Re: [PATCH Part2 RFC v4 09/40] x86/fault: Add support to dump RMP entry on fault

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Dave,


On 7/7/21 2:21 PM, Dave Hansen wrote:
@@ -502,6 +503,81 @@ static void show_ldttss(const struct desc_ptr *gdt, const char *name, u16 index)
  		 name, index, addr, (desc.limit0 | (desc.limit1 << 16)));
  }
+static void dump_rmpentry(unsigned long address)
+{

A comment on this sucker would be nice.  I *think* this must be a kernel
virtual address.  Reflecting that into the naming or a comment would be
nice.

Ack, I will add some comment.


+	struct rmpentry *e;
+	unsigned long pfn;
+	pgd_t *pgd;
+	pte_t *pte;
+	int level;
+
+	pgd = __va(read_cr3_pa());
+	pgd += pgd_index(address);
+
+	pte = lookup_address_in_pgd(pgd, address, &level);
+	if (unlikely(!pte))
+		return;

It's a little annoying this is doing *another* separate page walk.
Don't we already do this for dumping the page tables themselves at oops
time?


Yes, we already do the walk in oops function, I'll extend the dump_rmpentry() to use the level from the oops to avoid the duplicate walk.


Also, please get rid of all of the likely/unlikely()s in your patches.
They are pure noise unless you have specific knowledge of the compiler
getting something so horribly wrong that it affects real-world performance.

+	switch (level) {
+	case PG_LEVEL_4K: {
+		pfn = pte_pfn(*pte);
+		break;
+	}

These superfluous brackets are really strange looking.  Could you remove
them, please?

Noted.


+	case PG_LEVEL_2M: {
+		pfn = pmd_pfn(*(pmd_t *)pte);
+		break;
+	}
+	case PG_LEVEL_1G: {
+		pfn = pud_pfn(*(pud_t *)pte);
+		break;
+	}
+	case PG_LEVEL_512G: {
+		pfn = p4d_pfn(*(p4d_t *)pte);
+		break;
+	}
+	default:
+		return;
+	}
+
+	e = snp_lookup_page_in_rmptable(pfn_to_page(pfn), &level);

So, lookup_address_in_pgd() looks to me like it will return pretty
random page table entries as long as the entry isn't
p{gd,4d,ud,md,te}_none().  It can certainly return !p*_present()
entries.  Those are *NOT* safe to call pfn_to_page() on.


I will add some checks to make sure that we are accessing only safe pfn's.

+	if (unlikely(!e))
+		return;
+
+	/*
+	 * If the RMP entry at the faulting address was not assigned, then
+	 * dump may not provide any useful debug information. Iterate
+	 * through the entire 2MB region, and dump the RMP entries if one
+	 * of the bit in the RMP entry is set.
+	 */

Some of this comment should be moved down to the loop itself.

Noted.


+	if (rmpentry_assigned(e)) {
+		pr_alert("RMPEntry paddr 0x%lx [assigned=%d immutable=%d pagesize=%d gpa=0x%lx"
+			" asid=%d vmsa=%d validated=%d]\n", pfn << PAGE_SHIFT,
+			rmpentry_assigned(e), rmpentry_immutable(e), rmpentry_pagesize(e),
+			rmpentry_gpa(e), rmpentry_asid(e), rmpentry_vmsa(e),
+			rmpentry_validated(e));
+
+		pr_alert("RMPEntry paddr 0x%lx %016llx %016llx\n", pfn << PAGE_SHIFT,
+			e->high, e->low);

Could you please include an entire oops in the changelog that also
includes this information?  It would be really nice if this was at least
consistent in style to the stuff around it.

Here is one example: (in this case page was immutable and HV attempted to write to it).

BUG: unable to handle page fault for address: ffff98c78ee00000
#PF: supervisor write access in kernel mode
#PF: error_code(0x80000003) - rmp violation
PGD 304b201067 P4D 304b201067 PUD 20c7f06063 PMD 20c8976063 PTE 80000020cee00163 RMPEntry paddr 0x20cee00000 [assigned=1 immutable=1 pagesize=0 gpa=0x0 asid=0 vmsa=0 validated=0]
RMPEntry paddr 0x20cee00000 000000000000000f 8000000000000ffd



Also, how much of this stuff like rmpentry_asid() is duplicated in the
"raw" dump of e->high and e->low?


Most of the rmpentry_xxx assessors read the e->low. The RMP entry is a 16-bytes. AMD APM defines only a few bits and keeps everything else reserved. We are in the process of updating APM to document few more bits. I am not adding assessors for the undocumented fields. Until then, we dump the entire 16-bytes.

I agree that we are duplicating the information. I can live with just a raw dump. That means anyone who is debugging the crash will look at the APM to decode the fields.


+	} else {
+		unsigned long pfn_end;
+
+		pfn = pfn & ~0x1ff;

There's a nice magic number.  Why not:

	pfn = pfn & ~(PTRS_PER_PMD-1);

?

Noted.


This also needs a comment about *WHY* this case is looking at a 2MB region.


Actually the comment above says why we are looking for the 2MB region. Let me rearrange the comment block so that its more clear.

The reason for iterating through 2MB region is; if the faulting address is not assigned in the RMP table, and page table walk level is 2MB then one of entry within the large page is the root cause of the fault. Since we don't know which entry hence I dump all the non-zero entries.


+		pfn_end = pfn + PTRS_PER_PMD;
+
+		while (pfn < pfn_end) {
+			e = snp_lookup_page_in_rmptable(pfn_to_page(pfn), &level);
+
+			if (unlikely(!e))
+				return;
+
+			if (e->low || e->high)
+				pr_alert("RMPEntry paddr 0x%lx: %016llx %016llx\n",
+					pfn << PAGE_SHIFT, e->high, e->low);

Why does this dump "raw" RMP entries while the above stuff filters them
through a bunch of helper macros?


There are two cases which we need to consider:

1) the faulting page is a guest private (aka assigned)
2) the faulting page is a hypervisor (aka shared)

We will be primarily seeing #1. In this case, we know its a assigned page, and we can decode the fields.

The #2 will happen in rare conditions, if it happens, one of the undocumented bit in the RMP entry can provide us some useful information hence we dump the raw values.

-Brijesh



[Index of Archives]     [Linux Kernel Development]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux