disable_irq() after request_irq() still has a time gap in which interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will disable IRQ auto-enable because of requesting. this patch is made base on "add IRQF_NO_AUTOEN for request_irq" which is being merged: https://lore.kernel.org/patchwork/patch/1388765/ Signed-off-by: Tian Tao <tiantao6@xxxxxxxxxxxxx> --- drivers/platform/surface/aggregator/controller.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/platform/surface/aggregator/controller.c b/drivers/platform/surface/aggregator/controller.c index aa6f37b..00e3828 100644 --- a/drivers/platform/surface/aggregator/controller.c +++ b/drivers/platform/surface/aggregator/controller.c @@ -2483,7 +2483,8 @@ int ssam_irq_setup(struct ssam_controller *ctrl) * interrupt, and let the SAM resume callback during the controller * resume process clear it. */ - const int irqf = IRQF_SHARED | IRQF_ONESHOT | IRQF_TRIGGER_RISING; + const int irqf = IRQF_SHARED | IRQF_ONESHOT | + IRQF_TRIGGER_RISING | IRQF_NO_AUTOEN; gpiod = gpiod_get(dev, "ssam_wakeup-int", GPIOD_ASIS); if (IS_ERR(gpiod)) @@ -2501,7 +2502,6 @@ int ssam_irq_setup(struct ssam_controller *ctrl) return status; ctrl->irq.num = irq; - disable_irq(ctrl->irq.num); return 0; } -- 2.7.4
