl_device); > + struct ishtp_opregion_dev *opr_dev; > + struct ecl_message_header *header; > + struct ishtp_cl_rb *rb; > + > + opr_dev = ishtp_get_client_data(ecl_ishtp_cl); > + while ((rb = ishtp_cl_rx_get_rb(opr_dev->ecl_ishtp_cl)) != NULL) { > + opr_dev->rb = rb; > + header = (struct ecl_message_header *)rb->buffer.data; > + > + if (header->data_type == ECL_MSG_DATA) > + ecl_ish_process_rx_data(opr_dev); > + else if (header->data_type == ECL_MSG_EVENT) > + ecl_ish_process_rx_event(opr_dev); > + else > + /* Got an event with wrong data_type, ignore it */ > + dev_err(cl_data_to_dev(opr_dev), > + "[ish_cb] Received wrong data_type\n"); > + > + ishtp_cl_io_rb_recycle(rb); > + } > +} > + > +static int ecl_ishtp_cl_init(struct ishtp_cl *ecl_ishtp_cl) > +{ > + struct ishtp_opregion_dev *opr_dev = > + ishtp_get_client_data(ecl_ishtp_cl); > + struct ishtp_fw_client *fw_client; > + struct ishtp_device *dev; > + int rv; > + > + rv = ishtp_cl_link(ecl_ishtp_cl); > + if (rv) { > + dev_err(cl_data_to_dev(opr_dev), "ishtp_cl_link failed\n"); > + return rv; > + } > + > + dev = ishtp_get_ishtp_device(ecl_ishtp_cl); > + > + /* Connect to FW client */ > + ishtp_set_tx_ring_size(ecl_ishtp_cl, ECL_CL_TX_RING_SIZE); > + ishtp_set_rx_ring_size(ecl_ishtp_cl, ECL_CL_RX_RING_SIZE); > + > + fw_client = ishtp_fw_cl_get_client(dev, &ecl_ishtp_guid); > + if (!fw_client) { > + dev_err(cl_data_to_dev(opr_dev), "fw client not found\n"); > + return -ENOENT; > + } > + > + ishtp_cl_set_fw_client_id(ecl_ishtp_cl, > + ishtp_get_fw_client_id(fw_client)); > + > + ishtp_set_connection_state(ecl_ishtp_cl, ISHTP_CL_CONNECTING); > + > + rv = ishtp_cl_connect(ecl_ishtp_cl); > + if (rv) { > + dev_err(cl_data_to_dev(opr_dev), "client connect failed\n"); > + > + ishtp_cl_unlink(ecl_ishtp_cl); > + return rv; > + } > + > + dev_dbg(cl_data_to_dev(opr_dev), "Host connected to fw client\n"); > + > + return 0; > +} > + > +static void ecl_ishtp_cl_deinit(struct ishtp_cl *ecl_ishtp_cl) > +{ > + ishtp_cl_unlink(ecl_ishtp_cl); > + ishtp_cl_flush_queues(ecl_ishtp_cl); > + ishtp_cl_free(ecl_ishtp_cl); > +} > + > +static void ecl_ishtp_cl_reset_handler(struct work_struct *work) > +{ > + struct ishtp_opregion_dev *opr_dev; > + struct ishtp_cl_device *cl_device; > + struct ishtp_cl *ecl_ishtp_cl; > + int rv; > + int retry; > + > + opr_dev = container_of(work, struct ishtp_opregion_dev, reset_work); > + > + opr_dev->ish_link_ready = false; > + > + cl_device = opr_dev->cl_device; > + ecl_ishtp_cl = opr_dev->ecl_ishtp_cl; > + > + ecl_ishtp_cl_deinit(ecl_ishtp_cl); > + > + ecl_ishtp_cl = ishtp_cl_allocate(cl_device); > + if (!ecl_ishtp_cl) > + return; > + > + ishtp_set_drvdata(cl_device, ecl_ishtp_cl); > + ishtp_set_client_data(ecl_ishtp_cl, opr_dev); > + > + opr_dev->ecl_ishtp_cl = ecl_ishtp_cl; > + > + for (retry = 0; retry < 3; ++retry) { > + rv = ecl_ishtp_cl_init(ecl_ishtp_cl); > + if (!rv) > + break; > + } > + if (rv) { > + ishtp_cl_free(ecl_ishtp_cl); > + opr_dev->ecl_ishtp_cl = NULL; > + dev_err(cl_data_to_dev(opr_dev), > + "[ish_rst] Reset failed. Link not ready.\n"); > + return; > + } > + > + ishtp_register_event_cb(cl_device, ecl_ishtp_cl_event_cb); > + dev_info(cl_data_to_dev(opr_dev), > + "[ish_rst] Reset Success. Link ready.\n"); > + > + opr_dev->ish_link_ready = true; > + > + if (opr_dev->acpi_init_done) > + return; > + > + rv = acpi_opregion_init(opr_dev); > + if (rv) { > + dev_err(cl_data_to_dev(opr_dev), > + "ACPI opregion init failed\n"); > + } > +} > + > +static int ecl_ishtp_cl_probe(struct ishtp_cl_device *cl_device) > +{ > + struct ishtp_cl *ecl_ishtp_cl; > + struct ishtp_opregion_dev *opr_dev; > + int rv; > + > + opr_dev = devm_kzalloc(ishtp_device(cl_device), sizeof(*opr_dev), > + GFP_KERNEL); > + if (!opr_dev) > + return -ENOMEM; > + > + ecl_ishtp_cl = ishtp_cl_allocate(cl_device); > + if (!ecl_ishtp_cl) > + return -ENOMEM; > + > + ishtp_set_drvdata(cl_device, ecl_ishtp_cl); > + ishtp_set_client_data(ecl_ishtp_cl, opr_dev); > + opr_dev->ecl_ishtp_cl = ecl_ishtp_cl; > + opr_dev->cl_device = cl_device; > + > + init_waitqueue_head(&opr_dev->read_wait); > + INIT_WORK(&opr_dev->event_work, ecl_acpi_invoke_dsm); > + INIT_WORK(&opr_dev->reset_work, ecl_ishtp_cl_reset_handler); > + > + /* Initialize ish client device */ > + rv = ecl_ishtp_cl_init(ecl_ishtp_cl); > + if (rv) { > + dev_err(cl_data_to_dev(opr_dev), "Client init failed\n"); > + goto err_exit; > + } > + > + dev_dbg(cl_data_to_dev(opr_dev), "eclite-ishtp client initialised\n"); > + > + /* Register a handler for eclite fw events */ > + ishtp_register_event_cb(cl_device, ecl_ishtp_cl_event_cb); > + > + opr_dev->ish_link_ready = true; > + mutex_init(&opr_dev->lock); > + > + /* Now find ACPI device and init opregion handlers */ > + rv = acpi_find_eclite_device(opr_dev); > + if (rv) { > + dev_err(cl_data_to_dev(opr_dev), "ECLite ACPI ID not found\n"); > + goto err_exit; > + } > + rv = acpi_opregion_init(opr_dev); > + if (rv) { > + dev_err(cl_data_to_dev(opr_dev), "ACPI opregion init failed\n"); > + goto err_exit; > + } > + > + /* Reprobe devices depending on ECLite - battery, fan, etc. */ > + acpi_dev_clear_dependencies(opr_dev->adev); > + > + return 0; > +err_exit: > + ishtp_set_connection_state(ecl_ishtp_cl, ISHTP_CL_DISCONNECTING); > + ishtp_cl_disconnect(ecl_ishtp_cl); > + ecl_ishtp_cl_deinit(ecl_ishtp_cl); > + > + return rv; > +} > + > +static void ecl_ishtp_cl_remove(struct ishtp_cl_device *cl_device) > +{ > + struct ishtp_cl *ecl_ishtp_cl = ishtp_get_drvdata(cl_device); > + struct ishtp_opregion_dev *opr_dev = > + ishtp_get_client_data(ecl_ishtp_cl); > + > + if (opr_dev->acpi_init_done) > + acpi_opregion_deinit(opr_dev); > + > + cancel_work_sync(&opr_dev->reset_work); > + cancel_work_sync(&opr_dev->event_work); > + > + ishtp_set_connection_state(ecl_ishtp_cl, ISHTP_CL_DISCONNECTING); > + ishtp_cl_disconnect(ecl_ishtp_cl); > + ecl_ishtp_cl_deinit(ecl_ishtp_cl); > +} > + > +static int ecl_ishtp_cl_reset(struct ishtp_cl_device *cl_device) > +{ > + struct ishtp_cl *ecl_ishtp_cl = ishtp_get_drvdata(cl_device); > + struct ishtp_opregion_dev *opr_dev = > + ishtp_get_client_data(ecl_ishtp_cl); > + > + schedule_work(&opr_dev->reset_work); > + > + return 0; > +} > + > +static int ecl_ishtp_cl_suspend(struct device *device) > +{ > + struct ishtp_cl_device *cl_device = ishtp_dev_to_cl_device(device); > + struct ishtp_cl *ecl_ishtp_cl = ishtp_get_drvdata(cl_device); > + struct ishtp_opregion_dev *opr_dev = > + ishtp_get_client_data(ecl_ishtp_cl); > + > + if (acpi_target_system_state() == ACPI_STATE_S0) > + return 0; > + > + acpi_opregion_deinit(opr_dev); > + ecl_ish_cl_enable_events(opr_dev, false); > + > + return 0; > +} > + > +static int ecl_ishtp_cl_resume(struct device *device) > +{ > + /* A reset is expected to call after an Sx. At this point > + * we are not sure if the link is up or not to restore anything, > + * so do nothing in resume path > + */ > + return 0; > +} > + > +static const struct dev_pm_ops ecl_ishtp_pm_ops = { > + .suspend = ecl_ishtp_cl_suspend, > + .resume = ecl_ishtp_cl_resume, > +}; > + > +static struct ishtp_cl_driver ecl_ishtp_cl_driver = { > + .name = "ishtp-eclite", > + .guid = &ecl_ishtp_guid, > + .probe = ecl_ishtp_cl_probe, > + .remove = ecl_ishtp_cl_remove, > + .reset = ecl_ishtp_cl_reset, > + .driver.pm = &ecl_ishtp_pm_ops, > +}; > + > +static int __init ecl_ishtp_init(void) > +{ > + return ishtp_cl_driver_register(&ecl_ishtp_cl_driver, THIS_MODULE); > +} > + > +static void __exit ecl_ishtp_exit(void) > +{ > + return ishtp_cl_driver_unregister(&ecl_ishtp_cl_driver); > +} > + > +late_initcall(ecl_ishtp_init); > +module_exit(ecl_ishtp_exit); > + > +MODULE_DESCRIPTION("ISH ISHTP eclite client opregion driver"); > +MODULE_AUTHOR("K Naduvalath, Sumesh <sumesh.k.naduvalath@xxxxxxxxx>"); > + > +MODULE_LICENSE("GPL v2"); > +MODULE_ALIAS("ishtp:*"); >