It was lately understood that the current mechanism available in the driver to get SMU firmware info works only on internal SMU builds and there is a separate way to get all the SMU logging counters (addressed in the next patch). Hence remove all the smu info shown via debugfs as it is no more useful. Fixes: 156ec4731cb2 ("platform/x86: amd-pmc: Add AMD platform support for S2Idle") Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx> --- v2: split patch2 into two as suggested by Hans drivers/platform/x86/amd-pmc.c | 11 ----------- 1 file changed, 11 deletions(-) diff --git a/drivers/platform/x86/amd-pmc.c b/drivers/platform/x86/amd-pmc.c index 9c8a53120767..1016a3415208 100644 --- a/drivers/platform/x86/amd-pmc.c +++ b/drivers/platform/x86/amd-pmc.c @@ -52,7 +52,6 @@ #define AMD_CPU_ID_PCO AMD_CPU_ID_RV #define AMD_CPU_ID_CZN AMD_CPU_ID_RN -#define AMD_SMU_FW_VERSION 0x0 #define PMC_MSG_DELAY_MIN_US 100 #define RESPONSE_REGISTER_LOOP_MAX 200 @@ -88,11 +87,6 @@ static inline void amd_pmc_reg_write(struct amd_pmc_dev *dev, int reg_offset, u3 #ifdef CONFIG_DEBUG_FS static int smu_fw_info_show(struct seq_file *s, void *unused) { - struct amd_pmc_dev *dev = s->private; - u32 value; - - value = ioread32(dev->smu_base + AMD_SMU_FW_VERSION); - seq_printf(s, "SMU FW Info: %x\n", value); return 0; } DEFINE_SHOW_ATTRIBUTE(smu_fw_info); @@ -256,17 +250,12 @@ static int amd_pmc_probe(struct platform_device *pdev) pci_dev_put(rdev); base_addr = ((u64)base_addr_hi << 32 | base_addr_lo); - dev->smu_base = devm_ioremap(dev->dev, base_addr, AMD_PMC_MAPPING_SIZE); - if (!dev->smu_base) - return -ENOMEM; - dev->regbase = devm_ioremap(dev->dev, base_addr + AMD_PMC_BASE_ADDR_OFFSET, AMD_PMC_MAPPING_SIZE); if (!dev->regbase) return -ENOMEM; amd_pmc_dump_registers(dev); - platform_set_drvdata(pdev, dev); amd_pmc_dbgfs_register(dev); return 0; -- 2.25.1