In Windows the ASUS Armory Crate progrm can enable or disable the
dGPU via a WMI call. This functions much the same as various Linux
methods in software where the dGPU is removed from the device tree.
However the WMI call saves the state of dGPU enabled or not and this
then changes the dGPU visibility in Linux with no way for Linux
users to re-enable it. We expose the WMI method so users can see
and change the dGPU ACPI state.
Signed-off-by: Luke D. Jones <luke@xxxxxxxxxx>
---
drivers/platform/x86/asus-wmi.c | 98 ++++++++++++++++++++++
include/linux/platform_data/x86/asus-wmi.h | 3 +
2 files changed, 101 insertions(+)
diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
index 2468076d6cd8..8dc3f7ed021f 100644
--- a/drivers/platform/x86/asus-wmi.c
+++ b/drivers/platform/x86/asus-wmi.c
@@ -210,6 +210,9 @@ struct asus_wmi {
u8 fan_boost_mode_mask;
u8 fan_boost_mode;
+ bool dgpu_disable_available;
+ u8 dgpu_disable_mode;
+
bool throttle_thermal_policy_available;
u8 throttle_thermal_policy_mode;
@@ -427,6 +430,93 @@ static void lid_flip_tablet_mode_get_state(struct asus_wmi *asus)
}
}
+/* dGPU ********************************************************************/
+static int dgpu_disable_check_present(struct asus_wmi *asus)
+{
+ u32 result;
+ int err;
+
+ asus->dgpu_disable_available = false;
+
+ err = asus_wmi_get_devstate(asus, ASUS_WMI_DEVID_DGPU, &result);
+ if (err) {
+ if (err == -ENODEV)
+ return 0;
+ return err;
+ }
+
+ if (result & ASUS_WMI_DSTS_PRESENCE_BIT)
+ asus->dgpu_disable_available = true;
+ asus->dgpu_disable_mode = result & ASUS_WMI_DSTS_STATUS_BIT;
+
+ return 0;
+}
+
+static int dgpu_disable_write(struct asus_wmi *asus)
+{
+ int err;
+ u8 value;
+ u32 retval;
+
+ value = asus->dgpu_disable_mode;
+
+ err = asus_wmi_set_devstate(ASUS_WMI_DEVID_DGPU, value, &retval);
+
+ sysfs_notify(&asus->platform_device->dev.kobj, NULL,
+ "dgpu_disable");
+
+ if (err) {
+ pr_warn("Failed to set dgpu disable: %d\n", err);
+ return err;
+ }
+
+ if (retval > 1 || retval < 0) {
+ pr_warn("Failed to set dgpu disable (retval): 0x%x\n",
+ retval);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static ssize_t dgpu_disable_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct asus_wmi *asus = dev_get_drvdata(dev);
+ u8 mode = asus->dgpu_disable_mode;
+
+ return scnprintf(buf, PAGE_SIZE, "%d\n", mode);
+}
+
+static ssize_t dgpu_disable_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int result;
+ u8 disable;
+ struct asus_wmi *asus = dev_get_drvdata(dev);
+
+ result = kstrtou8(buf, 10, &disable);
+ if (result < 0)
+ return result;
+
+ if (disable > 1 || disable < 0)
+ return -EINVAL;
+
+ asus->dgpu_disable_mode = disable;
+ /*
+ * The ACPI call used does not save the mode unless the call is run twice.
+ * Once to disable, then once to check status and save - this is two code
+ * paths in the method in the ACPI dumps.
+ */
+ dgpu_disable_write(asus);
+ dgpu_disable_write(asus);
+
+ return count;
+}
+
+static DEVICE_ATTR_RW(dgpu_disable);
+
/* Battery ********************************************************************/
/* The battery maximum charging percentage */
@@ -2412,6 +2502,7 @@ static struct attribute *platform_attributes[] = {
&dev_attr_camera.attr,
&dev_attr_cardr.attr,
&dev_attr_touchpad.attr,
+ &dev_attr_dgpu_disable.attr,
&dev_attr_lid_resume.attr,
&dev_attr_als_enable.attr,
&dev_attr_fan_boost_mode.attr,
@@ -2438,6 +2529,8 @@ static umode_t asus_sysfs_is_visible(struct kobject *kobj,
devid = ASUS_WMI_DEVID_LID_RESUME;
else if (attr == &dev_attr_als_enable.attr)
devid = ASUS_WMI_DEVID_ALS_ENABLE;
+ else if (attr == &dev_attr_dgpu_disable.attr)
+ ok = asus->dgpu_disable_available;
else if (attr == &dev_attr_fan_boost_mode.attr)
ok = asus->fan_boost_mode_available;
else if (attr == &dev_attr_throttle_thermal_policy.attr)
@@ -2699,6 +2792,10 @@ static int asus_wmi_add(struct platform_device *pdev)
if (err)
goto fail_platform;
+ err = dgpu_disable_check_present(asus);
+ if (err)
+ goto fail_dgpu_disable;
+
err = fan_boost_mode_check_present(asus);
if (err)
goto fail_fan_boost_mode;
@@ -2799,6 +2896,7 @@ static int asus_wmi_add(struct platform_device *pdev)
fail_sysfs:
fail_throttle_thermal_policy:
fail_fan_boost_mode:
+fail_dgpu_disable:
fail_platform:
fail_panel_od:
kfree(asus);
diff --git a/include/linux/platform_data/x86/asus-wmi.h b/include/linux/platform_data/x86/asus-wmi.h
index 428aea701c7b..a528f9d0e4b7 100644
--- a/include/linux/platform_data/x86/asus-wmi.h
+++ b/include/linux/platform_data/x86/asus-wmi.h
@@ -90,6 +90,9 @@
/* Keyboard dock */
#define ASUS_WMI_DEVID_KBD_DOCK 0x00120063
+/* dgpu on/off */
+#define ASUS_WMI_DEVID_DGPU 0x00090020
+
/* DSTS masks */
#define ASUS_WMI_DSTS_STATUS_BIT 0x00000001
#define ASUS_WMI_DSTS_UNKNOWN_BIT 0x00000002
--
2.31.1
